From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Tue, 21 Nov 2017 09:17:43 +0100
Subject: drm/bridge: adv7511/33: Fix adv7511_cec_init() failure handling
Git-commit: 1b6fba458c0a2e8513071330972c4c587b7d28cc
Patch-mainline: v4.15-rc2
References: FATE#326289 FATE#326079 FATE#326049 FATE#322398 FATE#326166
If the device tree for a board did not specify a cec clock, then
adv7511_cec_init would return an error, which would cause adv7511_probe()
to fail and thus there is no HDMI output.
There is no need to have adv7511_probe() fail if the CEC initialization
fails, so just change adv7511_cec_init() to a void function. In addition,
adv7511_cec_init() should just return silently if the cec clock isn't
found and show a message for any other errors.
An otherwise correct cleanup patch from Dan Carpenter turned this broken
failure handling into a kernel Oops, so bisection points to commit
7af35b0addbc ("drm/kirin: Checking for IS_ERR() instead of NULL") rather
than 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support").
Based on earlier patches from Arnd and John.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: https://bugs.linaro.org/show_bug.cgi?id=3345
Link: https://lkft.validation.linaro.org/scheduler/job/48017#L3551
Fixes: 7af35b0addbc ("drm/kirin: Checking for IS_ERR() instead of NULL")
Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/9097b2a4-b6b9-5fca-e039-0a17694b1143@xs4all.nl
Acked-by: Petr Tesarik <ptesarik@suse.com>
---
drivers/gpu/drm/bridge/adv7511/adv7511.h | 13 +++++++++-
drivers/gpu/drm/bridge/adv7511/adv7511_cec.c | 32 ++++++++++++++++++---------
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 17 +++-----------
3 files changed, 37 insertions(+), 25 deletions(-)
--- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
@@ -372,9 +372,18 @@ struct adv7511 {
};
#ifdef CONFIG_DRM_I2C_ADV7511_CEC
-int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511,
- unsigned int offset);
+int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511);
void adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1);
+#else
+static inline int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
+{
+ unsigned int offset = adv7511->type == ADV7533 ?
+ ADV7533_REG_CEC_OFFSET : 0;
+
+ regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset,
+ ADV7511_CEC_CTRL_POWER_DOWN);
+ return 0;
+}
#endif
#ifdef CONFIG_DRM_I2C_ADV7533
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
@@ -300,18 +300,21 @@ static int adv7511_cec_parse_dt(struct d
return 0;
}
-int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511,
- unsigned int offset)
+int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
{
+ unsigned int offset = adv7511->type == ADV7533 ?
+ ADV7533_REG_CEC_OFFSET : 0;
int ret = adv7511_cec_parse_dt(dev, adv7511);
if (ret)
- return ret;
+ goto err_cec_parse_dt;
adv7511->cec_adap = cec_allocate_adapter(&adv7511_cec_adap_ops,
adv7511, dev_name(dev), CEC_CAP_DEFAULTS, ADV7511_MAX_ADDRS);
- if (IS_ERR(adv7511->cec_adap))
- return PTR_ERR(adv7511->cec_adap);
+ if (IS_ERR(adv7511->cec_adap)) {
+ ret = PTR_ERR(adv7511->cec_adap);
+ goto err_cec_alloc;
+ }
regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset, 0);
/* cec soft reset */
@@ -329,9 +332,18 @@ int adv7511_cec_init(struct device *dev,
((adv7511->cec_clk_freq / 750000) - 1) << 2);
ret = cec_register_adapter(adv7511->cec_adap, dev);
- if (ret) {
- cec_delete_adapter(adv7511->cec_adap);
- adv7511->cec_adap = NULL;
- }
- return ret;
+ if (ret)
+ goto err_cec_register;
+ return 0;
+
+err_cec_register:
+ cec_delete_adapter(adv7511->cec_adap);
+ adv7511->cec_adap = NULL;
+err_cec_alloc:
+ dev_info(dev, "Initializing CEC failed with error %d, disabling CEC\n",
+ ret);
+err_cec_parse_dt:
+ regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset,
+ ADV7511_CEC_CTRL_POWER_DOWN);
+ return ret == -EPROBE_DEFER ? ret : 0;
}
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -1084,7 +1084,6 @@ static int adv7511_probe(struct i2c_clie
struct device *dev = &i2c->dev;
unsigned int main_i2c_addr = i2c->addr << 1;
unsigned int edid_i2c_addr = main_i2c_addr + 4;
- unsigned int offset;
unsigned int val;
int ret;
@@ -1192,24 +1191,16 @@ static int adv7511_probe(struct i2c_clie
if (adv7511->type == ADV7511)
adv7511_set_link_config(adv7511, &link_config);
+ ret = adv7511_cec_init(dev, adv7511);
+ if (ret)
+ goto err_unregister_cec;
+
adv7511->bridge.funcs = &adv7511_bridge_funcs;
adv7511->bridge.of_node = dev->of_node;
drm_bridge_add(&adv7511->bridge);
adv7511_audio_init(dev, adv7511);
-
- offset = adv7511->type == ADV7533 ? ADV7533_REG_CEC_OFFSET : 0;
-
-#ifdef CONFIG_DRM_I2C_ADV7511_CEC
- ret = adv7511_cec_init(dev, adv7511, offset);
- if (ret)
- goto err_unregister_cec;
-#else
- regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset,
- ADV7511_CEC_CTRL_POWER_DOWN);
-#endif
-
return 0;
err_unregister_cec: