From: Bart Van Assche <bvanassche@acm.org>
Date: Mon, 18 May 2020 14:17:07 -0700
Subject: scsi: qla2xxx: Fix the code that reads from mailbox registers
Patch-mainline: v5.8-rc1
Git-commit: 37139da1b097e06841d40a6055db64c78755aea9
References: bsc#1171688 bsc#1174003

Make the MMIO accessors strongly typed such that the compiler checks
whether the accessor function is used that matches the register width. Fix
those MMIO accesses where another number of bits was read or written than
the size of the register.

Link: https://lore.kernel.org/r/20200518211712.11395-11-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 drivers/scsi/qla2xxx/qla_def.h  |   53 +++++++++++++++++++++++++++++++++-------
 drivers/scsi/qla2xxx/qla_init.c |    6 ++--
 drivers/scsi/qla2xxx/qla_iocb.c |    2 -
 drivers/scsi/qla2xxx/qla_isr.c  |    4 +--
 drivers/scsi/qla2xxx/qla_mbx.c  |    2 -
 drivers/scsi/qla2xxx/qla_mr.c   |   26 +++++++++----------
 drivers/scsi/qla2xxx/qla_nx.c   |    4 +--
 drivers/scsi/qla2xxx/qla_os.c   |    2 -
 8 files changed, 67 insertions(+), 32 deletions(-)

--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -128,15 +128,50 @@ static inline uint32_t make_handle(uint1
  * I/O register
 */
 
-#define RD_REG_BYTE(addr)		readb(addr)
-#define RD_REG_WORD(addr)		readw(addr)
-#define RD_REG_DWORD(addr)		readl(addr)
-#define RD_REG_BYTE_RELAXED(addr)	readb_relaxed(addr)
-#define RD_REG_WORD_RELAXED(addr)	readw_relaxed(addr)
-#define RD_REG_DWORD_RELAXED(addr)	readl_relaxed(addr)
-#define WRT_REG_BYTE(addr, data)	writeb(data, addr)
-#define WRT_REG_WORD(addr, data)	writew(data, addr)
-#define WRT_REG_DWORD(addr, data)	writel(data, addr)
+static inline u8 RD_REG_BYTE(const volatile u8 __iomem *addr)
+{
+	return readb(addr);
+}
+
+static inline u16 RD_REG_WORD(const volatile __le16 __iomem *addr)
+{
+	return readw(addr);
+}
+
+static inline u32 RD_REG_DWORD(const volatile __le32 __iomem *addr)
+{
+	return readl(addr);
+}
+
+static inline u8 RD_REG_BYTE_RELAXED(const volatile u8 __iomem *addr)
+{
+	return readb_relaxed(addr);
+}
+
+static inline u16 RD_REG_WORD_RELAXED(const volatile __le16 __iomem *addr)
+{
+	return readw_relaxed(addr);
+}
+
+static inline u32 RD_REG_DWORD_RELAXED(const volatile __le32 __iomem *addr)
+{
+	return readl_relaxed(addr);
+}
+
+static inline void WRT_REG_BYTE(volatile u8 __iomem *addr, u8 data)
+{
+	return writeb(data, addr);
+}
+
+static inline void WRT_REG_WORD(volatile __le16 __iomem *addr, u16 data)
+{
+	return writew(data, addr);
+}
+
+static inline void WRT_REG_DWORD(volatile __le32 __iomem *addr, u32 data)
+{
+	return writel(data, addr);
+}
 
 /*
  * ISP83XX specific remote register addresses
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2221,7 +2221,7 @@ qla2x00_initialize_adapter(scsi_qla_host
 
 	/* Check for secure flash support */
 	if (IS_QLA28XX(ha)) {
-		if (RD_REG_DWORD(&reg->mailbox12) & BIT_0)
+		if (RD_REG_WORD(&reg->mailbox12) & BIT_0)
 			ha->flags.secure_adapter = 1;
 		ql_log(ql_log_info, vha, 0xffff, "Secure Adapter: %s\n",
 		    (ha->flags.secure_adapter) ? "Yes" : "No");
@@ -2782,7 +2782,7 @@ qla24xx_reset_risc(scsi_qla_host_t *vha)
 	ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x017f,
 	    "HCCR: 0x%x, MailBox0 Status 0x%x\n",
 	    RD_REG_DWORD(&reg->hccr),
-	    RD_REG_DWORD(&reg->mailbox0));
+	    RD_REG_WORD(&reg->mailbox0));
 
 	/* Wait for soft-reset to complete. */
 	RD_REG_DWORD(&reg->ctrl_status);
@@ -4096,7 +4096,7 @@ qla24xx_config_rings(struct scsi_qla_hos
 	}
 
 	/* PCI posting */
-	RD_REG_DWORD(&ioreg->hccr);
+	RD_REG_WORD(&ioreg->hccr);
 }
 
 /**
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -2268,7 +2268,7 @@ void *
 		    IS_QLA28XX(ha))
 			cnt = RD_REG_DWORD(&reg->isp25mq.req_q_out);
 		else if (IS_P3P_TYPE(ha))
-			cnt = RD_REG_DWORD(&reg->isp82.req_q_out);
+			cnt = RD_REG_DWORD(reg->isp82.req_q_out);
 		else if (IS_FWI2_CAPABLE(ha))
 			cnt = RD_REG_DWORD(&reg->isp24.req_q_out);
 		else if (IS_QLAFX00(ha))
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -451,7 +451,7 @@ qla81xx_idc_event(scsi_qla_host_t *vha,
 	int rval;
 	struct device_reg_24xx __iomem *reg24 = &vha->hw->iobase->isp24;
 	struct device_reg_82xx __iomem *reg82 = &vha->hw->iobase->isp82;
-	uint16_t __iomem *wptr;
+	__le16 __iomem *wptr;
 	uint16_t cnt, timeout, mb[QLA_IDC_ACK_REGS];
 
 	/* Seed data -- mailbox1 -> mailbox7. */
@@ -3163,7 +3163,7 @@ qla24xx_mbx_completion(scsi_qla_host_t *
 {
 	uint16_t	cnt;
 	uint32_t	mboxes;
-	uint16_t __iomem *wptr;
+	__le16 __iomem *wptr;
 	struct qla_hw_data *ha = vha->hw;
 	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -106,7 +106,7 @@ qla2x00_mailbox_command(scsi_qla_host_t
 	uint8_t		io_lock_on;
 	uint16_t	command = 0;
 	uint16_t	*iptr;
-	uint16_t __iomem *optr;
+	__le16 __iomem  *optr;
 	uint32_t	cnt;
 	uint32_t	mboxes;
 	unsigned long	wait_time;
--- a/drivers/scsi/qla2xxx/qla_mr.c
+++ b/drivers/scsi/qla2xxx/qla_mr.c
@@ -46,7 +46,7 @@ qlafx00_mailbox_command(scsi_qla_host_t
 	uint8_t		io_lock_on;
 	uint16_t	command = 0;
 	uint32_t	*iptr;
-	uint32_t __iomem *optr;
+	__le32 __iomem *optr;
 	uint32_t	cnt;
 	uint32_t	mboxes;
 	unsigned long	wait_time;
@@ -109,7 +109,7 @@ qlafx00_mailbox_command(scsi_qla_host_t
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 
 	/* Load mailbox registers. */
-	optr = (uint32_t __iomem *)&reg->ispfx00.mailbox0;
+	optr = &reg->ispfx00.mailbox0;
 
 	iptr = mcp->mb;
 	command = mcp->mb[0];
@@ -2843,13 +2843,13 @@ qlafx00_async_event(scsi_qla_host_t *vha
 		break;
 
 	default:
-		ha->aenmb[1] = RD_REG_WORD(&reg->aenmailbox1);
-		ha->aenmb[2] = RD_REG_WORD(&reg->aenmailbox2);
-		ha->aenmb[3] = RD_REG_WORD(&reg->aenmailbox3);
-		ha->aenmb[4] = RD_REG_WORD(&reg->aenmailbox4);
-		ha->aenmb[5] = RD_REG_WORD(&reg->aenmailbox5);
-		ha->aenmb[6] = RD_REG_WORD(&reg->aenmailbox6);
-		ha->aenmb[7] = RD_REG_WORD(&reg->aenmailbox7);
+		ha->aenmb[1] = RD_REG_DWORD(&reg->aenmailbox1);
+		ha->aenmb[2] = RD_REG_DWORD(&reg->aenmailbox2);
+		ha->aenmb[3] = RD_REG_DWORD(&reg->aenmailbox3);
+		ha->aenmb[4] = RD_REG_DWORD(&reg->aenmailbox4);
+		ha->aenmb[5] = RD_REG_DWORD(&reg->aenmailbox5);
+		ha->aenmb[6] = RD_REG_DWORD(&reg->aenmailbox6);
+		ha->aenmb[7] = RD_REG_DWORD(&reg->aenmailbox7);
 		ql_dbg(ql_dbg_async, vha, 0x5078,
 		    "AEN:%04x %04x %04x %04x :%04x %04x %04x %04x\n",
 		    ha->aenmb[0], ha->aenmb[1], ha->aenmb[2], ha->aenmb[3],
@@ -2869,7 +2869,7 @@ static void
 qlafx00_mbx_completion(scsi_qla_host_t *vha, uint32_t mb0)
 {
 	uint16_t	cnt;
-	uint32_t __iomem *wptr;
+	__le32 __iomem *wptr;
 	struct qla_hw_data *ha = vha->hw;
 	struct device_reg_fx00 __iomem *reg = &ha->iobase->ispfx00;
 
@@ -2879,7 +2879,7 @@ qlafx00_mbx_completion(scsi_qla_host_t *
 	/* Load return mailbox registers. */
 	ha->flags.mbox_int = 1;
 	ha->mailbox_out32[0] = mb0;
-	wptr = (uint32_t __iomem *)&reg->mailbox17;
+	wptr = &reg->mailbox17;
 
 	for (cnt = 1; cnt < ha->mbx_count; cnt++) {
 		ha->mailbox_out32[cnt] = RD_REG_DWORD(wptr);
@@ -2936,13 +2936,13 @@ qlafx00_intr_handler(int irq, void *dev_
 			break;
 
 		if (stat & QLAFX00_INTR_MB_CMPLT) {
-			mb[0] = RD_REG_WORD(&reg->mailbox16);
+			mb[0] = RD_REG_DWORD(&reg->mailbox16);
 			qlafx00_mbx_completion(vha, mb[0]);
 			status |= MBX_INTERRUPT;
 			clr_intr |= QLAFX00_INTR_MB_CMPLT;
 		}
 		if (intr_stat & QLAFX00_INTR_ASYNC_CMPLT) {
-			ha->aenmb[0] = RD_REG_WORD(&reg->aenmailbox0);
+			ha->aenmb[0] = RD_REG_DWORD(&reg->aenmailbox0);
 			qlafx00_async_event(vha);
 			clr_intr |= QLAFX00_INTR_ASYNC_CMPLT;
 		}
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -1996,11 +1996,11 @@ void
 qla82xx_mbx_completion(scsi_qla_host_t *vha, uint16_t mb0)
 {
 	uint16_t	cnt;
-	uint16_t __iomem *wptr;
+	__le16 __iomem *wptr;
 	struct qla_hw_data *ha = vha->hw;
 	struct device_reg_82xx __iomem *reg = &ha->iobase->isp82;
 
-	wptr = (uint16_t __iomem *)&reg->mailbox_out[1];
+	wptr = &reg->mailbox_out[1];
 
 	/* Load return mailbox registers. */
 	ha->flags.mbox_int = 1;
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -7569,7 +7569,7 @@ qla2xxx_pci_mmio_enabled(struct pci_dev
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 	if (IS_QLA2100(ha) || IS_QLA2200(ha)){
-		stat = RD_REG_DWORD(&reg->hccr);
+		stat = RD_REG_WORD(&reg->hccr);
 		if (stat & HCCR_RISC_PAUSE)
 			risc_paused = 1;
 	} else if (IS_QLA23XX(ha)) {