From: Piotr Marczak <piotr.marczak@intel.com>
Date: Wed, 6 Feb 2019 15:08:19 -0800
Subject: i40e: Fix for 10G ports LED not blinking
Patch-mainline: v5.2-rc1
Git-commit: 26221331733137eafd205bf5046846a10539b89c
References: jsc#SLE-4797
On some hardware LEDs would not blink after command 'ethtool -p {eth-port}'
in certain circumstances. Now, function does not care about the activity
of the LED (though still preserves its state) but forcibly executes
identification blinking and then restores the LED state.
Signed-off-by: Piotr Marczak <piotr.marczak@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
drivers/net/ethernet/intel/i40e/i40e_common.c | 33 --------------------------
1 file changed, 33 deletions(-)
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -1489,7 +1489,6 @@ static u32 i40e_led_is_mine(struct i40e_
**/
u32 i40e_led_get(struct i40e_hw *hw)
{
- u32 current_mode = 0;
u32 mode = 0;
int i;
@@ -1502,21 +1501,6 @@ u32 i40e_led_get(struct i40e_hw *hw)
if (!gpio_val)
continue;
- /* ignore gpio LED src mode entries related to the activity
- * LEDs
- */
- current_mode = ((gpio_val & I40E_GLGEN_GPIO_CTL_LED_MODE_MASK)
- >> I40E_GLGEN_GPIO_CTL_LED_MODE_SHIFT);
- switch (current_mode) {
- case I40E_COMBINED_ACTIVITY:
- case I40E_FILTER_ACTIVITY:
- case I40E_MAC_ACTIVITY:
- case I40E_LINK_ACTIVITY:
- continue;
- default:
- break;
- }
-
mode = (gpio_val & I40E_GLGEN_GPIO_CTL_LED_MODE_MASK) >>
I40E_GLGEN_GPIO_CTL_LED_MODE_SHIFT;
break;
@@ -1536,7 +1520,6 @@ u32 i40e_led_get(struct i40e_hw *hw)
**/
void i40e_led_set(struct i40e_hw *hw, u32 mode, bool blink)
{
- u32 current_mode = 0;
int i;
if (mode & 0xfffffff0)
@@ -1550,22 +1533,6 @@ void i40e_led_set(struct i40e_hw *hw, u3
if (!gpio_val)
continue;
-
- /* ignore gpio LED src mode entries related to the activity
- * LEDs
- */
- current_mode = ((gpio_val & I40E_GLGEN_GPIO_CTL_LED_MODE_MASK)
- >> I40E_GLGEN_GPIO_CTL_LED_MODE_SHIFT);
- switch (current_mode) {
- case I40E_COMBINED_ACTIVITY:
- case I40E_FILTER_ACTIVITY:
- case I40E_MAC_ACTIVITY:
- case I40E_LINK_ACTIVITY:
- continue;
- default:
- break;
- }
-
gpio_val &= ~I40E_GLGEN_GPIO_CTL_LED_MODE_MASK;
/* this & is a bit of paranoia, but serves as a range check */
gpio_val |= ((mode << I40E_GLGEN_GPIO_CTL_LED_MODE_SHIFT) &