From: Jacob Keller <jacob.e.keller@intel.com>
Date: Thu, 7 Sep 2017 08:05:48 -0400
Subject: i40e/i40evf: fix incorrect default ITR values on driver load
Patch-mainline: v4.15-rc1
Git-commit: 427025592955d245997b12923111e85f07850d5f
References: bsc#1101816 FATE#325147 FATE#325149
The ITR register expects to be programmed in units of 2 microseconds.
Because of this, all of the drivers I40E_ITR_* constants are in terms of
this 2 microsecond register.
Unfortunately, the rx_itr_default value is expected to be programmed in
microseconds.
Effectively the driver defaults to an ITR value of half the expected
value (in terms of minimum microseconds between interrupts).
Fix this by changing the default values to be calculated using
ITR_REG_TO_USEC macro which indicates that we're converting from the
register units into microseconds.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 4 ++--
drivers/net/ethernet/intel/i40e/i40e_txrx.h | 6 ++++--
drivers/net/ethernet/intel/i40evf/i40e_txrx.h | 6 ++++--
drivers/net/ethernet/intel/i40evf/i40evf_main.c | 4 ++--
4 files changed, 12 insertions(+), 8 deletions(-)
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -8983,8 +8983,8 @@ static int i40e_sw_init(struct i40e_pf *
I40E_FLAG_MSIX_ENABLED;
/* Set default ITR */
- pf->rx_itr_default = I40E_ITR_DYNAMIC | I40E_ITR_RX_DEF;
- pf->tx_itr_default = I40E_ITR_DYNAMIC | I40E_ITR_TX_DEF;
+ pf->rx_itr_default = I40E_ITR_RX_DEF;
+ pf->tx_itr_default = I40E_ITR_TX_DEF;
/* Depending on PF configurations, it is possible that the RSS
* maximum might end up larger than the available queues
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
@@ -38,8 +38,10 @@
#define I40E_ITR_8K 0x003E
#define I40E_ITR_4K 0x007A
#define I40E_MAX_INTRL 0x3B /* reg uses 4 usec resolution */
-#define I40E_ITR_RX_DEF I40E_ITR_20K
-#define I40E_ITR_TX_DEF I40E_ITR_20K
+#define I40E_ITR_RX_DEF (ITR_REG_TO_USEC(I40E_ITR_20K) | \
+ I40E_ITR_DYNAMIC)
+#define I40E_ITR_TX_DEF (ITR_REG_TO_USEC(I40E_ITR_20K) | \
+ I40E_ITR_DYNAMIC)
#define I40E_ITR_DYNAMIC 0x8000 /* use top bit as a flag */
#define I40E_MIN_INT_RATE 250 /* ~= 1000000 / (I40E_MAX_ITR * 2) */
#define I40E_MAX_INT_RATE 500000 /* == 1000000 / (I40E_MIN_ITR * 2) */
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
@@ -38,8 +38,10 @@
#define I40E_ITR_8K 0x003E
#define I40E_ITR_4K 0x007A
#define I40E_MAX_INTRL 0x3B /* reg uses 4 usec resolution */
-#define I40E_ITR_RX_DEF I40E_ITR_20K
-#define I40E_ITR_TX_DEF I40E_ITR_20K
+#define I40E_ITR_RX_DEF (ITR_REG_TO_USEC(I40E_ITR_20K) | \
+ I40E_ITR_DYNAMIC)
+#define I40E_ITR_TX_DEF (ITR_REG_TO_USEC(I40E_ITR_20K) | \
+ I40E_ITR_DYNAMIC)
#define I40E_ITR_DYNAMIC 0x8000 /* use top bit as a flag */
#define I40E_MIN_INT_RATE 250 /* ~= 1000000 / (I40E_MAX_ITR * 2) */
#define I40E_MAX_INT_RATE 500000 /* == 1000000 / (I40E_MIN_ITR * 2) */
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -1223,7 +1223,7 @@ static int i40evf_alloc_queues(struct i4
tx_ring->netdev = adapter->netdev;
tx_ring->dev = &adapter->pdev->dev;
tx_ring->count = adapter->tx_desc_count;
- tx_ring->tx_itr_setting = (I40E_ITR_DYNAMIC | I40E_ITR_TX_DEF);
+ tx_ring->tx_itr_setting = I40E_ITR_TX_DEF;
if (adapter->flags & I40EVF_FLAG_WB_ON_ITR_CAPABLE)
tx_ring->flags |= I40E_TXR_FLAGS_WB_ON_ITR;
@@ -1232,7 +1232,7 @@ static int i40evf_alloc_queues(struct i4
rx_ring->netdev = adapter->netdev;
rx_ring->dev = &adapter->pdev->dev;
rx_ring->count = adapter->rx_desc_count;
- rx_ring->rx_itr_setting = (I40E_ITR_DYNAMIC | I40E_ITR_RX_DEF);
+ rx_ring->rx_itr_setting = I40E_ITR_RX_DEF;
}
adapter->num_active_queues = num_active_queues;