From: John W Linville <linville@tuxdriver.com>
Date: Fri, 21 Jul 2017 14:12:24 -0400
Subject: igb: support BCM54616 PHY
Patch-mainline: v4.14-rc1
Git-commit: eeb0149660a21c61122d4937bd406aa4f334c1e4
References: bsc#1056651 FATE#322191 bsc#1056643 FATE#322192
The management port on an Edgecore AS7712-32 switch uses an igb MAC, but
it uses a BCM54616 PHY. Without a patch like this, loading the igb
module produces dmesg output like this:
[ 3.439125] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 3.439866] igb: probe of 0000:00:14.0 failed with error -2
Signed-off-by: John W Linville <linville@tuxdriver.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Benjamin Poirier <bpoirier@suse.com>
---
drivers/net/ethernet/intel/igb/e1000_82575.c | 6 ++++++
drivers/net/ethernet/intel/igb/e1000_defines.h | 1 +
drivers/net/ethernet/intel/igb/e1000_hw.h | 1 +
3 files changed, 8 insertions(+)
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -340,6 +340,9 @@ static s32 igb_init_phy_params_82575(str
phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580;
phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88;
break;
+ case BCM54616_E_PHY_ID:
+ phy->type = e1000_phy_bcm54616;
+ break;
default:
ret_val = -E1000_ERR_PHY;
goto out;
@@ -1659,6 +1662,9 @@ static s32 igb_setup_copper_link_82575(s
case e1000_phy_82580:
ret_val = igb_copper_link_setup_82580(hw);
break;
+ case e1000_phy_bcm54616:
+ ret_val = 0;
+ break;
default:
ret_val = -E1000_ERR_PHY;
break;
--- a/drivers/net/ethernet/intel/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -889,6 +889,7 @@
#define I210_I_PHY_ID 0x01410C00
#define M88E1543_E_PHY_ID 0x01410EA0
#define M88E1512_E_PHY_ID 0x01410DD0
+#define BCM54616_E_PHY_ID 0x03625D10
/* M88E1000 Specific Registers */
#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
--- a/drivers/net/ethernet/intel/igb/e1000_hw.h
+++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
@@ -128,6 +128,7 @@ enum e1000_phy_type {
e1000_phy_ife,
e1000_phy_82580,
e1000_phy_i210,
+ e1000_phy_bcm54616,
};
enum e1000_bus_type {