From: Cameron Gutman <aicommander@gmail.com>
Date: Thu, 31 Aug 2017 11:52:20 -0700
Subject: [PATCH] Input: xpad - fix PowerA init quirk for some gamepad models
References: bnc#1060662
Patch-mainline: v4.12.11
Git-commit: f5308d1b83eba20e69df5e0926ba7257c8dd9074
commit f5308d1b83eba20e69df5e0926ba7257c8dd9074 upstream.
The PowerA gamepad initialization quirk worked with the PowerA
wired gamepad I had around (0x24c6:0x543a), but a user reported [0]
that it didn't work for him, even though our gamepads shared the
same vendor and product IDs.
When I initially implemented the PowerA quirk, I wanted to avoid
actually triggering the rumble action during init. My tests showed
that my gamepad would work correctly even if it received a rumble
of 0 intensity, so that's what I went with.
Unfortunately, this apparently isn't true for all models (perhaps
a firmware difference?). This non-working gamepad seems to require
the real magic rumble packet that the Microsoft driver sends, which
actually vibrates the gamepad. To counteract this effect, I still
send the old zero-rumble PowerA quirk packet which cancels the
rumble effect before the motors can spin up enough to vibrate.
[0]: https://github.com/paroj/xpad/issues/48#issuecomment-313904867
Reported-by: Kyle Beauchamp <kyleabeauchamp@gmail.com>
Tested-by: Kyle Beauchamp <kyleabeauchamp@gmail.com>
Fixes: 81093c9848a7 ("Input: xpad - support some quirky Xbox One pads")
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/input/joystick/xpad.c | 24 +++++++++++++++++++-----
1 file changed, 19 insertions(+), 5 deletions(-)
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index def96cd2479b..68894f7ccb54 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -389,10 +389,21 @@ static const u8 xboxone_hori_init[] = {
};
/*
- * A rumble packet is required for some PowerA pads to start
+ * A specific rumble packet is required for some PowerA pads to start
* sending input reports. One of those pads is (0x24c6:0x543a).
*/
-static const u8 xboxone_zerorumble_init[] = {
+static const u8 xboxone_rumblebegin_init[] = {
+ 0x09, 0x00, 0x00, 0x09, 0x00, 0x0F, 0x00, 0x00,
+ 0x1D, 0x1D, 0xFF, 0x00, 0x00
+};
+
+/*
+ * A rumble packet with zero FF intensity will immediately
+ * terminate the rumbling required to init PowerA pads.
+ * This should happen fast enough that the motors don't
+ * spin up to enough speed to actually vibrate the gamepad.
+ */
+static const u8 xboxone_rumbleend_init[] = {
0x09, 0x00, 0x00, 0x09, 0x00, 0x0F, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00
};
@@ -407,9 +418,12 @@ static const struct xboxone_init_packet xboxone_init_packets[] = {
XBOXONE_INIT_PKT(0x0e6f, 0x0165, xboxone_hori_init),
XBOXONE_INIT_PKT(0x0f0d, 0x0067, xboxone_hori_init),
XBOXONE_INIT_PKT(0x0000, 0x0000, xboxone_fw2015_init),
- XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_zerorumble_init),
- XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_zerorumble_init),
- XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_zerorumble_init),
+ XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumblebegin_init),
+ XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumblebegin_init),
+ XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumblebegin_init),
+ XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumbleend_init),
+ XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumbleend_init),
+ XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumbleend_init),
};
struct xpad_output_packet {
--
2.14.2