From 3aa592154fe0cdb997713722e17dd7a9b87a3ae0 Mon Sep 17 00:00:00 2001
From: Tao Ren <taoren@fb.com>
Date: Mon, 5 Nov 2018 14:35:40 -0800
Subject: [PATCH 01/10] net: phy: Allow BCM54616S PHY to setup internal TX/RX
clock delay
Git-commit: 042cb56478152b31c50bea8a784fc826891eb38e
References: git-fixes
Patch-mainline: v4.20-rc2
This patch allows users to enable/disable internal TX and/or RX clock
delay for BCM54616S PHYs so as to satisfy RGMII timing specifications.
On a particular platform, whether TX and/or RX clock delay is required
depends on how PHY connected to the MAC IP. This requirement can be
specified through "phy-mode" property in the platform device tree.
The patch is inspired by commit 733336262b28 ("net: phy: Allow BCM5481x
PHYs to setup internal TX/RX clock delay").
Signed-off-by: Tao Ren <taoren@fb.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Denis Kirjanov <denis.kirjanov@suse.com>
---
drivers/net/phy/broadcom.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index a8f69c5777bc..1af5d73bcd44 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -80,7 +80,7 @@ static int bcm54612e_config_init(struct phy_device *phydev)
return 0;
}
-static int bcm5481x_config(struct phy_device *phydev)
+static int bcm54xx_config_clock_delay(struct phy_device *phydev)
{
int rc, val;
@@ -417,7 +417,7 @@ static int bcm5481_config_aneg(struct phy_device *phydev)
ret = genphy_config_aneg(phydev);
/* Then we can set up the delay. */
- bcm5481x_config(phydev);
+ bcm54xx_config_clock_delay(phydev);
if (of_property_read_bool(np, "enet-phy-lane-swap")) {
/* Lane Swap - Undocumented register...magic! */
@@ -430,6 +430,19 @@ static int bcm5481_config_aneg(struct phy_device *phydev)
return ret;
}
+static int bcm54616s_config_aneg(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Aneg firsly. */
+ ret = genphy_config_aneg(phydev);
+
+ /* Then we can set up the delay. */
+ bcm54xx_config_clock_delay(phydev);
+
+ return ret;
+}
+
static int brcm_phy_setbits(struct phy_device *phydev, int reg, int set)
{
int val;
@@ -593,6 +606,7 @@ static struct phy_driver broadcom_drivers[] = {
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = bcm54xx_config_init,
+ .config_aneg = bcm54616s_config_aneg,
.ack_interrupt = bcm_phy_ack_intr,
.config_intr = bcm_phy_config_intr,
}, {
--
2.16.4