From 1208f9e1d758c991b0a46a1bd60c616b906bbe27 Mon Sep 17 00:00:00 2001
From: Hardik Gajjar <hgajjar@de.adit-jv.com>
Date: Thu, 6 Feb 2020 12:49:23 +0100
Subject: [PATCH] USB: hub: Fix the broken detection of USB3 device in SMSC hub
Git-commit: 1208f9e1d758c991b0a46a1bd60c616b906bbe27
References: git-fixes
Patch-mainline: v5.6-rc3
Renesas R-Car H3ULCB + Kingfisher Infotainment Board is either not able
to detect the USB3.0 mass storage devices or is detecting those as
USB2.0 high speed devices.
The explanation given by Renesas is that, due to a HW issue, the XHCI
driver does not wake up after going to sleep on connecting a USB3.0
device.
In order to mitigate that, disable the auto-suspend feature
specifically for SMSC hubs from hub_probe() function, as a quirk.
Renesas Kingfisher Infotainment Board has two USB3.0 ports (CN2) which
are connected via USB5534B 4-port SuperSpeed/Hi-Speed, low-power,
configurable hub controller.
[1] SanDisk USB 3.0 device detected as USB-2.0 before the patch
[ 74.036390] usb 5-1.1: new high-speed USB device number 4 using xhci-hcd
[ 74.061598] usb 5-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00
[ 74.069976] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 74.077303] usb 5-1.1: Product: Ultra
[ 74.080980] usb 5-1.1: Manufacturer: SanDisk
[ 74.085263] usb 5-1.1: SerialNumber: 4C530001110208116550
[2] SanDisk USB 3.0 device detected as USB-3.0 after the patch
[ 34.565078] usb 6-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[ 34.588719] usb 6-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00
[ 34.597098] usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 34.604430] usb 6-1.1: Product: Ultra
[ 34.608110] usb 6-1.1: Manufacturer: SanDisk
[ 34.612397] usb 6-1.1: SerialNumber: 4C530001110208116550
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1580989763-32291-1-git-send-email-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
---
drivers/usb/core/hub.c | 15 +++++++++++++++
drivers/usb/core/hub.h | 1 +
2 files changed, 16 insertions(+)
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -36,7 +36,9 @@
#include "otg_whitelist.h"
#define USB_VENDOR_GENESYS_LOGIC 0x05e3
+#define USB_VENDOR_SMSC 0x0424
#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01
+#define HUB_QUIRK_DISABLE_AUTOSUSPEND 0x02
/* Protect struct usb_device->state and ->children members
* Note: Both are also protected by ->dev.sem, except that ->state can
@@ -1685,6 +1687,10 @@ static void hub_disconnect(struct usb_in
kfree(hub->buffer);
pm_suspend_ignore_children(&intf->dev, false);
+
+ if (hub->quirk_disable_autosuspend)
+ usb_autopm_put_interface(intf);
+
kref_put(&hub->kref, hub_release);
}
@@ -1811,6 +1817,11 @@ descriptor_error:
if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND)
hub->quirk_check_port_auto_suspend = 1;
+ if (id->driver_info & HUB_QUIRK_DISABLE_AUTOSUSPEND) {
+ hub->quirk_disable_autosuspend = 1;
+ usb_autopm_get_interface(intf);
+ }
+
if (hub_configure(hub, endpoint) >= 0)
return 0;
@@ -5285,6 +5296,10 @@ out_hdev_lock:
}
static const struct usb_device_id hub_id_table[] = {
+ { .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_CLASS,
+ .idVendor = USB_VENDOR_SMSC,
+ .bInterfaceClass = USB_CLASS_HUB,
+ .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
{ .match_flags = USB_DEVICE_ID_MATCH_VENDOR
| USB_DEVICE_ID_MATCH_INT_CLASS,
.idVendor = USB_VENDOR_GENESYS_LOGIC,
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -69,6 +69,7 @@ struct usb_hub {
unsigned quiescing:1;
unsigned disconnected:1;
unsigned in_reset:1;
+ unsigned quirk_disable_autosuspend:1;
unsigned quirk_check_port_auto_suspend:1;