From 746ba11f170603bf1eaade817553a6c2e9135bbe Mon Sep 17 00:00:00 2001
From: Vijayakumar Durai <vijayakumar.durai1@vivint.com>
Date: Wed, 27 Mar 2019 11:03:17 +0100
Subject: [PATCH] rt2x00: do not increment sequence number while re-transmitting
Git-commit: 746ba11f170603bf1eaade817553a6c2e9135bbe
Patch-mainline: v5.1-rc6
References: bsc#1051510
Currently rt2x00 devices retransmit the management frames with
incremented sequence number if hardware is assigning the sequence.
This is HW bug fixed already for non-QOS data frames, but it should
be fixed for management frames except beacon.
Without fix retransmitted frames have wrong SN:
AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1648, FN=0, Flags=........C Frame is not being retransmitted 1648 1
AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1649, FN=0, Flags=....R...C Frame is being retransmitted 1649 1
AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1650, FN=0, Flags=....R...C Frame is being retransmitted 1650 1
With the fix SN stays correctly the same:
88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=........C
88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=....R...C
88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=....R...C
Cc: stable@vger.kernel.org
Signed-off-by: Vijayakumar Durai <vijayakumar.durai1@vivint.com>
[sgruszka: simplify code, change comments and changelog]
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
---
drivers/net/wireless/ralink/rt2x00/rt2x00.h | 1 -
drivers/net/wireless/ralink/rt2x00/rt2x00mac.c | 10 ----------
drivers/net/wireless/ralink/rt2x00/rt2x00queue.c | 15 +++++++++------
3 files changed, 9 insertions(+), 17 deletions(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00.h b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
index 4b1744e9fb78..50b92ca92bd7 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -673,7 +673,6 @@ enum rt2x00_state_flags {
CONFIG_CHANNEL_HT40,
CONFIG_POWERSAVING,
CONFIG_HT_DISABLED,
- CONFIG_QOS_DISABLED,
CONFIG_MONITORING,
/*
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c b/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c
index 2825560e2424..e8462f25d252 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c
@@ -642,18 +642,8 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
rt2x00dev->intf_associated--;
rt2x00leds_led_assoc(rt2x00dev, !!rt2x00dev->intf_associated);
-
- clear_bit(CONFIG_QOS_DISABLED, &rt2x00dev->flags);
}
- /*
- * Check for access point which do not support 802.11e . We have to
- * generate data frames sequence number in S/W for such AP, because
- * of H/W bug.
- */
- if (changes & BSS_CHANGED_QOS && !bss_conf->qos)
- set_bit(CONFIG_QOS_DISABLED, &rt2x00dev->flags);
-
/*
* When the erp information has changed, we should perform
* additional configuration steps. For all other changes we are done.
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
index 92ddc19e7bf7..4834b4eb0206 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
@@ -201,15 +201,18 @@ static void rt2x00queue_create_tx_descriptor_seq(struct rt2x00_dev *rt2x00dev,
if (!rt2x00_has_cap_flag(rt2x00dev, REQUIRE_SW_SEQNO)) {
/*
* rt2800 has a H/W (or F/W) bug, device incorrectly increase
- * seqno on retransmited data (non-QOS) frames. To workaround
- * the problem let's generate seqno in software if QOS is
- * disabled.
+ * seqno on retransmitted data (non-QOS) and management frames.
+ * To workaround the problem let's generate seqno in software.
+ * Except for beacons which are transmitted periodically by H/W
+ * hence hardware has to assign seqno for them.
*/
- if (test_bit(CONFIG_QOS_DISABLED, &rt2x00dev->flags))
- __clear_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
- else
+ if (ieee80211_is_beacon(hdr->frame_control)) {
+ __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
/* H/W will generate sequence number */
return;
+ }
+
+ __clear_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
}
/*
--
2.16.4