From: Andres Rodriguez <andresx7@gmail.com>
Date: Fri, 24 Feb 2017 20:50:20 -0500
Subject: drm/amdgpu: workaround tonga HW bug in HQD programming sequence
Git-commit: ecd910eb1f091dd25f4a737a3bc50c0c8892eac7
Patch-mainline: v4.13-rc1
References: FATE#326289 FATE#326079 FATE#326049 FATE#322398 FATE#326166
Tonga based asics may experience hangs when an HQD's EOP parameters
are modified.
Workaround this HW issue by avoiding writes to these registers for
tonga asics.
Based on the following ROCm commit:
2a0fb8 - drm/amdgpu: Synchronize KFD HQD load protocol with CP scheduler
>From the ROCm git repository:
https://github.com/RadeonOpenCompute/ROCK-Kernel-Driver.git
CC: Jay Cornwall <Jay.Cornwall@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Petr Tesarik <ptesarik@suse.com>
---
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
@@ -5003,7 +5003,21 @@ int gfx_v8_0_mqd_commit(struct amdgpu_de
WREG32_FIELD(CP_PQ_WPTR_POLL_CNTL, EN, 0);
/* program all HQD registers */
- for (mqd_reg = mmCP_HQD_VMID; mqd_reg <= mmCP_HQD_ERROR; mqd_reg++)
+ for (mqd_reg = mmCP_HQD_VMID; mqd_reg <= mmCP_HQD_EOP_CONTROL; mqd_reg++)
+ WREG32(mqd_reg, mqd_data[mqd_reg - mmCP_MQD_BASE_ADDR]);
+
+ /* Tonga errata: EOP RPTR/WPTR should be left unmodified.
+ * This is safe since EOP RPTR==WPTR for any inactive HQD
+ * on ASICs that do not support context-save.
+ * EOP writes/reads can start anywhere in the ring.
+ */
+ if (adev->asic_type != CHIP_TONGA) {
+ WREG32(mmCP_HQD_EOP_RPTR, mqd->cp_hqd_eop_rptr);
+ WREG32(mmCP_HQD_EOP_WPTR, mqd->cp_hqd_eop_wptr);
+ WREG32(mmCP_HQD_EOP_WPTR_MEM, mqd->cp_hqd_eop_wptr_mem);
+ }
+
+ for (mqd_reg = mmCP_HQD_EOP_EVENTS; mqd_reg <= mmCP_HQD_ERROR; mqd_reg++)
WREG32(mqd_reg, mqd_data[mqd_reg - mmCP_MQD_BASE_ADDR]);
/* activate the HQD */