From: Heiner Kallweit <hkallweit1@gmail.com>
Date: Thu, 12 Jul 2018 21:32:53 +0200
Subject: net: phy: add phy_speed_down and phy_speed_up
Patch-mainline: v4.19-rc1
Git-commit: 2b9672ddb6f347467d7b33b86c5dfc4d5c0501a8
References: bsc#1119113 FATE#326472

Some network drivers include functionality to speed down the PHY when
suspending and just waiting for a WoL packet because this saves energy.
This functionality is quite generic, therefore let's factor it out to
phylib.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
 drivers/net/phy/phy.c |   78 ++++++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/phy.h   |    2 +
 2 files changed, 80 insertions(+)

--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -551,6 +551,84 @@ int phy_start_aneg(struct phy_device *ph
 }
 EXPORT_SYMBOL(phy_start_aneg);
 
+static int phy_poll_aneg_done(struct phy_device *phydev)
+{
+	unsigned int retries = 100;
+	int ret;
+
+	do {
+		msleep(100);
+		ret = phy_aneg_done(phydev);
+	} while (!ret && --retries);
+
+	if (!ret)
+		return -ETIMEDOUT;
+
+	return ret < 0 ? ret : 0;
+}
+
+/**
+ * phy_speed_down - set speed to lowest speed supported by both link partners
+ * @phydev: the phy_device struct
+ * @sync: perform action synchronously
+ *
+ * Description: Typically used to save energy when waiting for a WoL packet
+ *
+ * WARNING: Setting sync to false may cause the system being unable to suspend
+ * in case the PHY generates an interrupt when finishing the autonegotiation.
+ * This interrupt may wake up the system immediately after suspend.
+ * Therefore use sync = false only if you're sure it's safe with the respective
+ * network chip.
+ */
+int phy_speed_down(struct phy_device *phydev, bool sync)
+{
+	u32 adv = phydev->lp_advertising & phydev->supported;
+	u32 adv_old = phydev->advertising;
+	int ret;
+
+	if (phydev->autoneg != AUTONEG_ENABLE)
+		return 0;
+
+	if (adv & PHY_10BT_FEATURES)
+		phydev->advertising &= ~(PHY_100BT_FEATURES |
+					 PHY_1000BT_FEATURES);
+	else if (adv & PHY_100BT_FEATURES)
+		phydev->advertising &= ~PHY_1000BT_FEATURES;
+
+	if (phydev->advertising == adv_old)
+		return 0;
+
+	ret = phy_config_aneg(phydev);
+	if (ret)
+		return ret;
+
+	return sync ? phy_poll_aneg_done(phydev) : 0;
+}
+EXPORT_SYMBOL_GPL(phy_speed_down);
+
+/**
+ * phy_speed_up - (re)set advertised speeds to all supported speeds
+ * @phydev: the phy_device struct
+ *
+ * Description: Used to revert the effect of phy_speed_down
+ */
+int phy_speed_up(struct phy_device *phydev)
+{
+	u32 mask = PHY_10BT_FEATURES | PHY_100BT_FEATURES | PHY_1000BT_FEATURES;
+	u32 adv_old = phydev->advertising;
+
+	if (phydev->autoneg != AUTONEG_ENABLE)
+		return 0;
+
+	phydev->advertising = (adv_old & ~mask) | (phydev->supported & mask);
+
+	if (phydev->advertising == adv_old)
+		return 0;
+
+	return phy_config_aneg(phydev);
+}
+EXPORT_SYMBOL_GPL(phy_speed_up);
+
 /**
  * phy_start_machine - start PHY state machine tracking
  * @phydev: the phy_device struct
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -940,6 +940,8 @@ void phy_start(struct phy_device *phydev
 void phy_stop(struct phy_device *phydev);
 int phy_start_aneg(struct phy_device *phydev);
 int phy_aneg_done(struct phy_device *phydev);
+int phy_speed_down(struct phy_device *phydev, bool sync);
+int phy_speed_up(struct phy_device *phydev);
 
 int phy_stop_interrupts(struct phy_device *phydev);
 int phy_restart_aneg(struct phy_device *phydev);