From: Dexuan Cui <decui@microsoft.com>
Date: Mon, 26 Nov 2018 00:26:17 +0000
Patch-mainline: v4.20-rc6
Subject: scsi: storvsc: Fix a race in sub-channel creation that can cause panic
Git-commit: c967590457cae5ba4f018704c341641bdcecfdcf
References: fate#323887
We can concurrently try to open the same sub-channel from 2 paths:
path #1: vmbus_onoffer() -> vmbus_process_offer() -> handle_sc_creation().
path #2: storvsc_probe() -> storvsc_connect_to_vsp() ->
-> storvsc_channel_init() -> handle_multichannel_storage() ->
-> vmbus_are_subchannels_present() -> handle_sc_creation().
They conflict with each other, but it was not an issue before the recent
commit ae6935ed7d42 ("vmbus: split ring buffer allocation from open"),
because at the beginning of vmbus_open() we checked newchannel->state so
only one path could succeed, and the other would return with -EINVAL.
After ae6935ed7d42, the failing path frees the channel's ringbuffer by
vmbus_free_ring(), and this causes a panic later.
Commit ae6935ed7d42 itself is good, and it just reveals the longstanding
race. We can resolve the issue by removing path #2, i.e. removing the
second vmbus_are_subchannels_present() in handle_multichannel_storage().
BTW, the comment "Check to see if sub-channels have already been created"
in handle_multichannel_storage() is incorrect: when we unload the driver,
we first close the sub-channel(s) and then close the primary channel, next
the host sends rescind-offer message(s) so primary->sc_list will become
empty. This means the first vmbus_are_subchannels_present() in
handle_multichannel_storage() is never useful.
Fixes: ae6935ed7d42 ("vmbus: split ring buffer allocation from open")
Cc: stable@vger.kernel.org
Cc: Long Li <longli@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Olaf Hering <ohering@suse.de>
---
drivers/scsi/storvsc_drv.c | 61 +++++++++++++++++++++++-----------------------
1 file changed, 30 insertions(+), 31 deletions(-)
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -446,7 +446,6 @@ struct storvsc_device {
bool destroy;
bool drain_notify;
- bool open_sub_channel;
atomic_t num_outstanding_req;
struct Scsi_Host *host;
@@ -636,33 +635,38 @@ get_in_err:
static void handle_sc_creation(struct vmbus_channel *new_sc)
{
struct hv_device *device = new_sc->primary_channel->device_obj;
+ struct device *dev = &device->device;
struct storvsc_device *stor_device;
struct vmstorage_channel_properties props;
+ int ret;
stor_device = get_out_stor_device(device);
if (!stor_device)
return;
- if (stor_device->open_sub_channel == false)
- return;
-
memset(&props, 0, sizeof(struct vmstorage_channel_properties));
- vmbus_open(new_sc,
- storvsc_ringbuffer_size,
- storvsc_ringbuffer_size,
- (void *)&props,
- sizeof(struct vmstorage_channel_properties),
- storvsc_on_channel_callback, new_sc);
+ ret = vmbus_open(new_sc,
+ storvsc_ringbuffer_size,
+ storvsc_ringbuffer_size,
+ (void *)&props,
+ sizeof(struct vmstorage_channel_properties),
+ storvsc_on_channel_callback, new_sc);
- if (new_sc->state == CHANNEL_OPENED_STATE) {
- stor_device->stor_chns[new_sc->target_cpu] = new_sc;
- cpumask_set_cpu(new_sc->target_cpu, &stor_device->alloced_cpus);
+ /* In case vmbus_open() fails, we don't use the sub-channel. */
+ if (ret != 0) {
+ dev_err(dev, "Failed to open sub-channel: err=%d\n", ret);
+ return;
}
+
+ /* Add the sub-channel to the array of available channels. */
+ stor_device->stor_chns[new_sc->target_cpu] = new_sc;
+ cpumask_set_cpu(new_sc->target_cpu, &stor_device->alloced_cpus);
}
static void handle_multichannel_storage(struct hv_device *device, int max_chns)
{
+ struct device *dev = &device->device;
struct storvsc_device *stor_device;
int num_cpus = num_online_cpus();
int num_sc;
@@ -679,21 +683,11 @@ static void handle_multichannel_storage(struct hv_device *device, int max_chns)
request = &stor_device->init_request;
vstor_packet = &request->vstor_packet;
- stor_device->open_sub_channel = true;
/*
* Establish a handler for dealing with subchannels.
*/
vmbus_set_sc_create_callback(device->channel, handle_sc_creation);
- /*
- * Check to see if sub-channels have already been created. This
- * can happen when this driver is re-loaded after unloading.
- */
-
- if (vmbus_are_subchannels_present(device->channel))
- return;
-
- stor_device->open_sub_channel = false;
/*
* Request the host to create sub-channels.
*/
@@ -710,23 +704,29 @@ static void handle_multichannel_storage(struct hv_device *device, int max_chns)
VM_PKT_DATA_INBAND,
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
- if (ret != 0)
+ if (ret != 0) {
+ dev_err(dev, "Failed to create sub-channel: err=%d\n", ret);
return;
+ }
t = wait_for_completion_timeout(&request->wait_event, 10*HZ);
- if (t == 0)
+ if (t == 0) {
+ dev_err(dev, "Failed to create sub-channel: timed out\n");
return;
+ }
if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
- vstor_packet->status != 0)
+ vstor_packet->status != 0) {
+ dev_err(dev, "Failed to create sub-channel: op=%d, sts=%d\n",
+ vstor_packet->operation, vstor_packet->status);
return;
+ }
/*
- * Now that we created the sub-channels, invoke the check; this
- * may trigger the callback.
+ * We need to do nothing here, because vmbus_process_offer()
+ * invokes channel->sc_creation_callback, which will open and use
+ * the sub-channel(s).
*/
- stor_device->open_sub_channel = true;
- vmbus_are_subchannels_present(device->channel);
}
static void cache_wwn(struct storvsc_device *stor_device,
@@ -1794,7 +1794,6 @@ static int storvsc_probe(struct hv_device *device,
}
stor_device->destroy = false;
- stor_device->open_sub_channel = false;
init_waitqueue_head(&stor_device->waiting_to_drain);
stor_device->device = device;
stor_device->host = host;