From faec44b6838312484d63e82286087cf2d5ebb891 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Fri, 12 Jan 2018 00:36:48 -0800
Subject: [PATCH] Input: goodix - disable IRQs while suspended
Git-commit: faec44b6838312484d63e82286087cf2d5ebb891
Patch-mainline: v4.16-rc1
References: bsc#1051510

We should not try to do any i2c transfers before the controller is
resumed (which happens before our resume method gets called).

So we need to disable our IRQ while suspended to enforce this. The
code paths for devices with GPIOs for the int and reset pins already
disable the IRQ the through goodix_free_irq().

This commit also disables the IRQ while suspended for devices without
GPIOs for the int and reset pins.

This fixes the i2c bus sometimes getting stuck after a suspend/resume
causing the touchscreen to sometimes not work after a suspend/resume.
This has been tested on a GPD pocked device.

Buglink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10
Buglink: https://www.reddit.com/r/GPDPocket/comments/7niut2/fix_for_broken_touch_after_resume_all_linux/
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>

---
 drivers/input/touchscreen/goodix.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -778,8 +778,10 @@ static int __maybe_unused goodix_suspend
 	int error;
 
 	/* We need gpio pins to suspend/resume */
-	if (!ts->gpiod_int || !ts->gpiod_rst)
+	if (!ts->gpiod_int || !ts->gpiod_rst) {
+		disable_irq(client->irq);
 		return 0;
+	}
 
 	wait_for_completion(&ts->firmware_loading_complete);
 
@@ -819,8 +821,10 @@ static int __maybe_unused goodix_resume(
 	struct goodix_ts_data *ts = i2c_get_clientdata(client);
 	int error;
 
-	if (!ts->gpiod_int || !ts->gpiod_rst)
+	if (!ts->gpiod_int || !ts->gpiod_rst) {
+		enable_irq(client->irq);
 		return 0;
+	}
 
 	/*
 	 * Exit sleep mode by outputting HIGH level to INT pin