From: Enzo Matsumiya <ematsumiya@suse.de>
Date: Wed, 5 Aug 2020 17:05:46 -0300
Subject: scsi: qla2xxx: Use MBX_TOV_SECONDS for mailbox command timeout values
Patch-mainline: v5.9-rc2
Git-commit: c314a014b1802d30f1dc50db18b2e7f5a77d19c6
References: bsc#1171688 bsc#1174003

Improves readability of qla_mbx.c.

Link: https://lore.kernel.org/r/20200805200546.22497-1-ematsumiya@suse.de
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Daniel Wagner <dwagner@suse.de>
---
 drivers/scsi/qla2xxx/qla_mbx.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -5240,7 +5240,7 @@ qla2x00_read_ram_word(scsi_qla_host_t *v
 	mcp->mb[8] = MSW(risc_addr);
 	mcp->out_mb = MBX_8|MBX_1|MBX_0;
 	mcp->in_mb = MBX_3|MBX_2|MBX_0;
-	mcp->tov = 30;
+	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
 	if (rval != QLA_SUCCESS) {
@@ -5428,7 +5428,7 @@ qla2x00_write_ram_word(scsi_qla_host_t *
 	mcp->mb[8] = MSW(risc_addr);
 	mcp->out_mb = MBX_8|MBX_3|MBX_2|MBX_1|MBX_0;
 	mcp->in_mb = MBX_1|MBX_0;
-	mcp->tov = 30;
+	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
 	if (rval != QLA_SUCCESS) {
@@ -5700,7 +5700,7 @@ qla24xx_set_fcp_prio(scsi_qla_host_t *vh
 	mcp->mb[9] = vha->vp_idx;
 	mcp->out_mb = MBX_9|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
 	mcp->in_mb = MBX_4|MBX_3|MBX_1|MBX_0;
-	mcp->tov = 30;
+	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
 	if (mb != NULL) {
@@ -5787,7 +5787,7 @@ qla82xx_mbx_intr_enable(scsi_qla_host_t
 
 	mcp->out_mb = MBX_1|MBX_0;
 	mcp->in_mb = MBX_0;
-	mcp->tov = 30;
+	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 
 	rval = qla2x00_mailbox_command(vha, mcp);
@@ -5822,7 +5822,7 @@ qla82xx_mbx_intr_disable(scsi_qla_host_t
 
 	mcp->out_mb = MBX_1|MBX_0;
 	mcp->in_mb = MBX_0;
-	mcp->tov = 30;
+	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 
 	rval = qla2x00_mailbox_command(vha, mcp);
@@ -6014,7 +6014,7 @@ qla81xx_set_led_config(scsi_qla_host_t *
 	if (IS_QLA8031(ha))
 		mcp->out_mb |= MBX_6|MBX_5|MBX_4|MBX_3;
 	mcp->in_mb = MBX_0;
-	mcp->tov = 30;
+	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 
 	rval = qla2x00_mailbox_command(vha, mcp);
@@ -6050,7 +6050,7 @@ qla81xx_get_led_config(scsi_qla_host_t *
 	mcp->in_mb = MBX_2|MBX_1|MBX_0;
 	if (IS_QLA8031(ha))
 		mcp->in_mb |= MBX_6|MBX_5|MBX_4|MBX_3;
-	mcp->tov = 30;
+	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 
 	rval = qla2x00_mailbox_command(vha, mcp);