From: Jernej Skrabec <jernej.skrabec@siol.net>
Date: Mon, 25 Jun 2018 14:02:57 +0200
Subject: drm/sun4i: Don't change clock bits in DW HDMI PHY driver
Git-commit: 09f380e3ba4103a32faf4fad35d90dc144578214
Patch-mainline: v4.19-rc1
References: FATE#326289 FATE#326079 FATE#326049 FATE#322398 FATE#326166
DW HDMI PHY driver and PHY clock driver share same registers. Make sure
that DW HDMI PHY setup code doesn't change any clock related bits.
During initialization, set PHY PLL parent bit to 0.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-18-jernej.skrabec@siol.net
Acked-by: Petr Tesarik <ptesarik@suse.com>
---
drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 2 +-
drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 12 +++++++++++-
2 files changed, 12 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
@@ -98,7 +98,7 @@
#define SUN8I_HDMI_PHY_PLL_CFG1_LDO2_EN BIT(29)
#define SUN8I_HDMI_PHY_PLL_CFG1_LDO1_EN BIT(28)
#define SUN8I_HDMI_PHY_PLL_CFG1_HV_IS_33 BIT(27)
-#define SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL BIT(26)
+#define SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL_MSK BIT(26)
#define SUN8I_HDMI_PHY_PLL_CFG1_PLLEN BIT(25)
#define SUN8I_HDMI_PHY_PLL_CFG1_LDO_VSET(x) ((x) << 22)
#define SUN8I_HDMI_PHY_PLL_CFG1_UNKNOWN(x) ((x) << 20)
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -183,7 +183,13 @@ static int sun8i_hdmi_phy_config_h3(stru
regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
SUN8I_HDMI_PHY_ANA_CFG1_TXEN_MASK, 0);
- regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG, pll_cfg1_init);
+ /*
+ * NOTE: We have to be careful not to overwrite PHY parent
+ * clock selection bit and clock divider.
+ */
+ regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG,
+ (u32)~SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL_MSK,
+ pll_cfg1_init);
regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG2_REG,
(u32)~SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_MSK,
pll_cfg2_init);
@@ -352,6 +358,10 @@ static void sun8i_hdmi_phy_init_h3(struc
SUN8I_HDMI_PHY_ANA_CFG3_SCLEN |
SUN8I_HDMI_PHY_ANA_CFG3_SDAEN);
+ /* reset PHY PLL clock parent */
+ regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG,
+ SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL_MSK, 0);
+
/* set HW control of CEC pins */
regmap_write(phy->regs, SUN8I_HDMI_PHY_CEC_REG, 0);