From 0d34dfbf3023cf119b83f6470692c0b10c832495 Mon Sep 17 00:00:00 2001
From: JC Kuo <jckuo@nvidia.com>
Date: Wed, 12 Jun 2019 11:14:34 +0800
Subject: [PATCH] clk: tegra210: fix PLLU and PLLU_OUT1
Git-commit: 0d34dfbf3023cf119b83f6470692c0b10c832495
Patch-mainline: 5.3-rc1
References: bsc#1051510
Full-speed and low-speed USB devices do not work with Tegra210
platforms because of incorrect PLLU/PLLU_OUT1 clock settings.
When full-speed device is connected:
[ 14.059886] usb 1-3: new full-speed USB device number 2 using tegra-xusb
[ 14.196295] usb 1-3: device descriptor read/64, error -71
[ 14.436311] usb 1-3: device descriptor read/64, error -71
[ 14.675749] usb 1-3: new full-speed USB device number 3 using tegra-xusb
[ 14.812335] usb 1-3: device descriptor read/64, error -71
[ 15.052316] usb 1-3: device descriptor read/64, error -71
[ 15.164799] usb usb1-port3: attempt power cycle
When low-speed device is connected:
[ 37.610949] usb usb1-port3: Cannot enable. Maybe the USB cable is bad?
[ 38.557376] usb usb1-port3: Cannot enable. Maybe the USB cable is bad?
[ 38.564977] usb usb1-port3: attempt power cycle
This commit fixes the issue by:
1. initializing PLLU_OUT1 before initializing XUSB_FS_SRC clock
because PLLU_OUT1 is parent of XUSB_FS_SRC.
2. changing PLLU post-divider to /2 (DIVP=1) according to Technical
Reference Manual.
Fixes: e745f992cf4b ("clk: tegra: Rework pll_u")
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
---
drivers/clk/tegra/clk-tegra210.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -2054,9 +2054,9 @@ static struct div_nmp pllu_nmp = {
};
static struct tegra_clk_pll_freq_table pll_u_freq_table[] = {
- { 12000000, 480000000, 40, 1, 0, 0 },
- { 13000000, 480000000, 36, 1, 0, 0 }, /* actual: 468.0 MHz */
- { 38400000, 480000000, 25, 2, 0, 0 },
+ { 12000000, 480000000, 40, 1, 1, 0 },
+ { 13000000, 480000000, 36, 1, 1, 0 }, /* actual: 468.0 MHz */
+ { 38400000, 480000000, 25, 2, 1, 0 },
{ 0, 0, 0, 0, 0, 0 },
};
@@ -2979,6 +2979,7 @@ static struct tegra_clk_init_table init_
{ TEGRA210_CLK_DFLL_REF, TEGRA210_CLK_PLL_P, 51000000, 1 },
{ TEGRA210_CLK_SBC4, TEGRA210_CLK_PLL_P, 12000000, 1 },
{ TEGRA210_CLK_PLL_RE_VCO, TEGRA210_CLK_CLK_MAX, 672000000, 1 },
+ { TEGRA210_CLK_PLL_U_OUT1, TEGRA210_CLK_CLK_MAX, 48000000, 1 },
{ TEGRA210_CLK_XUSB_GATE, TEGRA210_CLK_CLK_MAX, 0, 1 },
{ TEGRA210_CLK_XUSB_SS_SRC, TEGRA210_CLK_PLL_U_480M, 120000000, 0 },
{ TEGRA210_CLK_XUSB_FS_SRC, TEGRA210_CLK_PLL_U_48M, 48000000, 0 },
@@ -3004,7 +3005,6 @@ static struct tegra_clk_init_table init_
{ TEGRA210_CLK_PLL_DP, TEGRA210_CLK_CLK_MAX, 270000000, 0 },
{ TEGRA210_CLK_SOC_THERM, TEGRA210_CLK_PLL_P, 51000000, 0 },
{ TEGRA210_CLK_CCLK_G, TEGRA210_CLK_CLK_MAX, 0, 1 },
- { TEGRA210_CLK_PLL_U_OUT1, TEGRA210_CLK_CLK_MAX, 48000000, 1 },
{ TEGRA210_CLK_PLL_U_OUT2, TEGRA210_CLK_CLK_MAX, 60000000, 1 },
/* This MUST be the last entry. */
{ TEGRA210_CLK_CLK_MAX, TEGRA210_CLK_CLK_MAX, 0, 0 },