From: Tom St Denis <tom.stdenis@amd.com>
Date: Thu, 7 Sep 2017 07:48:16 -0400
Subject: drm/amd/powerplay: Port vega10_thermal.c over to PP_CAP
Git-commit: f85a49bdb6eed2705a7e5097e5bd1ee0e8da1d9f
Patch-mainline: v4.15-rc1
References: FATE#326289 FATE#326079 FATE#326049 FATE#322398 FATE#326166

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Petr Tesarik <ptesarik@suse.com>
---
 drivers/gpu/drm/amd/powerplay/hwmgr/vega10_thermal.c |   16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_thermal.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_thermal.c
@@ -54,8 +54,7 @@ int vega10_fan_ctrl_get_fan_speed_info(s
 	fan_speed_info->min_percent = 0;
 	fan_speed_info->max_percent = 100;
 
-	if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
-			PHM_PlatformCaps_FanSpeedInTableIsRPM) &&
+	if (PP_CAP(PHM_PlatformCaps_FanSpeedInTableIsRPM) &&
 		hwmgr->thermal_controller.fanInfo.
 		ucTachometerPulsesPerRevolution) {
 		fan_speed_info->supports_rpm_read = true;
@@ -279,8 +278,7 @@ int vega10_fan_ctrl_set_fan_speed_percen
 	if (speed > 100)
 		speed = 100;
 
-	if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
-			PHM_PlatformCaps_MicrocodeFanControl))
+	if (PP_CAP(PHM_PlatformCaps_MicrocodeFanControl))
 		vega10_fan_ctrl_stop_smc_fan_control(hwmgr);
 
 	reg = soc15_get_register_offset(THM_HWID, 0,
@@ -319,8 +317,7 @@ int vega10_fan_ctrl_reset_fan_speed_to_d
 	if (hwmgr->thermal_controller.fanInfo.bNoFan)
 		return 0;
 
-	if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
-			PHM_PlatformCaps_MicrocodeFanControl)) {
+	if (PP_CAP(PHM_PlatformCaps_MicrocodeFanControl)) {
 		result = vega10_fan_ctrl_start_smc_fan_control(hwmgr);
 	} else
 		result = vega10_fan_ctrl_set_default_mode(hwmgr);
@@ -346,8 +343,7 @@ int vega10_fan_ctrl_set_fan_speed_rpm(st
 			(speed > hwmgr->thermal_controller.fanInfo.ulMaxRPM))
 		return -1;
 
-	if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
-			PHM_PlatformCaps_MicrocodeFanControl))
+	if (PP_CAP(PHM_PlatformCaps_MicrocodeFanControl))
 		result = vega10_fan_ctrl_stop_smc_fan_control(hwmgr);
 
 	if (!result) {
@@ -627,10 +623,8 @@ int tf_vega10_thermal_start_smc_fan_cont
  * this function was included in the table.
  * Make sure that we still think controlling the fan is OK.
 */
-	if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
-			PHM_PlatformCaps_MicrocodeFanControl)) {
+	if (PP_CAP(PHM_PlatformCaps_MicrocodeFanControl))
 		vega10_fan_ctrl_start_smc_fan_control(hwmgr);
-	}
 
 	return 0;
 }