From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Tue, 17 Oct 2017 11:06:14 +0200
Subject: drm/sun4i: tcon: Move out the tcon0 common setup
Git-commit: ba19c53704d8bc503dd20011819d1d3251899c56
Patch-mainline: v4.15-rc1
References: FATE#326289 FATE#326079 FATE#326049 FATE#322398 FATE#326166
Some channel0 setup has to be done, no matter what the output interface is
(RGB, CPU, LVDS). Move that code into a common function in order to avoid
duplication.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/183100/
Acked-by: Petr Tesarik <ptesarik@suse.com>
---
drivers/gpu/drm/sun4i/sun4i_tcon.c | 26 ++++++++++++++++----------
1 file changed, 16 insertions(+), 10 deletions(-)
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -158,15 +158,26 @@ static int sun4i_tcon_get_clk_delay(cons
return delay;
}
-static void sun4i_tcon0_mode_set(struct sun4i_tcon *tcon,
- const struct drm_display_mode *mode)
+static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon,
+ const struct drm_display_mode *mode)
+{
+ /* Configure the dot clock */
+ clk_set_rate(tcon->dclk, mode->crtc_clock * 1000);
+
+ /* Set the resolution */
+ regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
+ SUN4I_TCON0_BASIC0_X(mode->crtc_hdisplay) |
+ SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
+}
+
+static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
+ const struct drm_display_mode *mode)
{
unsigned int bp, hsync, vsync;
u8 clk_delay;
u32 val = 0;
- /* Configure the dot clock */
- clk_set_rate(tcon->dclk, mode->crtc_clock * 1000);
+ sun4i_tcon0_mode_set_common(tcon, mode);
/* Adjust clock delay */
clk_delay = sun4i_tcon_get_clk_delay(mode, 0);
@@ -174,11 +185,6 @@ static void sun4i_tcon0_mode_set(struct
SUN4I_TCON0_CTL_CLK_DELAY_MASK,
SUN4I_TCON0_CTL_CLK_DELAY(clk_delay));
- /* Set the resolution */
- regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
- SUN4I_TCON0_BASIC0_X(mode->crtc_hdisplay) |
- SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
-
/*
* This is called a backporch in the register documentation,
* but it really is the back porch + hsync
@@ -329,7 +335,7 @@ void sun4i_tcon_mode_set(struct sun4i_tc
{
switch (encoder->encoder_type) {
case DRM_MODE_ENCODER_NONE:
- sun4i_tcon0_mode_set(tcon, mode);
+ sun4i_tcon0_mode_set_rgb(tcon, mode);
sun4i_tcon_set_mux(tcon, 0, encoder);
break;
case DRM_MODE_ENCODER_TVDAC: