From: Tom St Denis <tom.stdenis@amd.com>
Date: Wed, 20 Jun 2018 07:55:39 -0400
Subject: drm/amd/amdgpu: Add a GPU_LOAD entry to sysfs (v3)
Git-commit: b374d82dca4721c534eb940b599dd4d45ba3a18f
Patch-mainline: v4.19-rc1
References: FATE#326289 FATE#326079 FATE#326049 FATE#322398 FATE#326166

This adds what should be a stable interface to read GPU
load from userspace.

(v2): Fix comments and name of file per recommendations.
(v3): Add chapter to amdgpu.rst as well.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Slava Abramov <slava.abramov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Petr Tesarik <ptesarik@suse.com>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c |   40 +++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
@@ -903,6 +903,36 @@ fail:
 	return -EINVAL;
 }
 
+/**
+ * DOC: busy_percent
+ *
+ * The amdgpu driver provides a sysfs API for reading how busy the GPU
+ * is as a percentage.  The file gpu_busy_percent is used for this.
+ * The SMU firmware computes a percentage of load based on the
+ * aggregate activity level in the IP cores.
+ */
+static ssize_t amdgpu_get_busy_percent(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct drm_device *ddev = dev_get_drvdata(dev);
+	struct amdgpu_device *adev = ddev->dev_private;
+	int r, value, size = sizeof(value);
+
+	/* sanity check PP is enabled */
+	if (!(adev->powerplay.pp_funcs &&
+	      adev->powerplay.pp_funcs->read_sensor))
+		return -EINVAL;
+
+	/* read the IP busy sensor */
+	r = amdgpu_dpm_read_sensor(adev, AMDGPU_PP_SENSOR_GPU_LOAD,
+				   (void *)&value, &size);
+	if (r)
+		return r;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", value);
+}
+
 static DEVICE_ATTR(power_dpm_state, S_IRUGO | S_IWUSR, amdgpu_get_dpm_state, amdgpu_set_dpm_state);
 static DEVICE_ATTR(power_dpm_force_performance_level, S_IRUGO | S_IWUSR,
 		   amdgpu_get_dpm_forced_performance_level,
@@ -936,6 +966,8 @@ static DEVICE_ATTR(pp_power_profile_mode
 static DEVICE_ATTR(pp_od_clk_voltage, S_IRUGO | S_IWUSR,
 		amdgpu_get_pp_od_clk_voltage,
 		amdgpu_set_pp_od_clk_voltage);
+static DEVICE_ATTR(gpu_busy_percent, S_IRUGO,
+		amdgpu_get_busy_percent, NULL);
 
 static ssize_t amdgpu_hwmon_show_temp(struct device *dev,
 				      struct device_attribute *attr,
@@ -1823,6 +1855,13 @@ int amdgpu_pm_sysfs_init(struct amdgpu_d
 				"pp_od_clk_voltage\n");
 		return ret;
 	}
+	ret = device_create_file(adev->dev,
+			&dev_attr_gpu_busy_percent);
+	if (ret) {
+		DRM_ERROR("failed to create device file	"
+				"gpu_busy_level\n");
+		return ret;
+	}
 	ret = amdgpu_debugfs_pm_init(adev);
 	if (ret) {
 		DRM_ERROR("Failed to register debugfs file for dpm!\n");
@@ -1858,6 +1897,7 @@ void amdgpu_pm_sysfs_fini(struct amdgpu_
 			&dev_attr_pp_power_profile_mode);
 	device_remove_file(adev->dev,
 			&dev_attr_pp_od_clk_voltage);
+	device_remove_file(adev->dev, &dev_attr_gpu_busy_percent);
 }
 
 void amdgpu_pm_compute_clocks(struct amdgpu_device *adev)