From: Colin Ian King <colin.king@canonical.com>
Date: Thu, 1 Mar 2018 10:23:03 +0000
Subject: net: phy: Fix spelling mistake: "advertisment"-> "advertisement"
Patch-mainline: v4.17-rc1
Git-commit: cc1122b00d624ef551b6ff92e57240cbffb7d62a
References: bsc#1119113 FATE#326472
Trivial fix to spelling mistake in comments and error message text.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
drivers/net/phy/bcm7xxx.c | 2 +-
drivers/net/phy/marvell.c | 2 +-
drivers/net/phy/marvell10g.c | 2 +-
drivers/net/phy/phy-c45.c | 8 ++++----
drivers/net/phy/phy-core.c | 4 ++--
drivers/net/phy/phylink.c | 12 ++++++------
6 files changed, 15 insertions(+), 15 deletions(-)
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -565,7 +565,7 @@ static int bcm7xxx_28nm_set_tunable(stru
if (ret)
return ret;
- /* Disable EEE advertisment since this prevents the PHY
+ /* Disable EEE advertisement since this prevents the PHY
* from successfully linking up, trigger auto-negotiation restart
* to let the MAC decide what to do.
*/
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -852,7 +852,7 @@ static int m88e1510_config_init(struct p
return err;
/* There appears to be a bug in the 88e1512 when used in
- * SGMII to copper mode, where the AN advertisment register
+ * SGMII to copper mode, where the AN advertisement register
* clears the pause bits each time a negotiation occurs.
* This means we can never be truely sure what was advertised,
* so disable Pause support.
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -308,7 +308,7 @@ static int mv3310_read_status(struct phy
if (val < 0)
return val;
- /* Read the link partner's 1G advertisment */
+ /* Read the link partner's 1G advertisement */
val = phy_read_mmd(phydev, MDIO_MMD_AN, MV_AN_STAT1000);
if (val < 0)
return val;
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -163,11 +163,11 @@ int genphy_c45_read_link(struct phy_devi
EXPORT_SYMBOL_GPL(genphy_c45_read_link);
/**
- * genphy_c45_read_lpa - read the link partner advertisment and pause
+ * genphy_c45_read_lpa - read the link partner advertisement and pause
* @phydev: target phy_device struct
*
* Read the Clause 45 defined base (7.19) and 10G (7.33) status registers,
- * filling in the link partner advertisment, pause and asym_pause members
+ * filling in the link partner advertisement, pause and asym_pause members
* in @phydev. This assumes that the auto-negotiation MMD is present, and
* the backplane bit (7.48.0) is clear. Clause 45 PHY drivers are expected
* to fill in the remainder of the link partner advert from vendor registers.
@@ -176,7 +176,7 @@ int genphy_c45_read_lpa(struct phy_devic
{
int val;
- /* Read the link partner's base page advertisment */
+ /* Read the link partner's base page advertisement */
val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA);
if (val < 0)
return val;
@@ -185,7 +185,7 @@ int genphy_c45_read_lpa(struct phy_devic
phydev->pause = val & LPA_PAUSE_CAP ? 1 : 0;
phydev->asym_pause = val & LPA_PAUSE_ASYM ? 1 : 0;
- /* Read the link partner's 10G advertisment */
+ /* Read the link partner's 10G advertisement */
val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT);
if (val < 0)
return val;
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -190,10 +190,10 @@ size_t phy_speeds(unsigned int *speeds,
}
/**
- * phy_resolve_aneg_linkmode - resolve the advertisments into phy settings
+ * phy_resolve_aneg_linkmode - resolve the advertisements into phy settings
* @phydev: The phy_device struct
*
- * Resolve our and the link partner advertisments into their corresponding
+ * Resolve our and the link partner advertisements into their corresponding
* speed and duplex. If full duplex was negotiated, extract the pause mode
* from the link partner mask.
*/
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -364,7 +364,7 @@ static void phylink_get_fixed_state(stru
}
/* Flow control is resolved according to our and the link partners
- * advertisments using the following drawn from the 802.3 specs:
+ * advertisements using the following drawn from the 802.3 specs:
* Local device Link partner
* Pause AsymDir Pause AsymDir Result
* 1 X 1 X TX+RX
@@ -683,7 +683,7 @@ static int phylink_bringup_phy(struct ph
linkmode_copy(pl->supported, supported);
linkmode_copy(pl->link_config.advertising, config.advertising);
- /* Restrict the phy advertisment according to the MAC support. */
+ /* Restrict the phy advertisement according to the MAC support. */
ethtool_convert_link_mode_to_legacy_u32(&advertising, config.advertising);
phy->advertising = advertising;
mutex_unlock(&pl->state_mutex);
@@ -887,7 +887,7 @@ void phylink_start(struct phylink *pl)
/* Apply the link configuration to the MAC when starting. This allows
* a fixed-link to start with the correct parameters, and also
- * ensures that we set the appropriate advertisment for Serdes links.
+ * ensures that we set the appropriate advertisement for Serdes links.
*/
phylink_resolve_flow(pl, &pl->link_config);
phylink_mac_config(pl, &pl->link_config);
@@ -1074,7 +1074,7 @@ int phylink_ethtool_ksettings_set(struct
config = pl->link_config;
- /* Mask out unsupported advertisments */
+ /* Mask out unsupported advertisements */
linkmode_and(config.advertising, kset->link_modes.advertising,
pl->supported);
@@ -1119,7 +1119,7 @@ int phylink_ethtool_ksettings_set(struct
if (phylink_validate(pl, pl->supported, &config))
return -EINVAL;
- /* If autonegotiation is enabled, we must have an advertisment */
+ /* If autonegotiation is enabled, we must have an advertisement */
if (config.an_enabled && phylink_is_empty_linkmode(config.advertising))
return -EINVAL;
@@ -1606,7 +1606,7 @@ static int phylink_sfp_module_insert(voi
iface = sfp_select_interface(pl->sfp_bus, id, config.advertising);
if (iface == PHY_INTERFACE_MODE_NA) {
netdev_err(pl->netdev,
- "selection of interface failed, advertisment %*pb\n",
+ "selection of interface failed, advertisement %*pb\n",
__ETHTOOL_LINK_MODE_MASK_NBITS, config.advertising);
return -EINVAL;
}