From: Paul Burton <paul.burton@imgtec.com>
Date: Tue, 15 Aug 2017 16:24:38 -0500
Subject: PCI: altera: Use size=4 IRQ domain for legacy INTx
Git-commit: bfdbbf0e3c2a6e3fe752e0dc858c982aa1ccecad
Patch-mainline: v4.14-rc1
References: fate#326572
The devicetree binding documentation for the Altera PCIe controller shows
an example which uses an interrupt-map property to map PCI INTx interrupts
to hardware IRQ numbers 1-4. The driver creates an IRQ domain with size 5
in order to cover this range, with hwirq=0 left unused.
This patch cleans up this wasted IRQ domain entry, modifying the driver to
use an IRQ domain of size 4 which matches the actual number of PCI INTx
interrupts. Since the hwirq numbers 1-4 are part of the devicetree binding,
and this is considered ABI, we cannot simply change the interrupt-map
property to use the range 0-3. Instead we make use of the
pci_irqd_intx_xlate() helper function to translate the range 1-4 used at
the DT level into the range 0-3 which is now used within the driver, and
stop adding 1 to decoded hwirq numbers in altera_pcie_isr().
Whilst cleaning up INTx handling we make use of the new PCI_NUM_INTX macro
& drop the custom INTX_NUM definition.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com>
---
drivers/pci/host/pcie-altera.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/pci/host/pcie-altera.c b/drivers/pci/host/pcie-altera.c
index 4ea4f8f5dc77..6fced590eb87 100644
--- a/drivers/pci/host/pcie-altera.c
+++ b/drivers/pci/host/pcie-altera.c
@@ -76,8 +76,6 @@
#define LINK_UP_TIMEOUT HZ
#define LINK_RETRAIN_TIMEOUT HZ
-#define INTX_NUM 4
-
#define DWORD_MASK 3
struct altera_pcie {
@@ -464,6 +462,7 @@ static int altera_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
static const struct irq_domain_ops intx_domain_ops = {
.map = altera_pcie_intx_map,
+ .xlate = pci_irqd_intx_xlate,
};
static void altera_pcie_isr(struct irq_desc *desc)
@@ -481,11 +480,11 @@ static void altera_pcie_isr(struct irq_desc *desc)
while ((status = cra_readl(pcie, P2A_INT_STATUS)
& P2A_INT_STS_ALL) != 0) {
- for_each_set_bit(bit, &status, INTX_NUM) {
+ for_each_set_bit(bit, &status, PCI_NUM_INTX) {
/* clear interrupts */
cra_writel(pcie, 1 << bit, P2A_INT_STATUS);
- virq = irq_find_mapping(pcie->irq_domain, bit + 1);
+ virq = irq_find_mapping(pcie->irq_domain, bit);
if (virq)
generic_handle_irq(virq);
else
@@ -536,7 +535,7 @@ static int altera_pcie_init_irq_domain(struct altera_pcie *pcie)
struct device_node *node = dev->of_node;
/* Setup INTx */
- pcie->irq_domain = irq_domain_add_linear(node, INTX_NUM + 1,
+ pcie->irq_domain = irq_domain_add_linear(node, PCI_NUM_INTX,
&intx_domain_ops, pcie);
if (!pcie->irq_domain) {
dev_err(dev, "Failed to get a INTx IRQ domain\n");
--
2.11.0