From: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Date: Fri, 26 Jul 2019 13:02:14 +0530
Subject: [PATCH] scsi: megaraid_sas: Introduce module parameter for default
queue depth
Git-commit: 9ab089d30bcf09d154c0da78920c13b581d23286
Patch-mainline: v5.4-rc1
References: bsc#1156632,jsc#SLE-10720
This patch provides a module parameter and sysfs interface to select
whether the queue depth for each device should be based on the value
suggested by firmware (the default) or the maximum supported by the
controller (can_queue).
Although we have a sysfs interface per sdev to change the queue depth of
individual scsi devices, this implementation provides a single sysfs entry
per shost to switch between the controller max and the value reported by
firmware. The module parameter can provide an interface for one time grub
settings and provides persistent settings across the boot.
[mkp: tweaked commit desc]
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Hannes Reinecke <hare@suse.com>
---
drivers/scsi/megaraid/megaraid_sas.h | 1 +
drivers/scsi/megaraid/megaraid_sas_base.c | 112 ++++++++++++++++++++++++------
2 files changed, 92 insertions(+), 21 deletions(-)
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index a14e8344822b..a6e788c02ff4 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -2429,6 +2429,7 @@ struct megasas_instance {
u8 adapter_type;
bool consistent_mask_64bit;
bool support_nvme_passthru;
+ bool enable_sdev_max_qd;
u8 task_abort_tmo;
u8 max_reset_tmo;
u8 snapdump_wait_time;
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index b2339d04a700..947da79c0977 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -109,6 +109,10 @@ int event_log_level = MFI_EVT_CLASS_CRITICAL;
module_param(event_log_level, int, 0644);
MODULE_PARM_DESC(event_log_level, "Asynchronous event logging level- range is: -2(CLASS_DEBUG) to 4(CLASS_DEAD), Default: 2(CLASS_CRITICAL)");
+unsigned int enable_sdev_max_qd;
+module_param(enable_sdev_max_qd, int, 0444);
+MODULE_PARM_DESC(enable_sdev_max_qd, "Enable sdev max qd as can_queue. Default: 0");
+
MODULE_LICENSE("GPL");
MODULE_VERSION(MEGASAS_VERSION);
MODULE_AUTHOR("megaraidlinux.pdl@broadcom.com");
@@ -1941,25 +1945,19 @@ megasas_set_nvme_device_properties(struct scsi_device *sdev, u32 max_io_size)
blk_queue_virt_boundary(sdev->request_queue, mr_nvme_pg_size - 1);
}
-
/*
- * megasas_set_static_target_properties -
- * Device property set by driver are static and it is not required to be
- * updated after OCR.
- *
- * set io timeout
- * set device queue depth
- * set nvme device properties. see - megasas_set_nvme_device_properties
+ * megasas_set_fw_assisted_qd -
+ * set device queue depth to can_queue
+ * set device queue depth to fw assisted qd
*
* @sdev: scsi device
* @is_target_prop true, if fw provided target properties.
*/
-static void megasas_set_static_target_properties(struct scsi_device *sdev,
+static void megasas_set_fw_assisted_qd(struct scsi_device *sdev,
bool is_target_prop)
{
u8 interface_type;
u32 device_qd = MEGASAS_DEFAULT_CMD_PER_LUN;
- u32 max_io_size_kb = MR_DEFAULT_NVME_MDTS_KB;
u32 tgt_device_qd;
struct megasas_instance *instance;
struct MR_PRIV_DEVICE *mr_device_priv_data;
@@ -1968,11 +1966,6 @@ static void megasas_set_static_target_properties(struct scsi_device *sdev,
mr_device_priv_data = sdev->hostdata;
interface_type = mr_device_priv_data->interface_type;
- /*
- * The RAID firmware may require extended timeouts.
- */
- blk_queue_rq_timeout(sdev->request_queue, scmd_timeout * HZ);
-
switch (interface_type) {
case SAS_PD:
device_qd = MEGASAS_SAS_QD;
@@ -1990,18 +1983,49 @@ static void megasas_set_static_target_properties(struct scsi_device *sdev,
if (tgt_device_qd &&
(tgt_device_qd <= instance->host->can_queue))
device_qd = tgt_device_qd;
+ }
- /* max_io_size_kb will be set to non zero for
- * nvme based vd and syspd.
- */
+ if (instance->enable_sdev_max_qd && interface_type != UNKNOWN_DRIVE)
+ device_qd = instance->host->can_queue;
+
+ scsi_change_queue_depth(sdev, device_qd);
+}
+
+/*
+ * megasas_set_static_target_properties -
+ * Device property set by driver are static and it is not required to be
+ * updated after OCR.
+ *
+ * set io timeout
+ * set device queue depth
+ * set nvme device properties. see - megasas_set_nvme_device_properties
+ *
+ * @sdev: scsi device
+ * @is_target_prop true, if fw provided target properties.
+ */
+static void megasas_set_static_target_properties(struct scsi_device *sdev,
+ bool is_target_prop)
+{
+ u32 max_io_size_kb = MR_DEFAULT_NVME_MDTS_KB;
+ struct megasas_instance *instance;
+
+ instance = megasas_lookup_instance(sdev->host->host_no);
+
+ /*
+ * The RAID firmware may require extended timeouts.
+ */
+ blk_queue_rq_timeout(sdev->request_queue, scmd_timeout * HZ);
+
+ /* max_io_size_kb will be set to non zero for
+ * nvme based vd and syspd.
+ */
+ if (is_target_prop)
max_io_size_kb = le32_to_cpu(instance->tgt_prop->max_io_size_kb);
- }
if (instance->nvme_page_size && max_io_size_kb)
megasas_set_nvme_device_properties(sdev, (max_io_size_kb << 10));
- scsi_change_queue_depth(sdev, device_qd);
-
+ megasas_set_fw_assisted_qd(sdev, is_target_prop);
}
@@ -3281,6 +3305,48 @@ fw_cmds_outstanding_show(struct device *cdev,
return snprintf(buf, PAGE_SIZE, "%d\n", atomic_read(&instance->fw_outstanding));
}
+static ssize_t
+enable_sdev_max_qd_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct megasas_instance *instance = (struct megasas_instance *)shost->hostdata;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", instance->enable_sdev_max_qd);
+}
+
+static ssize_t
+enable_sdev_max_qd_store(struct device *cdev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct megasas_instance *instance = (struct megasas_instance *)shost->hostdata;
+ u32 val = 0;
+ bool is_target_prop;
+ int ret_target_prop = DCMD_FAILED;
+ struct scsi_device *sdev;
+
+ if (kstrtou32(buf, 0, &val) != 0) {
+ pr_err("megasas: could not set enable_sdev_max_qd\n");
+ return -EINVAL;
+ }
+
+ mutex_lock(&instance->reset_mutex);
+ if (val)
+ instance->enable_sdev_max_qd = true;
+ else
+ instance->enable_sdev_max_qd = false;
+
+ shost_for_each_device(sdev, shost) {
+ ret_target_prop = megasas_get_target_prop(instance, sdev);
+ is_target_prop = (ret_target_prop == DCMD_SUCCESS) ? true : false;
+ megasas_set_fw_assisted_qd(sdev, is_target_prop);
+ }
+ mutex_unlock(&instance->reset_mutex);
+
+ return strlen(buf);
+}
+
static ssize_t
dump_system_regs_show(struct device *cdev,
struct device_attribute *attr, char *buf)
@@ -3310,6 +3376,7 @@ static DEVICE_ATTR_RW(fw_crash_state);
static DEVICE_ATTR_RO(page_size);
static DEVICE_ATTR_RO(ldio_outstanding);
static DEVICE_ATTR_RO(fw_cmds_outstanding);
+static DEVICE_ATTR_RW(enable_sdev_max_qd);
static DEVICE_ATTR_RO(dump_system_regs);
static DEVICE_ATTR_RO(raid_map_id);
@@ -3320,6 +3387,7 @@ static struct device_attribute *megaraid_host_attrs[] = {
&dev_attr_page_size,
&dev_attr_ldio_outstanding,
&dev_attr_fw_cmds_outstanding,
+ &dev_attr_enable_sdev_max_qd,
&dev_attr_dump_system_regs,
&dev_attr_raid_map_id,
NULL,
@@ -5891,6 +5959,8 @@ static int megasas_init_fw(struct megasas_instance *instance)
MR_MAX_RAID_MAP_SIZE_MASK);
}
+ instance->enable_sdev_max_qd = enable_sdev_max_qd;
+
switch (instance->adapter_type) {
case VENTURA_SERIES:
fusion->pcie_bw_limitation = true;
--
2.16.4