From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 17 Feb 2017 12:30:07 +0200
Subject: drm/omap: remove ovl_set_channel_out
Git-commit: 49a3057a5a2fa06264b0756cf417f75b56b7063b
Patch-mainline: v4.13-rc1
References: FATE#326289 FATE#326079 FATE#326049 FATE#322398 FATE#326166

At the moment we have ovl_set_channel_out() to configure the output
channel of an overlay. It makes sense to have this configuration as part
of the rest of overlay configuration, and in DSS6+ we need the output
channel when doing the other overlay configuration.

This patch adds a 'channel' parameter to ovl_setup(), so that all
overlay configuration is done via the same function, and removes the
ovl_set_channel_out().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Petr Tesarik <ptesarik@suse.com>
---
 drivers/gpu/drm/omapdrm/dss/dispc.c   |   13 ++++++-------
 drivers/gpu/drm/omapdrm/dss/omapdss.h |    5 ++---
 drivers/gpu/drm/omapdrm/omap_plane.c  |    6 ++----
 3 files changed, 10 insertions(+), 14 deletions(-)

--- a/drivers/gpu/drm/omapdrm/dss/dispc.c
+++ b/drivers/gpu/drm/omapdrm/dss/dispc.c
@@ -2834,21 +2834,21 @@ static int dispc_ovl_setup_common(enum o
 
 static int dispc_ovl_setup(enum omap_plane_id plane,
 		const struct omap_overlay_info *oi,
-		const struct videomode *vm, bool mem_to_mem)
+		const struct videomode *vm, bool mem_to_mem,
+		enum omap_channel channel)
 {
 	int r;
 	enum omap_overlay_caps caps = dss_feat_get_overlay_caps(plane);
-	enum omap_channel channel;
 	const bool replication = true;
 
-	channel = dispc_ovl_get_channel_out(plane);
-
 	DSSDBG("dispc_ovl_setup %d, pa %pad, pa_uv %pad, sw %d, %d,%d, %dx%d ->"
 		" %dx%d, cmode %x, rot %d, mir %d, chan %d repl %d\n",
 		plane, &oi->paddr, &oi->p_uv_addr, oi->screen_width, oi->pos_x,
 		oi->pos_y, oi->width, oi->height, oi->out_width, oi->out_height,
 		oi->color_mode, oi->rotation, oi->mirror, channel, replication);
 
+	dispc_ovl_set_channel_out(plane, channel);
+
 	r = dispc_ovl_setup_common(plane, caps, oi->paddr, oi->p_uv_addr,
 		oi->screen_width, oi->pos_x, oi->pos_y, oi->width, oi->height,
 		oi->out_width, oi->out_height, oi->color_mode, oi->rotation,
@@ -4304,8 +4304,8 @@ static void dispc_errata_i734_wa(void)
 	REG_FLD_MOD(DISPC_CONFIG, 0x1f, 8, 4);
 
 	/* Setup and enable GFX plane */
-	dispc_ovl_set_channel_out(OMAP_DSS_GFX, OMAP_DSS_CHANNEL_LCD);
-	dispc_ovl_setup(OMAP_DSS_GFX, &ovli, &i734.vm, false);
+	dispc_ovl_setup(OMAP_DSS_GFX, &ovli, &i734.vm, false,
+		OMAP_DSS_CHANNEL_LCD);
 	dispc_ovl_enable(OMAP_DSS_GFX, true);
 
 	/* Set up and enable display manager for LCD1 */
@@ -4372,7 +4372,6 @@ static const struct dispc_ops dispc_ops
 	.mgr_set_gamma = dispc_mgr_set_gamma,
 
 	.ovl_enable = dispc_ovl_enable,
-	.ovl_set_channel_out = dispc_ovl_set_channel_out,
 	.ovl_setup = dispc_ovl_setup,
 	.ovl_get_color_modes = dispc_ovl_get_color_modes,
 };
--- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
@@ -912,11 +912,10 @@ struct dispc_ops {
 		unsigned int length);
 
 	int (*ovl_enable)(enum omap_plane_id plane, bool enable);
-	void (*ovl_set_channel_out)(enum omap_plane_id plane,
-			enum omap_channel channel);
 	int (*ovl_setup)(enum omap_plane_id plane,
 			 const struct omap_overlay_info *oi,
-			const struct videomode *vm, bool mem_to_mem);
+			const struct videomode *vm, bool mem_to_mem,
+			enum omap_channel channel);
 
 	enum omap_color_mode (*ovl_get_color_modes)(enum omap_plane_id plane);
 };
--- a/drivers/gpu/drm/omapdrm/omap_plane.c
+++ b/drivers/gpu/drm/omapdrm/omap_plane.c
@@ -105,12 +105,10 @@ static void omap_plane_atomic_update(str
 	DBG("%d,%d %pad %pad", info.pos_x, info.pos_y,
 			&info.paddr, &info.p_uv_addr);
 
-	priv->dispc_ops->ovl_set_channel_out(omap_plane->id,
-				  omap_crtc_channel(state->crtc));
-
 	/* and finally, update omapdss: */
 	ret = priv->dispc_ops->ovl_setup(omap_plane->id, &info,
-			      omap_crtc_timings(state->crtc), false);
+			      omap_crtc_timings(state->crtc), false,
+			      omap_crtc_channel(state->crtc));
 	if (ret) {
 		dev_err(plane->dev->dev, "Failed to setup plane %s\n",
 			omap_plane->name);