From 1b5190c2e74c47ebe4bcecf7a072358ad9f1feaa Mon Sep 17 00:00:00 2001
From: Stefan Agner <stefan@agner.ch>
Date: Thu, 5 Jul 2018 14:18:19 +0200
Subject: [PATCH] mmc: sdhci: do not try to use 3.3V signaling if not supported
Git-commit: 1b5190c2e74c47ebe4bcecf7a072358ad9f1feaa
Patch-mainline: v4.19-rc1
References: bsc#1051510
For eMMC devices it is valid to only support 1.8V signaling. When
vqmmc is set to a fixed 1.8V regulator the stack tries to set 3.3V
initially and prints the following warning:
mmc1: Switching to 3.3V signalling voltage failed
Clear the MMC_SIGNAL_VOLTAGE_330 flag in case 3.3V is signaling is
not available. This prevents the stack from even trying to use
3.3V signaling and avoids the above warning.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
---
drivers/mmc/host/sdhci.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 1c828e0e9905..a7b5602ef6f7 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -3734,14 +3734,21 @@ int sdhci_setup_host(struct sdhci_host *host)
mmc_gpio_get_cd(host->mmc) < 0)
mmc->caps |= MMC_CAP_NEEDS_POLL;
- /* If vqmmc regulator and no 1.8V signalling, then there's no UHS */
if (!IS_ERR(mmc->supply.vqmmc)) {
ret = regulator_enable(mmc->supply.vqmmc);
+
+ /* If vqmmc provides no 1.8V signalling, then there's no UHS */
if (!regulator_is_supported_voltage(mmc->supply.vqmmc, 1700000,
1950000))
host->caps1 &= ~(SDHCI_SUPPORT_SDR104 |
SDHCI_SUPPORT_SDR50 |
SDHCI_SUPPORT_DDR50);
+
+ /* In eMMC case vqmmc might be a fixed 1.8V regulator */
+ if (!regulator_is_supported_voltage(mmc->supply.vqmmc, 2700000,
+ 3600000))
+ host->flags &= ~SDHCI_SIGNALING_330;
+
if (ret) {
pr_warn("%s: Failed to enable vqmmc regulator: %d\n",
mmc_hostname(mmc), ret);
--
2.18.0