From: Sinan Kaya <okaya@codeaurora.org>
Date: Sun, 25 Mar 2018 10:39:18 -0400
Subject: bnx2x: Eliminate duplicate barriers on weakly-ordered archs
Patch-mainline: v4.17-rc1
Git-commit: 7f883c774e1bad34d5474d8a74989336631ce178
References: bsc#1104402 FATE#325899

Code includes wmb() followed by writel(). writel() already has a
barrier on some architectures like arm64.

This ends up CPU observing two barriers back to back before executing
the register write.

Since code already has an explicit barrier call, changing writel() to
writel_relaxed().

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: David Chang <dchang@suse.com>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x.h         |   12 ++++++++----
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c     |    2 +-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h     |    4 ++--
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c |    2 +-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c    |    4 ++--
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c    |    4 +++-
 6 files changed, 17 insertions(+), 11 deletions(-)

--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -166,6 +166,12 @@ do {						\
 #define REG_RD8(bp, offset)		readb(REG_ADDR(bp, offset))
 #define REG_RD16(bp, offset)		readw(REG_ADDR(bp, offset))
 
+#define REG_WR_RELAXED(bp, offset, val)	\
+	writel_relaxed((u32)val, REG_ADDR(bp, offset))
+
+#define REG_WR16_RELAXED(bp, offset, val) \
+	writew_relaxed((u16)val, REG_ADDR(bp, offset))
+
 #define REG_WR(bp, offset, val)		writel((u32)val, REG_ADDR(bp, offset))
 #define REG_WR8(bp, offset, val)	writeb((u8)val, REG_ADDR(bp, offset))
 #define REG_WR16(bp, offset, val)	writew((u16)val, REG_ADDR(bp, offset))
@@ -758,10 +764,8 @@ struct bnx2x_fastpath {
 #if (BNX2X_DB_SHIFT < BNX2X_DB_MIN_SHIFT)
 #error "Min DB doorbell stride is 8"
 #endif
-#define DOORBELL(bp, cid, val) \
-	do { \
-		writel((u32)(val), bp->doorbells + (bp->db_size * (cid))); \
-	} while (0)
+#define DOORBELL_RELAXED(bp, cid, val) \
+	writel_relaxed((u32)(val), (bp)->doorbells + ((bp)->db_size * (cid)))
 
 /* TX CSUM helpers */
 #define SKB_CS_OFF(skb)		(offsetof(struct tcphdr, check) - \
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -4156,7 +4156,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_b
 	/* make sure descriptor update is observed by HW */
 	wmb();
 
-	DOORBELL(bp, txdata->cid, txdata->tx_db.raw);
+	DOORBELL_RELAXED(bp, txdata->cid, txdata->tx_db.raw);
 
 	mmiowb();
 
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -522,8 +522,8 @@ static inline void bnx2x_update_rx_prod(
 	wmb();
 
 	for (i = 0; i < sizeof(rx_prods)/4; i++)
-		REG_WR(bp, fp->ustorm_rx_prods_offset + i*4,
-		       ((u32 *)&rx_prods)[i]);
+		REG_WR_RELAXED(bp, fp->ustorm_rx_prods_offset + i * 4,
+			       ((u32 *)&rx_prods)[i]);
 
 	mmiowb(); /* keep prod updates ordered */
 
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -2593,7 +2593,7 @@ static int bnx2x_run_loopback(struct bnx
 	txdata->tx_db.data.prod += 2;
 	/* make sure descriptor update is observed by the HW */
 	wmb();
-	DOORBELL(bp, txdata->cid, txdata->tx_db.raw);
+	DOORBELL_RELAXED(bp, txdata->cid, txdata->tx_db.raw);
 
 	mmiowb();
 	barrier();
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -3817,8 +3817,8 @@ static void bnx2x_sp_prod_update(struct
 	 */
 	mb();
 
-	REG_WR16(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func),
-		 bp->spq_prod_idx);
+	REG_WR16_RELAXED(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func),
+			 bp->spq_prod_idx);
 	mmiowb();
 }
 
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
@@ -170,7 +170,9 @@ static int bnx2x_send_msg2pf(struct bnx2
 	wmb();
 
 	/* Trigger the PF FW */
-	writeb(1, &zone_data->trigger.vf_pf_channel.addr_valid);
+	writeb_relaxed(1, &zone_data->trigger.vf_pf_channel.addr_valid);
+
+	mmiowb();
 
 	/* Wait for PF to complete */
 	while ((tout >= 0) && (!*done)) {