From 4972f70a202eeb3c270e182c8b83fc271288076c Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <ville.syrjala@linux.intel.com>
Date: Wed, 29 Nov 2017 17:37:32 +0200
Subject: [PATCH] drm/i915: Pass crtc state to intel_pipe_{enable,disable}()
Mime-version: 1.0
Content-type: text/plain; charset=UTF-8
Content-transfer-encoding: 8bit
Git-commit: 4972f70a202eeb3c270e182c8b83fc271288076c
Patch-mainline: v4.16-rc1
References: FATE#322643 bsc#1055900
Get rid of the crtc->config usages from within
intel_pipe_{enable,disable}() by passing in the appropriate
crtc state.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129153732.3612-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Takashi Iwai <tiwai@suse.de>
---
drivers/gpu/drm/i915/intel_display.c | 76 ++++++++++-------------------------
1 file changed, 23 insertions(+), 53 deletions(-)
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1038,28 +1038,14 @@ static void intel_wait_for_pipe_scanline
wait_for_pipe_scanline_moving(crtc, true);
}
-/*
- * intel_wait_for_pipe_off - wait for pipe to turn off
- * @crtc: crtc whose pipe to wait for
- *
- * After disabling a pipe, we can't wait for vblank in the usual way,
- * spinning on the vblank interrupt status bit, since we won't actually
- * see an interrupt when the pipe is disabled.
- *
- * On Gen4 and above:
- * wait for the pipe register state bit to turn off
- *
- * Otherwise:
- * wait for the display line value to settle (it usually
- * ends up stopping at the start of the next frame).
- *
- */
-static void intel_wait_for_pipe_off(struct intel_crtc *crtc)
+static void
+intel_wait_for_pipe_off(const struct intel_crtc_state *old_crtc_state)
{
+ struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
- enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
if (INTEL_GEN(dev_priv) >= 4) {
+ enum transcoder cpu_transcoder = old_crtc_state->cpu_transcoder;
i915_reg_t reg = PIPECONF(cpu_transcoder);
/* Wait for the Pipe State to go off */
@@ -1828,19 +1814,12 @@ enum pipe intel_crtc_pch_transcoder(stru
return crtc->pipe;
}
-/**
- * intel_enable_pipe - enable a pipe, asserting requirements
- * @crtc: crtc responsible for the pipe
- *
- * Enable @crtc's pipe, making sure that various hardware specific requirements
- * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
- */
-static void intel_enable_pipe(struct intel_crtc *crtc)
+static void intel_enable_pipe(const struct intel_crtc_state *new_crtc_state)
{
- struct drm_device *dev = crtc->base.dev;
- struct drm_i915_private *dev_priv = to_i915(dev);
+ struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->base.crtc);
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+ enum transcoder cpu_transcoder = new_crtc_state->cpu_transcoder;
enum pipe pipe = crtc->pipe;
- enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
i915_reg_t reg;
u32 val;
@@ -1854,12 +1833,12 @@ static void intel_enable_pipe(struct int
* need the check.
*/
if (HAS_GMCH_DISPLAY(dev_priv)) {
- if (intel_crtc_has_type(crtc->config, INTEL_OUTPUT_DSI))
+ if (intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI))
assert_dsi_pll_enabled(dev_priv);
else
assert_pll_enabled(dev_priv, pipe);
} else {
- if (crtc->config->has_pch_encoder) {
+ if (new_crtc_state->has_pch_encoder) {
/* if driving the PCH, we need FDI enabled */
assert_fdi_rx_pll_enabled(dev_priv,
intel_crtc_pch_transcoder(crtc));
@@ -1887,24 +1866,15 @@ static void intel_enable_pipe(struct int
* when it's derived from the timestamps. So let's wait for the
* pipe to start properly before we call drm_crtc_vblank_on()
*/
- if (dev->max_vblank_count == 0)
+ if (dev_priv->drm.max_vblank_count == 0)
intel_wait_for_pipe_scanline_moving(crtc);
}
-/**
- * intel_disable_pipe - disable a pipe, asserting requirements
- * @crtc: crtc whose pipes is to be disabled
- *
- * Disable the pipe of @crtc, making sure that various hardware
- * specific requirements are met, if applicable, e.g. plane
- * disabled, panel fitter off, etc.
- *
- * Will wait until the pipe has shut down before returning.
- */
-static void intel_disable_pipe(struct intel_crtc *crtc)
+static void intel_disable_pipe(const struct intel_crtc_state *old_crtc_state)
{
+ struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
- enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
+ enum transcoder cpu_transcoder = old_crtc_state->cpu_transcoder;
enum pipe pipe = crtc->pipe;
i915_reg_t reg;
u32 val;
@@ -1926,7 +1896,7 @@ static void intel_disable_pipe(struct in
* Double wide has implications for planes
* so best keep it disabled when not needed.
*/
- if (crtc->config->double_wide)
+ if (old_crtc_state->double_wide)
val &= ~PIPECONF_DOUBLE_WIDE;
/* Don't disable pipe or pipe PLLs if needed */
@@ -1935,7 +1905,7 @@ static void intel_disable_pipe(struct in
I915_WRITE(reg, val);
if ((val & PIPECONF_ENABLE) == 0)
- intel_wait_for_pipe_off(crtc);
+ intel_wait_for_pipe_off(old_crtc_state);
}
static unsigned int intel_tile_size(const struct drm_i915_private *dev_priv)
@@ -5354,7 +5324,7 @@ static void ironlake_crtc_enable(struct
if (dev_priv->display.initial_watermarks != NULL)
dev_priv->display.initial_watermarks(old_intel_state, intel_crtc->config);
- intel_enable_pipe(intel_crtc);
+ intel_enable_pipe(pipe_config);
if (intel_crtc->config->has_pch_encoder)
ironlake_pch_enable(pipe_config);
@@ -5473,7 +5443,7 @@ static void haswell_crtc_enable(struct i
/* XXX: Do the pipe assertions at the right place for BXT DSI. */
if (!transcoder_is_dsi(cpu_transcoder))
- intel_enable_pipe(intel_crtc);
+ intel_enable_pipe(pipe_config);
if (intel_crtc->config->has_pch_encoder)
lpt_pch_enable(pipe_config);
@@ -5539,7 +5509,7 @@ static void ironlake_crtc_disable(struct
drm_crtc_vblank_off(crtc);
assert_vblank_disabled(crtc);
- intel_disable_pipe(intel_crtc);
+ intel_disable_pipe(old_crtc_state);
ironlake_pfit_disable(intel_crtc, false);
@@ -5591,7 +5561,7 @@ static void haswell_crtc_disable(struct
/* XXX: Do the pipe assertions at the right place for BXT DSI. */
if (!transcoder_is_dsi(cpu_transcoder))
- intel_disable_pipe(intel_crtc);
+ intel_disable_pipe(old_crtc_state);
if (intel_crtc_has_type(intel_crtc->config, INTEL_OUTPUT_DP_MST))
intel_ddi_set_vc_payload_alloc(intel_crtc->config, false);
@@ -5769,7 +5739,7 @@ static void valleyview_crtc_enable(struc
dev_priv->display.initial_watermarks(old_intel_state,
pipe_config);
- intel_enable_pipe(intel_crtc);
+ intel_enable_pipe(pipe_config);
assert_vblank_disabled(crtc);
drm_crtc_vblank_on(crtc);
@@ -5828,7 +5798,7 @@ static void i9xx_crtc_enable(struct inte
intel_crtc->config);
else
intel_update_watermarks(intel_crtc);
- intel_enable_pipe(intel_crtc);
+ intel_enable_pipe(pipe_config);
assert_vblank_disabled(crtc);
drm_crtc_vblank_on(crtc);
@@ -5872,7 +5842,7 @@ static void i9xx_crtc_disable(struct int
drm_crtc_vblank_off(crtc);
assert_vblank_disabled(crtc);
- intel_disable_pipe(intel_crtc);
+ intel_disable_pipe(old_crtc_state);
i9xx_pfit_disable(intel_crtc);