From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Tue, 28 May 2019 10:34:42 +0100
Subject: net: phy: marvell10g: report if the PHY fails to boot firmware
Patch-mainline: v5.2-rc3
Git-commit: 3d3ced2ec5d71b99d72ae6910fbdf890bc2eccf0
References: bsc#1119113 FATE#326472

Some boards do not have the PHY firmware programmed in the 3310's flash,
which leads to the PHY not working as expected.  Warn the user when the
PHY fails to boot the firmware and refuse to initialise.

Fixes: 20b2af32ff3f ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
 drivers/net/phy/marvell10g.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -29,6 +29,9 @@
 #define MDIO_AN_10GBT_CTRL_ADV_NBT_MASK	0x01e0
 
 enum {
+	MV_PMA_BOOT		= 0xc050,
+	MV_PMA_BOOT_FATAL	= BIT(0),
+
 	MV_PCS_BASE_T		= 0x0000,
 	MV_PCS_BASE_R		= 0x1000,
 	MV_PCS_1000BASEX	= 0x2000,
@@ -228,6 +231,16 @@ static int mv3310_probe(struct phy_devic
 	    (phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask)
 		return -ENODEV;
 
+	ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_BOOT);
+	if (ret < 0)
+		return ret;
+
+	if (ret & MV_PMA_BOOT_FATAL) {
+		dev_warn(&phydev->mdio.dev,
+			 "PHY failed to boot firmware, status=%04x\n", ret);
+		return -ENODEV;
+	}
+
 	priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;