From d98422cb6619408f1779457fefc5da983fc6bc3b Mon Sep 17 00:00:00 2001
From: Derek Robson <robsonde@gmail.com>
Date: Sat, 22 Jul 2017 13:47:07 +1200
Subject: [PATCH] Bluetooth: Style fix - align block comments
Git-commit: d98422cb6619408f1779457fefc5da983fc6bc3b
Patch-mainline: v4.14-rc1
References: FATE#326294
Fixed alignment of all block comments.
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
---
drivers/bluetooth/ath3k.c | 3 ++-
drivers/bluetooth/bt3c_cs.c | 8 +++++---
drivers/bluetooth/btmrvl_sdio.c | 6 ++++--
drivers/bluetooth/btsdio.c | 3 ++-
drivers/bluetooth/btuart_cs.c | 8 +++++---
drivers/bluetooth/btusb.c | 12 ++++++++----
drivers/bluetooth/btwilink.c | 6 +++---
drivers/bluetooth/hci_ldisc.c | 3 ++-
drivers/bluetooth/hci_ll.c | 3 ++-
9 files changed, 33 insertions(+), 19 deletions(-)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -140,7 +140,8 @@ MODULE_DEVICE_TABLE(usb, ath3k_table);
#define BTUSB_ATH3012 0x80
/* This table is to load patch and sysconfig files
- * for AR3012 */
+ * for AR3012
+ */
static const struct usb_device_id ath3k_blist_tbl[] = {
/* Atheros AR3012 with sflash firmware*/
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -684,14 +684,16 @@ static int bt3c_config(struct pcmcia_dev
unsigned long try;
/* First pass: look for a config entry that looks normal.
- Two tries: without IO aliases, then with aliases */
+ * Two tries: without IO aliases, then with aliases
+ */
for (try = 0; try < 2; try++)
if (!pcmcia_loop_config(link, bt3c_check_config, (void *) try))
goto found_port;
/* Second pass: try to find an entry that isn't picky about
- its base address, then try to grab any standard serial port
- address, and finally try to get any free port. */
+ * its base address, then try to grab any standard serial port
+ * address, and finally try to get any free port.
+ */
if (!pcmcia_loop_config(link, bt3c_check_config_notpicky, NULL))
goto found_port;
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -1455,7 +1455,8 @@ done:
fw_dump_ptr = fw_dump_data;
/* Dump all the memory data into single file, a userspace script will
- be used to split all the memory data to multiple files*/
+ * be used to split all the memory data to multiple files
+ */
BT_INFO("== btmrvl firmware dump to /sys/class/devcoredump start");
for (idx = 0; idx < dump_num; idx++) {
struct memory_type_mapping *entry = &mem_type_mapping_tbl[idx];
@@ -1482,7 +1483,8 @@ done:
}
/* fw_dump_data will be free in device coredump release function
- after 5 min*/
+ * after 5 min
+ */
dev_coredumpv(&card->func->dev, fw_dump_data, fw_dump_len, GFP_KERNEL);
BT_INFO("== btmrvl firmware dump to /sys/class/devcoredump end");
}
--- a/drivers/bluetooth/btsdio.c
+++ b/drivers/bluetooth/btsdio.c
@@ -145,7 +145,8 @@ static int btsdio_rx_packet(struct btsdi
if (!skb) {
/* Out of memory. Prepare a read retry and just
* return with the expectation that the next time
- * we're called we'll have more memory. */
+ * we're called we'll have more memory.
+ */
return -ENOMEM;
}
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -614,14 +614,16 @@ static int btuart_config(struct pcmcia_d
int try;
/* First pass: look for a config entry that looks normal.
- Two tries: without IO aliases, then with aliases */
+ * Two tries: without IO aliases, then with aliases
+ */
for (try = 0; try < 2; try++)
if (!pcmcia_loop_config(link, btuart_check_config, &try))
goto found_port;
/* Second pass: try to find an entry that isn't picky about
- its base address, then try to grab any standard serial port
- address, and finally try to get any free port. */
+ * its base address, then try to grab any standard serial port
+ * address, and finally try to get any free port.
+ */
if (!pcmcia_loop_config(link, btuart_check_config_notpicky, NULL))
goto found_port;
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -696,7 +696,8 @@ static void btusb_intr_complete(struct u
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
/* -EPERM: urb is being killed;
- * -ENODEV: device got disconnected */
+ * -ENODEV: device got disconnected
+ */
if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
@@ -785,7 +786,8 @@ static void btusb_bulk_complete(struct u
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
/* -EPERM: urb is being killed;
- * -ENODEV: device got disconnected */
+ * -ENODEV: device got disconnected
+ */
if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
@@ -880,7 +882,8 @@ static void btusb_isoc_complete(struct u
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
/* -EPERM: urb is being killed;
- * -ENODEV: device got disconnected */
+ * -ENODEV: device got disconnected
+ */
if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
@@ -992,7 +995,8 @@ static void btusb_diag_complete(struct u
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
/* -EPERM: urb is being killed;
- * -ENODEV: device got disconnected */
+ * -ENODEV: device got disconnected
+ */
if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
--- a/drivers/bluetooth/btwilink.c
+++ b/drivers/bluetooth/btwilink.c
@@ -93,8 +93,7 @@ static void st_reg_completion_cb(void *p
complete(&lhst->wait_reg_completion);
}
-/* Called by Shared Transport layer when receive data is
- * available */
+/* Called by Shared Transport layer when receive data is available */
static long st_receive(void *priv_data, struct sk_buff *skb)
{
struct ti_st *lhst = priv_data;
@@ -198,7 +197,8 @@ static int ti_st_open(struct hci_dev *hd
}
/* Is ST registration callback
- * called with ERROR status? */
+ * called with ERROR status?
+ */
if (hst->reg_status != 0) {
BT_ERR("ST registration completed with invalid "
"status %d", hst->reg_status);
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -464,7 +464,8 @@ static int hci_uart_tty_open(struct tty_
BT_DBG("tty %p", tty);
/* Error if the tty has no write op instead of leaving an exploitable
- hole */
+ * hole
+ */
if (tty->ops->write == NULL)
return -EOPNOTSUPP;
--- a/drivers/bluetooth/hci_ll.c
+++ b/drivers/bluetooth/hci_ll.c
@@ -622,7 +622,8 @@ static int download_firmware(struct ll_d
cmd = (struct hci_command *)action_ptr;
if (cmd->opcode == 0xff36) {
/* ignore remote change
- * baud rate HCI VS command */
+ * baud rate HCI VS command
+ */
bt_dev_warn(lldev->hu.hdev, "change remote baud rate command in firmware");
break;
}