From: Tariq Toukan <tariqt@mellanox.com>
Date: Thu, 28 Dec 2017 16:26:10 +0200
Subject: net/mlx4_core: Cleanup FMR unmapping flow
Patch-mainline: v4.16-rc1
Git-commit: fd4a3e2828b4ca35aef40e5bdc1ed7d87b3cb50a
References: bsc#1046300 FATE#322946

Remove redundant and not essential operations in fmr unmap/free.
According to device spec, in FMR unmap it is sufficient to set
ownership bit to SW. This allows remapping afterwards.

Fixes: 8ad11fb6b073 ("IB/mlx4: Implement FMRs")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
 drivers/net/ethernet/mellanox/mlx4/mr.c |   40 ++++++++++++++++----------------
 1 file changed, 21 insertions(+), 19 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx4/mr.c
+++ b/drivers/net/ethernet/mellanox/mlx4/mr.c
@@ -1103,30 +1103,16 @@ EXPORT_SYMBOL_GPL(mlx4_fmr_enable);
 void mlx4_fmr_unmap(struct mlx4_dev *dev, struct mlx4_fmr *fmr,
 		    u32 *lkey, u32 *rkey)
 {
-	struct mlx4_cmd_mailbox *mailbox;
-	int err;
-
 	if (!fmr->maps)
 		return;
 
-	fmr->maps = 0;
+	/* To unmap: it is sufficient to take back ownership from HW */
+	*(u8 *)fmr->mpt = MLX4_MPT_STATUS_SW;
 
-	mailbox = mlx4_alloc_cmd_mailbox(dev);
-	if (IS_ERR(mailbox)) {
-		err = PTR_ERR(mailbox);
-		pr_warn("mlx4_ib: mlx4_alloc_cmd_mailbox failed (%d)\n", err);
-		return;
-	}
+	/* Make sure MPT status is visible */
+	wmb();
 
-	err = mlx4_HW2SW_MPT(dev, NULL,
-			     key_to_hw_index(fmr->mr.key) &
-			     (dev->caps.num_mpts - 1));
-	mlx4_free_cmd_mailbox(dev, mailbox);
-	if (err) {
-		pr_warn("mlx4_ib: mlx4_HW2SW_MPT failed (%d)\n", err);
-		return;
-	}
-	fmr->mr.enabled = MLX4_MPT_EN_SW;
+	fmr->maps = 0;
 }
 EXPORT_SYMBOL_GPL(mlx4_fmr_unmap);
 
@@ -1136,6 +1122,22 @@ int mlx4_fmr_free(struct mlx4_dev *dev,
 
 	if (fmr->maps)
 		return -EBUSY;
+	if (fmr->mr.enabled == MLX4_MPT_EN_HW) {
+		/* In case of FMR was enabled and unmapped
+		 * make sure to give ownership of MPT back to HW
+		 * so HW2SW_MPT command will success.
+		 */
+		*(u8 *)fmr->mpt = MLX4_MPT_STATUS_SW;
+		/* Make sure MPT status is visible before changing MPT fields */
+		wmb();
+		fmr->mpt->length = 0;
+		fmr->mpt->start  = 0;
+		/* Make sure MPT data is visible after changing MPT status */
+		wmb();
+		*(u8 *)fmr->mpt = MLX4_MPT_STATUS_HW;
+		/* make sure MPT status is visible */
+		wmb();
+	}
 
 	ret = mlx4_mr_free(dev, &fmr->mr);
 	if (ret)