From: James Smart <jsmart2021@gmail.com>
Date: Tue, 12 Mar 2019 16:30:13 -0700
Subject: [PATCH] scsi: lpfc: Stop adapter if pci errors detected
References: bsc#1136217,jsc#SLE-4722
Git-commit: 32a9310076e4f00ac6d8a5a2d39b953d199bef0d
Patch-mainline: v5.2-rc1

In a couple of cases, the driver detected a pci error (via pci device state
or via failed register reads) but didn't take any action to disable the
device.  Additionally, the driver is ignoring the status of pci
configuration space reads.

Having the driver take the adapter offline whenever the pci error is
detected.  Pay attention to pci_config_space_read status and return failure
if an error is seen.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
 drivers/scsi/lpfc/lpfc_init.c |  7 ++++++-
 drivers/scsi/lpfc/lpfc_sli.c  | 11 +++++++++--
 2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 05902018ea2f..03119543804a 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1844,8 +1844,12 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
 	/* If the pci channel is offline, ignore possible errors, since
 	 * we cannot communicate with the pci card anyway.
 	 */
-	if (pci_channel_offline(phba->pcidev))
+	if (pci_channel_offline(phba->pcidev)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"3166 pci channel is offline\n");
+		lpfc_sli4_offline_eratt(phba);
 		return;
+	}
 
 	memset(&portsmphr_reg, 0, sizeof(portsmphr_reg));
 	if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
@@ -1922,6 +1926,7 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
 			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"3151 PCI bus read access failure: x%x\n",
 				readl(phba->sli4_hba.u.if_type2.STATUSregaddr));
+			lpfc_sli4_offline_eratt(phba);
 			return;
 		}
 		reg_err1 = readl(phba->sli4_hba.u.if_type2.ERR1regaddr);
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index d48b522bc888..0e899f0b9eea 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -4487,7 +4487,9 @@ lpfc_sli_brdreset(struct lpfc_hba *phba)
 	}
 
 	/* Turn off parity checking and serr during the physical reset */
-	pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value);
+	if (pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value))
+		return -EIO;
+
 	pci_write_config_word(phba->pcidev, PCI_COMMAND,
 			      (cfg_value &
 			       ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
@@ -4564,7 +4566,12 @@ lpfc_sli4_brdreset(struct lpfc_hba *phba)
 			"0389 Performing PCI function reset!\n");
 
 	/* Turn off parity checking and serr during the physical reset */
-	pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value);
+	if (pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value)) {
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"3205 PCI read Config failed\n");
+		return -EIO;
+	}
+
 	pci_write_config_word(phba->pcidev, PCI_COMMAND, (cfg_value &
 			      ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
 
-- 
2.16.4