From: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Date: Tue, 27 Feb 2018 12:12:46 -0500
Subject: drm/amd/display: Fix takover from VGA mode
Git-commit: bd9bc355be45dd2295ca746aa05b058be4cf94cc
Patch-mainline: v4.16-rc5
References: FATE#326289 FATE#326079 FATE#326049 FATE#322398 FATE#326166
HW Engineer's Notes:
During switch from vga->extended, if we set the VGA_TEST_ENABLE and then
hit the VGA_TEST_RENDER_START, then the DCHUBP timing gets updated correctly.
Then vBIOS will have it poll for the VGA_TEST_RENDER_DONE and unset
VGA_TEST_ENABLE, to leave it in the same state as before.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Petr Tesarik <ptesarik@suse.com>
---
drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h | 10 ++++++++--
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 10 ++++++++++
2 files changed, 18 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h
@@ -236,6 +236,7 @@
SR(D2VGA_CONTROL), \
SR(D3VGA_CONTROL), \
SR(D4VGA_CONTROL), \
+ SR(VGA_TEST_CONTROL), \
SR(DC_IP_REQUEST_CNTL), \
BL_REG_LIST()
@@ -337,6 +338,7 @@ struct dce_hwseq_registers {
uint32_t D2VGA_CONTROL;
uint32_t D3VGA_CONTROL;
uint32_t D4VGA_CONTROL;
+ uint32_t VGA_TEST_CONTROL;
/* MMHUB registers. read only. temporary hack */
uint32_t VM_CONTEXT0_PAGE_TABLE_BASE_ADDR_HI32;
uint32_t VM_CONTEXT0_PAGE_TABLE_BASE_ADDR_LO32;
@@ -494,7 +496,9 @@ struct dce_hwseq_registers {
HWS_SF(, DOMAIN7_PG_STATUS, DOMAIN7_PGFSM_PWR_STATUS, mask_sh), \
HWS_SF(, DC_IP_REQUEST_CNTL, IP_REQUEST_EN, mask_sh), \
HWS_SF(, LVTMA_PWRSEQ_CNTL, LVTMA_BLON, mask_sh), \
- HWS_SF(, LVTMA_PWRSEQ_STATE, LVTMA_PWRSEQ_TARGET_STATE_R, mask_sh)
+ HWS_SF(, LVTMA_PWRSEQ_STATE, LVTMA_PWRSEQ_TARGET_STATE_R, mask_sh), \
+ HWS_SF(, VGA_TEST_CONTROL, VGA_TEST_ENABLE, mask_sh),\
+ HWS_SF(, VGA_TEST_CONTROL, VGA_TEST_RENDER_START, mask_sh)
#define HWSEQ_REG_FIELD_LIST(type) \
type DCFE_CLOCK_ENABLE; \
@@ -583,7 +587,9 @@ struct dce_hwseq_registers {
type DCFCLK_GATE_DIS; \
type DCHUBBUB_GLOBAL_TIMER_REFDIV; \
type DENTIST_DPPCLK_WDIVIDER; \
- type DENTIST_DISPCLK_WDIVIDER;
+ type DENTIST_DISPCLK_WDIVIDER; \
+ type VGA_TEST_ENABLE; \
+ type VGA_TEST_RENDER_START;
struct dce_hwseq_shift {
HWSEQ_REG_FIELD_LIST(uint8_t)
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -242,6 +242,16 @@ static void disable_vga(
REG_WRITE(D2VGA_CONTROL, 0);
REG_WRITE(D3VGA_CONTROL, 0);
REG_WRITE(D4VGA_CONTROL, 0);
+
+ /* HW Engineer's Notes:
+ * During switch from vga->extended, if we set the VGA_TEST_ENABLE and
+ * then hit the VGA_TEST_RENDER_START, then the DCHUBP timing gets updated correctly.
+ *
+ * Then vBIOS will have it poll for the VGA_TEST_RENDER_DONE and unset
+ * VGA_TEST_ENABLE, to leave it in the same state as before.
+ */
+ REG_UPDATE(VGA_TEST_CONTROL, VGA_TEST_ENABLE, 1);
+ REG_UPDATE(VGA_TEST_CONTROL, VGA_TEST_RENDER_START, 1);
}
static void dpp_pg_control(