From: Daniel Borkmann <daniel@iogearbox.net>
Date: Thu, 22 Feb 2018 15:12:53 +0100
Subject: bpf, x64: implement retpoline for tail call
Patch-mainline: v4.16-rc3
Git-commit: a493a87f38cfa48caaa95c9347be2d914c6fdf29
References: bsc#1068032 CVE-2017-5715
Implement a retpoline [0] for the BPF tail call JIT'ing that converts
the indirect jump via jmp %rax that is used to make the long jump into
another JITed BPF image. Since this is subject to speculative execution,
we need to control the transient instruction sequence here as well
when CONFIG_RETPOLINE is set, and direct it into a pause + lfence loop.
The latter aligns also with what gcc / clang emits (e.g. [1]).
JIT dump after patch:
# bpftool p d x i 1
0: (18) r2 = map[id:1]
2: (b7) r3 = 0
3: (85) call bpf_tail_call#12
4: (b7) r0 = 2
5: (95) exit
With CONFIG_RETPOLINE:
# bpftool p d j i 1
[...]
33: cmp %edx,0x24(%rsi)
36: jbe 0x0000000000000072 |*
38: mov 0x24(%rbp),%eax
3e: cmp $0x20,%eax
41: ja 0x0000000000000072 |
43: add $0x1,%eax
46: mov %eax,0x24(%rbp)
4c: mov 0x90(%rsi,%rdx,8),%rax
54: test %rax,%rax
57: je 0x0000000000000072 |
59: mov 0x28(%rax),%rax
5d: add $0x25,%rax
61: callq 0x000000000000006d |+
66: pause |
68: lfence |
6b: jmp 0x0000000000000066 |
6d: mov %rax,(%rsp) |
71: retq |
72: mov $0x2,%eax
[...]
* relative fall-through jumps in error case
+ retpoline for indirect jump
Without CONFIG_RETPOLINE:
# bpftool p d j i 1
[...]
33: cmp %edx,0x24(%rsi)
36: jbe 0x0000000000000063 |*
38: mov 0x24(%rbp),%eax
3e: cmp $0x20,%eax
41: ja 0x0000000000000063 |
43: add $0x1,%eax
46: mov %eax,0x24(%rbp)
4c: mov 0x90(%rsi,%rdx,8),%rax
54: test %rax,%rax
57: je 0x0000000000000063 |
59: mov 0x28(%rax),%rax
5d: add $0x25,%rax
61: jmpq *%rax |-
63: mov $0x2,%eax
[...]
* relative fall-through jumps in error case
- plain indirect jump as before
[0] https://support.google.com/faqs/answer/7625886
[1] https://github.com/gcc-mirror/gcc/commit/a31e654fa107be968b802786d747e962c2fcdb2b
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Gary Lin <glin@suse.com>
---
arch/x86/include/asm/nospec-branch.h | 37 +++++++++++++++++++++++++++++++++++
arch/x86/net/bpf_jit_comp.c | 9 ++++----
2 files changed, 42 insertions(+), 4 deletions(-)
--- a/arch/x86/include/asm/nospec-branch.h
+++ b/arch/x86/include/asm/nospec-branch.h
@@ -233,4 +233,41 @@ static inline void indirect_branch_predi
}
#endif /* __ASSEMBLY__ */
+
+/*
+ * Below is used in the eBPF JIT compiler and emits the byte sequence
+ * for the following assembly:
+ *
+ * With retpolines configured:
+ *
+ * callq do_rop
+ * spec_trap:
+ * pause
+ * lfence
+ * jmp spec_trap
+ * do_rop:
+ * mov %rax,(%rsp)
+ * retq
+ *
+ * Without retpolines configured:
+ *
+ * jmp *%rax
+ */
+#ifdef CONFIG_RETPOLINE
+# define RETPOLINE_RAX_BPF_JIT_SIZE 17
+# define RETPOLINE_RAX_BPF_JIT() \
+ EMIT1_off32(0xE8, 7); /* callq do_rop */ \
+ /* spec_trap: */ \
+ EMIT2(0xF3, 0x90); /* pause */ \
+ EMIT3(0x0F, 0xAE, 0xE8); /* lfence */ \
+ EMIT2(0xEB, 0xF9); /* jmp spec_trap */ \
+ /* do_rop: */ \
+ EMIT4(0x48, 0x89, 0x04, 0x24); /* mov %rax,(%rsp) */ \
+ EMIT1(0xC3); /* retq */
+#else
+# define RETPOLINE_RAX_BPF_JIT_SIZE 2
+# define RETPOLINE_RAX_BPF_JIT() \
+ EMIT2(0xFF, 0xE0); /* jmp *%rax */
+#endif
+
#endif /* __NOSPEC_BRANCH_H__ */
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -13,6 +13,7 @@
#include <linux/if_vlan.h>
#include <asm/cacheflush.h>
#include <asm/set_memory.h>
+#include <asm/nospec-branch.h>
#include <linux/bpf.h>
/*
@@ -285,7 +286,7 @@ static void emit_bpf_tail_call(u8 **ppro
EMIT2(0x89, 0xD2); /* mov edx, edx */
EMIT3(0x39, 0x56, /* cmp dword ptr [rsi + 16], edx */
offsetof(struct bpf_array, map.max_entries));
-#define OFFSET1 43 /* number of bytes to jump */
+#define OFFSET1 (41 + RETPOLINE_RAX_BPF_JIT_SIZE) /* number of bytes to jump */
EMIT2(X86_JBE, OFFSET1); /* jbe out */
label1 = cnt;
@@ -294,7 +295,7 @@ static void emit_bpf_tail_call(u8 **ppro
*/
EMIT2_off32(0x8B, 0x85, 36); /* mov eax, dword ptr [rbp + 36] */
EMIT3(0x83, 0xF8, MAX_TAIL_CALL_CNT); /* cmp eax, MAX_TAIL_CALL_CNT */
-#define OFFSET2 32
+#define OFFSET2 (30 + RETPOLINE_RAX_BPF_JIT_SIZE)
EMIT2(X86_JA, OFFSET2); /* ja out */
label2 = cnt;
EMIT3(0x83, 0xC0, 0x01); /* add eax, 1 */
@@ -308,7 +309,7 @@ static void emit_bpf_tail_call(u8 **ppro
* goto out;
*/
EMIT3(0x48, 0x85, 0xC0); /* test rax,rax */
-#define OFFSET3 10
+#define OFFSET3 (8 + RETPOLINE_RAX_BPF_JIT_SIZE)
EMIT2(X86_JE, OFFSET3); /* je out */
label3 = cnt;
@@ -321,7 +322,7 @@ static void emit_bpf_tail_call(u8 **ppro
* rdi == ctx (1st arg)
* rax == prog->bpf_func + prologue_size
*/
- EMIT2(0xFF, 0xE0); /* jmp rax */
+ RETPOLINE_RAX_BPF_JIT();
/* out: */
BUILD_BUG_ON(cnt - label1 != OFFSET1);