From: Brett Creeley <brett.creeley@intel.com>
Date: Thu, 13 Feb 2020 13:31:23 -0800
Subject: ice: Don't reject odd values of usecs set by user
Patch-mainline: v5.6-rc3
Git-commit: 840f8ad0aaf20044e2fb099095bbce27c02f58da
References: jsc#SLE-12878
Currently if a user sets an odd [tx|rx]-usecs value through ethtool,
the request is denied because the hardware is set to have an ITR
granularity of 2us. This caused poor customer experience. Fix this by
aligning to a register allowed value, which results in rounding down.
Also, print a once per ring container type message to be clear about
our intentions.
Also, change the ITR_TO_REG define to be the bitwise and of the ITR
setting and the ICE_ITR_MASK. This makes the purpose of ITR_TO_REG more
obvious.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
drivers/net/ethernet/intel/ice/ice_ethtool.c | 49 ++++++++++++++++++++-------
drivers/net/ethernet/intel/ice/ice_txrx.h | 2 -
2 files changed, 39 insertions(+), 12 deletions(-)
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -3489,21 +3489,13 @@ ice_set_rc_coalesce(enum ice_container_t
return -EINVAL;
}
- /* hardware only supports an ITR granularity of 2us */
- if (coalesce_usecs % 2 != 0) {
- netdev_info(vsi->netdev, "Invalid value, %s-usecs must be even\n",
- c_type_str);
- return -EINVAL;
- }
-
if (use_adaptive_coalesce) {
rc->itr_setting |= ICE_ITR_DYNAMIC;
} else {
- /* store user facing value how it was set */
+ /* save the user set usecs */
rc->itr_setting = coalesce_usecs;
- /* set to static and convert to value HW understands */
- rc->target_itr =
- ITR_TO_REG(ITR_REG_ALIGN(rc->itr_setting));
+ /* device ITR granularity is in 2 usec increments */
+ rc->target_itr = ITR_REG_ALIGN(rc->itr_setting);
}
return 0;
@@ -3597,6 +3589,30 @@ ice_is_coalesce_param_invalid(struct net
}
/**
+ * ice_print_if_odd_usecs - print message if user tries to set odd [tx|rx]-usecs
+ * @netdev: netdev used for print
+ * @itr_setting: previous user setting
+ * @use_adaptive_coalesce: if adaptive coalesce is enabled or being enabled
+ * @coalesce_usecs: requested value of [tx|rx]-usecs
+ * @c_type_str: either "rx" or "tx" to match user set field of [tx|rx]-usecs
+ */
+static void
+ice_print_if_odd_usecs(struct net_device *netdev, u16 itr_setting,
+ u32 use_adaptive_coalesce, u32 coalesce_usecs,
+ const char *c_type_str)
+{
+ if (use_adaptive_coalesce)
+ return;
+
+ itr_setting = ITR_TO_REG(itr_setting);
+
+ if (itr_setting != coalesce_usecs && (coalesce_usecs % 2))
+ netdev_info(netdev, "User set %s-usecs to %d, device only supports even values. Rounding down and attempting to set %s-usecs to %d\n",
+ c_type_str, coalesce_usecs, c_type_str,
+ ITR_REG_ALIGN(coalesce_usecs));
+}
+
+/**
* __ice_set_coalesce - set ITR/INTRL values for the device
* @netdev: pointer to the netdev associated with this query
* @ec: ethtool structure to fill with driver's coalesce settings
@@ -3616,8 +3632,19 @@ __ice_set_coalesce(struct net_device *ne
return -EINVAL;
if (q_num < 0) {
+ struct ice_q_vector *q_vector = vsi->q_vectors[0];
int v_idx;
+ if (q_vector) {
+ ice_print_if_odd_usecs(netdev, q_vector->rx.itr_setting,
+ ec->use_adaptive_rx_coalesce,
+ ec->rx_coalesce_usecs, "rx");
+
+ ice_print_if_odd_usecs(netdev, q_vector->tx.itr_setting,
+ ec->use_adaptive_tx_coalesce,
+ ec->tx_coalesce_usecs, "tx");
+ }
+
ice_for_each_q_vector(vsi, v_idx) {
/* In some cases if DCB is configured the num_[rx|tx]q
* can be less than vsi->num_q_vectors. This check
--- a/drivers/net/ethernet/intel/ice/ice_txrx.h
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.h
@@ -222,7 +222,7 @@ enum ice_rx_dtype {
#define ICE_ITR_GRAN_S 1 /* ITR granularity is always 2us */
#define ICE_ITR_GRAN_US BIT(ICE_ITR_GRAN_S)
#define ICE_ITR_MASK 0x1FFE /* ITR register value alignment mask */
-#define ITR_REG_ALIGN(setting) __ALIGN_MASK(setting, ~ICE_ITR_MASK)
+#define ITR_REG_ALIGN(setting) ((setting) & ICE_ITR_MASK)
#define ICE_ITR_ADAPTIVE_MIN_INC 0x0002
#define ICE_ITR_ADAPTIVE_MIN_USECS 0x0002