From: Eli Cohen <eli@mellanox.com>
Date: Mon, 24 Feb 2020 16:59:54 +0200
Subject: net/mlx5: Eswitch, enable forwarding back to uplink port
Patch-mainline: v5.7-rc1
Git-commit: 613f53fe09a27f928a7d05132e1a74b5136e8f04
References: jsc#SLE-15172

Add dependencny on cap termination_table_raw_traffic to allow non
encapsulated packets received from uplink to be forwarded back to the
received uplink port.

Refactor the conditions into a separate function.

Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c |   59 +++++++++++++++++-------
 include/linux/mlx5/mlx5_ifc.h                   |    3 -
 2 files changed, 45 insertions(+), 17 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -3642,6 +3642,46 @@ static int mlx5_validate_goto_chain(stru
 	return 0;
 }
 
+static int verify_uplink_forwarding(struct mlx5e_priv *priv,
+				    struct mlx5e_tc_flow *flow,
+				    struct net_device *out_dev,
+				    struct netlink_ext_ack *extack)
+{
+	struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
+	struct mlx5_esw_flow_attr *attr = flow->esw_attr;
+	struct mlx5e_rep_priv *rep_priv;
+
+	/* Forwarding non encapsulated traffic between
+	 * uplink ports is allowed only if
+	 * termination_table_raw_traffic cap is set.
+	 *
+	 * Input vport was stored esw_attr->in_rep.
+	 * In LAG case, *priv* is the private data of
+	 * uplink which may be not the input vport.
+	 */
+	rep_priv = mlx5e_rep_to_rep_priv(attr->in_rep);
+
+	if (!(mlx5e_eswitch_uplink_rep(rep_priv->netdev) &&
+	      mlx5e_eswitch_uplink_rep(out_dev)))
+		return 0;
+
+	if (!MLX5_CAP_ESW_FLOWTABLE_FDB(esw->dev,
+					termination_table_raw_traffic)) {
+		NL_SET_ERR_MSG_MOD(extack,
+				   "devices are both uplink, can't offload forwarding");
+			pr_err("devices %s %s are both uplink, can't offload forwarding\n",
+			       priv->netdev->name, out_dev->name);
+			return -EOPNOTSUPP;
+	} else if (out_dev != rep_priv->netdev) {
+		NL_SET_ERR_MSG_MOD(extack,
+				   "devices are not the same uplink, can't offload forwarding");
+		pr_err("devices %s %s are both uplink but not the same, can't offload forwarding\n",
+		       priv->netdev->name, out_dev->name);
+		return -EOPNOTSUPP;
+	}
+	return 0;
+}
+
 static int parse_tc_fdb_actions(struct mlx5e_priv *priv,
 				struct flow_action *flow_action,
 				struct mlx5e_tc_flow *flow,
@@ -3739,7 +3779,6 @@ static int parse_tc_fdb_actions(struct m
 				struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
 				struct net_device *uplink_dev = mlx5_eswitch_uplink_get_proto_dev(esw, REP_ETH);
 				struct net_device *uplink_upper;
-				struct mlx5e_rep_priv *rep_priv;
 
 				if (is_duplicated_output_device(priv->netdev,
 								out_dev,
@@ -3775,21 +3814,9 @@ static int parse_tc_fdb_actions(struct m
 						return err;
 				}
 
-				/* Don't allow forwarding between uplink.
-				 *
-				 * Input vport was stored esw_attr->in_rep.
-				 * In LAG case, *priv* is the private data of
-				 * uplink which may be not the input vport.
-				 */
-				rep_priv = mlx5e_rep_to_rep_priv(attr->in_rep);
-				if (mlx5e_eswitch_uplink_rep(rep_priv->netdev) &&
-				    mlx5e_eswitch_uplink_rep(out_dev)) {
-					NL_SET_ERR_MSG_MOD(extack,
-							   "devices are both uplink, can't offload forwarding");
-					pr_err("devices %s %s are both uplink, can't offload forwarding\n",
-					       priv->netdev->name, out_dev->name);
-					return -EOPNOTSUPP;
-				}
+				err = verify_uplink_forwarding(priv, flow, out_dev, extack);
+				if (err)
+					return err;
 
 				if (!mlx5e_is_valid_eswitch_fwd_dev(priv, out_dev)) {
 					NL_SET_ERR_MSG_MOD(extack,
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -416,7 +416,8 @@ struct mlx5_ifc_flow_table_prop_layout_b
 	u8         termination_table[0x1];
 	u8         reformat_and_fwd_to_table[0x1];
 	u8         reserved_at_1a[0x6];
-	u8         reserved_at_20[0x2];
+	u8         termination_table_raw_traffic[0x1];
+	u8         reserved_at_21[0x1];
 	u8         log_max_ft_size[0x6];
 	u8         log_max_modify_header_context[0x8];
 	u8         max_modify_header_actions[0x8];