From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 21 Oct 2020 12:45:13 +0200
Subject: spi: imx: fix runtime pm support for !CONFIG_PM
Git-commit: 43b6bf406cd0319e522638f97c9086b7beebaeaa
Patch-mainline: v5.10-rc3
References: git-fixes

525c9e5a32bd introduced pm_runtime support for the i.MX SPI driver. With
this pm_runtime is used to bring up the clocks initially. When CONFIG_PM
is disabled the clocks are no longer enabled and the driver doesn't work
anymore. Fix this by enabling the clocks in the probe function and
telling pm_runtime that the device is active using
pm_runtime_set_active().

Fixes: 525c9e5a32bd spi: imx: enable runtime pm support
Tested-by: Christian Eggers <ceggers@arri.de> [tested for !CONFIG_PM only]
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20201021104513.21560-1-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
 drivers/spi/spi-imx.c |   23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1674,15 +1674,18 @@ static int spi_imx_probe(struct platform
 		goto out_master_put;
 	}
 
-	pm_runtime_enable(spi_imx->dev);
+	ret = clk_prepare_enable(spi_imx->clk_per);
+	if (ret)
+		goto out_master_put;
+
+	ret = clk_prepare_enable(spi_imx->clk_ipg);
+	if (ret)
+		goto out_put_per;
+
 	pm_runtime_set_autosuspend_delay(spi_imx->dev, MXC_RPM_TIMEOUT);
 	pm_runtime_use_autosuspend(spi_imx->dev);
-
-	ret = pm_runtime_get_sync(spi_imx->dev);
-	if (ret < 0) {
-		dev_err(spi_imx->dev, "failed to enable clock\n");
-		goto out_runtime_pm_put;
-	}
+	pm_runtime_set_active(spi_imx->dev);
+	pm_runtime_enable(spi_imx->dev);
 
 	spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per);
 	/*
@@ -1722,8 +1725,12 @@ out_bitbang_start:
 		spi_imx_sdma_exit(spi_imx);
 out_runtime_pm_put:
 	pm_runtime_dont_use_autosuspend(spi_imx->dev);
-	pm_runtime_put_sync(spi_imx->dev);
+	pm_runtime_set_suspended(&pdev->dev);
 	pm_runtime_disable(spi_imx->dev);
+
+	clk_disable_unprepare(spi_imx->clk_ipg);
+out_put_per:
+	clk_disable_unprepare(spi_imx->clk_per);
 out_master_put:
 	spi_master_put(master);