From 5d0e3c2cb096b3d28a77609b7900d5bcd784bae0 Mon Sep 17 00:00:00 2001
From: James Morse <james.morse@arm.com>
Date: Thu, 18 Nov 2021 14:59:00 +0100
Subject: [PATCH 11/22] arm64: entry: Add vectors that have the bhb mitigation
sequences
Git-commit: ba2689234be92024e5635d30fe744f4853ad97db
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git
Patch-mainline: Queued in a subsystem tree
References: bsc#1191580 CVE-2022-0001 CVE-2022-000 CVE-2022-23960
Some CPUs affected by Spectre-BHB need a sequence of branches, or a
firmware call to be run before any indirect branch. This needs to go
in the vectors. No CPU needs both.
While this can be patched in, it would run on all CPUs as there is a
single set of vectors. If only one part of a big/little combination is
affected, the unaffected CPUs have to run the mitigation too.
Create extra vectors that include the sequence. Subsequent patches will
allow affected CPUs to select this set of vectors. Later patches will
modify the loop count to match what the CPU requires.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
---
arch/arm64/include/asm/assembler.h | 25 ++++++++++++++
arch/arm64/include/asm/vectors.h | 34 +++++++++++++++++++
arch/arm64/kernel/entry.S | 53 +++++++++++++++++++++++++-----
include/linux/arm-smccc.h | 7 ++++
4 files changed, 110 insertions(+), 9 deletions(-)
create mode 100644 arch/arm64/include/asm/vectors.h
diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
index 057cd725824d1..5c50a5df8f6e9 100644
--- a/arch/arm64/include/asm/assembler.h
+++ b/arch/arm64/include/asm/assembler.h
@@ -574,4 +574,29 @@ USER(\label, ic ivau, \tmp2) // invalidate I line PoU
#endif
.endm
+ .macro __mitigate_spectre_bhb_loop tmp
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+ mov \tmp, #32
+.Lspectre_bhb_loop\@:
+ b . + 4
+ subs \tmp, \tmp, #1
+ b.ne .Lspectre_bhb_loop\@
+ dsb nsh
+ isb
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+ .endm
+
+ /* Save/restores x0-x3 to the stack */
+ .macro __mitigate_spectre_bhb_fw
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+ stp x0, x1, [sp, #-16]!
+ stp x2, x3, [sp, #-16]!
+ mov w0, #ARM_SMCCC_ARCH_WORKAROUND_3
+alternative_cb arm64_update_smccc_conduit
+ nop // Patched to SMC/HVC #0
+alternative_cb_end
+ ldp x2, x3, [sp], #16
+ ldp x0, x1, [sp], #16
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+ .endm
#endif /* __ASM_ASSEMBLER_H */
diff --git a/arch/arm64/include/asm/vectors.h b/arch/arm64/include/asm/vectors.h
new file mode 100644
index 0000000000000..bac53fad037dc
--- /dev/null
+++ b/arch/arm64/include/asm/vectors.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2022 ARM Ltd.
+ */
+#ifndef __ASM_VECTORS_H
+#define __ASM_VECTORS_H
+
+/*
+ * Note: the order of this enum corresponds to two arrays in entry.S:
+ * tramp_vecs and __bp_harden_el1_vectors. By default the canonical
+ * 'full fat' vectors are used directly.
+ */
+enum arm64_bp_harden_el1_vectors {
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+ /*
+ * Perform the BHB loop mitigation, before branching to the canonical
+ * vectors.
+ */
+ EL1_VECTOR_BHB_LOOP,
+
+ /*
+ * Make the SMC call for firmware mitigation, before branching to the
+ * canonical vectors.
+ */
+ EL1_VECTOR_BHB_FW,
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+
+ /*
+ * Remap the kernel before branching to the canonical vectors.
+ */
+ EL1_VECTOR_KPTI,
++};
+
+#endif /* __ASM_VECTORS_H */
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 53a1ca9faec55..b02d149d30cda 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -1097,13 +1097,26 @@ alternative_else_nop_endif
sub \dst, \dst, PAGE_SIZE
.endm
- .macro tramp_ventry, vector_start, regsize, kpti
+
+#define BHB_MITIGATION_NONE 0
+#define BHB_MITIGATION_LOOP 1
+#define BHB_MITIGATION_FW 2
+
+ .macro tramp_ventry, vector_start, regsize, kpti, bhb
.align 7
1:
.if \regsize == 64
msr tpidrro_el0, x30 // Restored in kernel_ventry
.endif
+ .if \bhb == BHB_MITIGATION_LOOP
+ /*
+ * This sequence must appear before the first indirect branch. i.e. the
+ * ret out of tramp_ventry. It appears here because x30 is free.
+ */
+ __mitigate_spectre_bhb_loop x30
+ .endif // \bhb == BHB_MITIGATION_LOOP
+
.if \kpti == 1
/*
* Defend against branch aliasing attacks by pushing a dummy
@@ -1128,6 +1141,15 @@ alternative_insn isb, nop, ARM64_WORKAROUND_QCOM_FALKOR_E1003
ldr x30, =vectors
.endif // \kpti == 1
+ .if \bhb == BHB_MITIGATION_FW
+ /*
+ * The firmware sequence must appear before the first indirect branch.
+ * i.e. the ret out of tramp_ventry. But it also needs the stack to be
+ * mapped to save/restore the registers the SMC clobbers.
+ */
+ __mitigate_spectre_bhb_fw
+ .endif // \bhb == BHB_MITIGATION_FW
+
add x30, x30, #(1b - \vector_start + 4)
ret
.org 1b + 128 // Did we overflow the ventry slot?
@@ -1135,6 +1157,9 @@ alternative_insn isb, nop, ARM64_WORKAROUND_QCOM_FALKOR_E1003
.macro tramp_exit, regsize = 64
adr x30, tramp_vectors
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+ add x30, x30, SZ_4K
+#endif
msr vbar_el1, x30
ldr lr, [sp, #S_LR]
tramp_unmap_kernel x29
@@ -1145,26 +1170,32 @@ alternative_insn isb, nop, ARM64_WORKAROUND_QCOM_FALKOR_E1003
eret
.endm
- .macro generate_tramp_vector, kpti
+ .macro generate_tramp_vector, kpti, bhb
.Lvector_start\@:
.space 0x400
.rept 4
- tramp_ventry .Lvector_start\@, 64, \kpti
+ tramp_ventry .Lvector_start\@, 64, \kpti, \bhb
.endr
.rept 4
- tramp_ventry .Lvector_start\@, 32, \kpti
+ tramp_ventry .Lvector_start\@, 32, \kpti, \bhb
.endr
.endm
#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
/*
* Exception vectors trampoline.
+ * The order must match __bp_harden_el1_vectors and the
+ * arm64_bp_harden_el1_vectors enum.
*/
.pushsection ".entry.tramp.text", "ax"
.align 11
ENTRY(tramp_vectors)
- generate_tramp_vector kpti=1
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+ generate_tramp_vector kpti=1, bhb=BHB_MITIGATION_LOOP
+ generate_tramp_vector kpti=1, bhb=BHB_MITIGATION_FW
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+ generate_tramp_vector kpti=1, bhb=BHB_MITIGATION_NONE
END(tramp_vectors)
ENTRY(tramp_exit_native)
@@ -1191,7 +1222,7 @@ __entry_tramp_data_start:
* Exception vectors for spectre mitigations on entry from EL1 when
* kpti is not in use.
*/
- .macro generate_el1_vector
+ .macro generate_el1_vector, bhb
.Lvector_start\@:
kernel_ventry 1, sync_invalid // Synchronous EL1t
kernel_ventry 1, irq_invalid // IRQ EL1t
@@ -1204,17 +1235,21 @@ __entry_tramp_data_start:
kernel_ventry 1, error_invalid // Error EL1h
.rept 4
- tramp_ventry .Lvector_start\@, 64, kpti=0
+ tramp_ventry .Lvector_start\@, 64, 0, \bhb
.endr
.rept 4
- tramp_ventry .Lvector_start\@, 32, kpti=0
+ tramp_ventry .Lvector_start\@, 32, 0, \bhb
.endr
.endm
+/* The order must match tramp_vecs and the arm64_bp_harden_el1_vectors enum. */
.pushsection ".entry.text", "ax"
.align 11
ENTRY(__bp_harden_el1_vectors)
- generate_el1_vector
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+ generate_el1_vector bhb=BHB_MITIGATION_LOOP
+ generate_el1_vector bhb=BHB_MITIGATION_FW
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
END(__bp_harden_el1_vectors)
.popsection
diff --git a/include/linux/arm-smccc.h b/include/linux/arm-smccc.h
index ca1d2cc2cdfa0..6f354ab0e8755 100644
--- a/include/linux/arm-smccc.h
+++ b/include/linux/arm-smccc.h
@@ -85,6 +85,13 @@
ARM_SMCCC_SMC_32, \
0, 0x7fff)
+#define ARM_SMCCC_ARCH_WORKAROUND_3 \
+ ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, \
+ ARM_SMCCC_SMC_32, \
+ 0, 0x3fff)
+
+#define SMCCC_ARCH_WORKAROUND_RET_UNAFFECTED 1
+
#ifndef __ASSEMBLY__
#include <linux/linkage.h>
--
2.34.1