From: Ahmad Fatoum <a.fatoum@pengutronix.de>
Date: Fri, 21 Sep 2018 11:32:53 +0200
Subject: mtd: spi-nor: fsl-quadspi: Don't let -EINVAL on the bus
Git-commit: 000412276370a9bcfec73b3752ceefd9a927f1db
Patch-mainline: v4.20-rc1
References: git-fixes,fate#326530,fate#326531,fate#326535,fate#326538,fate#326539
fsl_qspi_get_seqid() may return -EINVAL, but fsl_qspi_init_ahb_read()
doesn't check for error codes with the result that -EINVAL could find
itself signalled over the bus.
In conjunction with the LS1046A SoC's A-009283 errata
("Illegal accesses to SPI flash memory can result in a system hang")
this illegal access to SPI flash memory results in a system hang
if userspace attempts reading later on.
Avoid this by always checking fsl_qspi_get_seqid()'s return value
and bail out otherwise.
Fixes: e46ecda764dc ("mtd: spi-nor: Add Freescale QuadSPI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
drivers/mtd/spi-nor/fsl-quadspi.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -533,6 +533,9 @@ fsl_qspi_runcmd(struct fsl_qspi *q, u8 c
/* trigger the LUT now */
seqid = fsl_qspi_get_seqid(q, cmd);
+ if (seqid < 0)
+ return seqid;
+
qspi_writel(q, (seqid << QUADSPI_IPCR_SEQID_SHIFT) | len,
base + QUADSPI_IPCR);
@@ -661,7 +664,7 @@ static void fsl_qspi_set_map_addr(struct
* causes the controller to clear the buffer, and use the sequence pointed
* by the QUADSPI_BFGENCR[SEQID] to initiate a read from the flash.
*/
-static void fsl_qspi_init_ahb_read(struct fsl_qspi *q)
+static int fsl_qspi_init_ahb_read(struct fsl_qspi *q)
{
void __iomem *base = q->iobase;
int seqid;
@@ -686,8 +689,13 @@ static void fsl_qspi_init_ahb_read(struc
/* Set the default lut sequence for AHB Read. */
seqid = fsl_qspi_get_seqid(q, q->nor[0].read_opcode);
+ if (seqid < 0)
+ return seqid;
+
qspi_writel(q, seqid << QUADSPI_BFGENCR_SEQID_SHIFT,
q->iobase + QUADSPI_BFGENCR);
+
+ return 0;
}
/* This function was used to prepare and enable QSPI clock */
@@ -794,9 +802,7 @@ static int fsl_qspi_nor_setup_last(struc
fsl_qspi_init_lut(q);
/* Init for AHB read */
- fsl_qspi_init_ahb_read(q);
-
- return 0;
+ return fsl_qspi_init_ahb_read(q);
}
static const struct of_device_id fsl_qspi_dt_ids[] = {