Blob Blame History Raw
From: Gangfeng Huang <gangfeng.huang@ni.com>
Date: Sat, 27 May 2017 09:17:53 +0800
Subject: igb: Fix error of RX network flow classification
Patch-mainline: v4.14-rc1
Git-commit: 94221ae75c869b28bceb76ae300b55d35c186406
References: bsc#1056651 FATE#322191 bsc#1056643 FATE#322192

After add an ethertype filter, if user change the adapter speed several
times, the error "ethtool -N: etype filters are all used" is reported by
igb driver.

In older patch, function igb_nfc_filter_exit() and igb_nfc_filter_restore()
is not paried. igb_nfc_filter_restore() exist in igb_up(), but function
igb_nfc_filter_exit() is exist in __igb_close(). In the process of speed
changing, only igb_nfc_filter_restore() is called, it will take a position
of ethertype bitmap.

Reproduce steps:
Step 1: Add a etype filter by ethtool
$ethtool -N eth0 flow-type ether proto 0x88F8 action 1
Step 2: Change the adapter speed to 100M/full duplex
$ethtool -s eth0 speed 100 duplex full
Step 3: Change the adapter speed to 1000M/full duplex
ethtool -s eth0 speed 1000 duplex full
Repeat step2 and step3, then dmesg the system log, you can find the error
message, add new ethtype filter is also failed.

This fixing is move igb_nfc_filter_exit() from __igb_close() to igb_down()
to make igb_nfc_filter_restore()/igb_nfc_filter_exit() is paired.

Signed-off-by: Gangfeng Huang <gangfeng.huang@ni.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Benjamin Poirier <bpoirier@suse.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1791,6 +1791,8 @@ void igb_down(struct igb_adapter *adapte
 	wr32(E1000_RCTL, rctl & ~E1000_RCTL_EN);
 	/* flush and sleep below */
 
+	igb_nfc_filter_exit(adapter);
+
 	netif_carrier_off(netdev);
 	netif_tx_stop_all_queues(netdev);
 
@@ -3317,8 +3319,6 @@ static int __igb_close(struct net_device
 	igb_down(adapter);
 	igb_free_irq(adapter);
 
-	igb_nfc_filter_exit(adapter);
-
 	igb_free_all_tx_resources(adapter);
 	igb_free_all_rx_resources(adapter);