From 54578ee883e34d2d1c518d48f1c1e2dd3f387188 Mon Sep 17 00:00:00 2001
From: Bin Liu <b-liu@ti.com>
Date: Tue, 18 Dec 2018 07:58:05 -0600
Subject: [PATCH] usb: musb: dsps: fix runtime pm for peripheral mode
Git-commit: 54578ee883e34d2d1c518d48f1c1e2dd3f387188
Patch-mainline: v5.0-rc1
References: bsc#1120902

Since the runtime PM support was added in musb, dsps relies on the timer
calling otg_timer() to activate the usb subsystem. However the driver
doesn't enable the timer for peripheral port, then the peripheral port is
unable to be enumerated by a host if the other usb port is disabled or in
peripheral mode too.

So let's start the timer for peripheral port too.

Fixes: ea2f35c01d5e ("usb: musb: Fix sleeping function called from invalid context for hdrc glue")
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
---
 drivers/usb/musb/musb_dsps.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -196,9 +196,11 @@ static void dsps_musb_enable(struct musb
 
 	musb_writel(reg_base, wrp->epintr_set, epmask);
 	musb_writel(reg_base, wrp->coreintr_set, coremask);
-	/* start polling for ID change in dual-role idle mode */
-	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
-			musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
+	/*
+	 * start polling for runtime PM active and idle,
+	 * and for ID change in dual-role idle mode.
+	 */
+	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE)
 		dsps_mod_timer(glue, -1);
 }
 
@@ -269,6 +271,10 @@ static int dsps_check_status(struct musb
 				musb->xceiv->otg->state = OTG_STATE_A_IDLE;
 				MUSB_HST_MODE(musb);
 			}
+
+			if (musb->port_mode == MUSB_PERIPHERAL)
+				skip_session = 1;
+
 			if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session)
 				musb_writeb(mregs, MUSB_DEVCTL,
 					    MUSB_DEVCTL_SESSION);