From ad9c9405762e38ab7f2e7bec5ee5d9a591574e5d Mon Sep 17 00:00:00 2001
From: Corey Minyard <cminyard@mvista.com>
Date: Thu, 8 Mar 2018 15:00:28 -0600
Subject: [PATCH 04/20] ipmi: Remove ACPI SPMI probing from the SSIF (I2C)
driver
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Git-commit: 4866b1dce0389013a268f0ab63f7229b30c6e5fe
Patch-mainline: v4.17-rc1
References: bsc#1105907
The IPMI spec states:
The purpose of the SPMI Table is to provide a mechanism that can
be used by the OSPM (an ACPI term for “OS Operating System-directed
configuration and Power Management” essentially meaning an ACPI-aware
OS or OS loader) very early in the boot process, e.g., before the
ability to execute ACPI control methods in the OS is available.
When we are probing IPMI in Linux, ACPI control methods are available,
so we shouldn't be probing using SPMI. It could cause some confusion
during the probing process.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Jiandi An <anjiandi@codeaurora.org>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com>
---
drivers/char/ipmi/ipmi_ssif.c | 105 ------------------------------------------
1 file changed, 105 deletions(-)
diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c
index 6f2eaba1cd6a..5449922e8952 100644
--- a/drivers/char/ipmi/ipmi_ssif.c
+++ b/drivers/char/ipmi/ipmi_ssif.c
@@ -1846,108 +1846,6 @@ static const struct acpi_device_id ssif_acpi_match[] = {
{ },
};
MODULE_DEVICE_TABLE(acpi, ssif_acpi_match);
-
-/*
- * Once we get an ACPI failure, we don't try any more, because we go
- * through the tables sequentially. Once we don't find a table, there
- * are no more.
- */
-static int acpi_failure;
-
-/*
- * Defined in the IPMI 2.0 spec.
- */
-struct SPMITable {
- s8 Signature[4];
- u32 Length;
- u8 Revision;
- u8 Checksum;
- s8 OEMID[6];
- s8 OEMTableID[8];
- s8 OEMRevision[4];
- s8 CreatorID[4];
- s8 CreatorRevision[4];
- u8 InterfaceType;
- u8 IPMIlegacy;
- s16 SpecificationRevision;
-
- /*
- * Bit 0 - SCI interrupt supported
- * Bit 1 - I/O APIC/SAPIC
- */
- u8 InterruptType;
-
- /*
- * If bit 0 of InterruptType is set, then this is the SCI
- * interrupt in the GPEx_STS register.
- */
- u8 GPE;
-
- s16 Reserved;
-
- /*
- * If bit 1 of InterruptType is set, then this is the I/O
- * APIC/SAPIC interrupt.
- */
- u32 GlobalSystemInterrupt;
-
- /* The actual register address. */
- struct acpi_generic_address addr;
-
- u8 UID[4];
-
- s8 spmi_id[1]; /* A '\0' terminated array starts here. */
-};
-
-static int try_init_spmi(struct SPMITable *spmi)
-{
- unsigned short myaddr;
-
- if (num_addrs >= MAX_SSIF_BMCS)
- return -1;
-
- if (spmi->IPMIlegacy != 1) {
- pr_warn("IPMI: Bad SPMI legacy: %d\n", spmi->IPMIlegacy);
- return -ENODEV;
- }
-
- if (spmi->InterfaceType != 4)
- return -ENODEV;
-
- if (spmi->addr.space_id != ACPI_ADR_SPACE_SMBUS) {
- pr_warn(PFX "Invalid ACPI SSIF I/O Address type: %d\n",
- spmi->addr.space_id);
- return -EIO;
- }
-
- myaddr = spmi->addr.address & 0x7f;
-
- return new_ssif_client(myaddr, NULL, 0, 0, SI_SPMI, NULL);
-}
-
-static void spmi_find_bmc(void)
-{
- acpi_status status;
- struct SPMITable *spmi;
- int i;
-
- if (acpi_disabled)
- return;
-
- if (acpi_failure)
- return;
-
- for (i = 0; ; i++) {
- status = acpi_get_table(ACPI_SIG_SPMI, i+1,
- (struct acpi_table_header **)&spmi);
- if (status != AE_OK)
- return;
-
- try_init_spmi(spmi);
- }
-}
-#else
-static void spmi_find_bmc(void) { }
#endif
#ifdef CONFIG_DMI
@@ -2060,9 +1958,6 @@ static int init_ipmi_ssif(void)
ssif_i2c_driver.driver.acpi_match_table =
ACPI_PTR(ssif_acpi_match);
- if (ssif_tryacpi)
- spmi_find_bmc();
-
if (ssif_trydmi) {
rv = platform_driver_register(&ipmi_driver);
if (rv)
--
2.11.0