From: Manasi Navare <manasi.d.navare@intel.com>
Date: Fri, 23 Mar 2018 10:24:14 -0700
Subject: drm/i915/icl: Add Combo PHY DDI Buffer translation tables for Icelake.
Git-commit: 19b904f8df5c6c1418769de35bf238ef72e49814
Patch-mainline: v4.18-rc1
References: FATE#326289 FATE#326079 FATE#326049 FATE#322398 FATE#326166
These tables are used on voltage vswing sequence initialization on
Icelake.
The swing_sel on the spec's table is defined in a 4 bits binary like
1010. However the register bits are split in upper 1 bit swing_sel
and lower 3 bits swing sel.
In this table here we store this value as a single value in hex like
it is mentioned in the Bspec and split it to the upper and lower bit
values only while programming the registers.
For instance: b1010 is written as 0xA and then while writing to the
register, the upper 1 bit is obtained by (0xA & 0x8) and shifting by
appropriate bits while lower 3 bits are obtained by (0xA & 0x7) and
shifting by appropriate bits.
Some of the columns need to be updated after the spec is updated.
v5 (from Paulo):
* Checkpatch fixes.
v4 (from Paulo):
* Fix minor typo
* Coding style conformance
v3:
* Get rid of HDMI/DVI tables, same as DP (Paulo)
* Use combo_phy in ddi buf trans table defs (Paulo)
v2:
* Added DW4_scaling_hex column to the translation tables (Rodrigo)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180323172419.24911-3-paulo.r.zanoni@intel.com
Acked-by: Petr Tesarik <ptesarik@suse.com>
---
drivers/gpu/drm/i915/intel_ddi.c | 99 +++++++++++++++++++++++++++++++++++++++
1 file changed, 99 insertions(+)
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -493,6 +493,105 @@ static const struct cnl_ddi_buf_trans cn
{ 0x2, 0x7F, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */
};
+struct icl_combo_phy_ddi_buf_trans {
+ u32 dw2_swing_select;
+ u32 dw2_swing_scalar;
+ u32 dw4_scaling;
+};
+
+/* Voltage Swing Programming for VccIO 0.85V for DP */
+static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hdmi_0_85V[] = {
+ /* Voltage mV db */
+ { 0x2, 0x98, 0x0018 }, /* 400 0.0 */
+ { 0x2, 0x98, 0x3015 }, /* 400 3.5 */
+ { 0x2, 0x98, 0x6012 }, /* 400 6.0 */
+ { 0x2, 0x98, 0x900F }, /* 400 9.5 */
+ { 0xB, 0x70, 0x0018 }, /* 600 0.0 */
+ { 0xB, 0x70, 0x3015 }, /* 600 3.5 */
+ { 0xB, 0x70, 0x6012 }, /* 600 6.0 */
+ { 0x5, 0x00, 0x0018 }, /* 800 0.0 */
+ { 0x5, 0x00, 0x3015 }, /* 800 3.5 */
+ { 0x6, 0x98, 0x0018 }, /* 1200 0.0 */
+};
+
+/* FIXME - After table is updated in Bspec */
+/* Voltage Swing Programming for VccIO 0.85V for eDP */
+static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_edp_0_85V[] = {
+ /* Voltage mV db */
+ { 0x0, 0x00, 0x00 }, /* 200 0.0 */
+ { 0x0, 0x00, 0x00 }, /* 200 1.5 */
+ { 0x0, 0x00, 0x00 }, /* 200 4.0 */
+ { 0x0, 0x00, 0x00 }, /* 200 6.0 */
+ { 0x0, 0x00, 0x00 }, /* 250 0.0 */
+ { 0x0, 0x00, 0x00 }, /* 250 1.5 */
+ { 0x0, 0x00, 0x00 }, /* 250 4.0 */
+ { 0x0, 0x00, 0x00 }, /* 300 0.0 */
+ { 0x0, 0x00, 0x00 }, /* 300 1.5 */
+ { 0x0, 0x00, 0x00 }, /* 350 0.0 */
+};
+
+/* Voltage Swing Programming for VccIO 0.95V for DP */
+static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hdmi_0_95V[] = {
+ /* Voltage mV db */
+ { 0x2, 0x98, 0x0018 }, /* 400 0.0 */
+ { 0x2, 0x98, 0x3015 }, /* 400 3.5 */
+ { 0x2, 0x98, 0x6012 }, /* 400 6.0 */
+ { 0x2, 0x98, 0x900F }, /* 400 9.5 */
+ { 0x4, 0x98, 0x0018 }, /* 600 0.0 */
+ { 0x4, 0x98, 0x3015 }, /* 600 3.5 */
+ { 0x4, 0x98, 0x6012 }, /* 600 6.0 */
+ { 0x5, 0x76, 0x0018 }, /* 800 0.0 */
+ { 0x5, 0x76, 0x3015 }, /* 800 3.5 */
+ { 0x6, 0x98, 0x0018 }, /* 1200 0.0 */
+};
+
+/* FIXME - After table is updated in Bspec */
+/* Voltage Swing Programming for VccIO 0.95V for eDP */
+static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_edp_0_95V[] = {
+ /* Voltage mV db */
+ { 0x0, 0x00, 0x00 }, /* 200 0.0 */
+ { 0x0, 0x00, 0x00 }, /* 200 1.5 */
+ { 0x0, 0x00, 0x00 }, /* 200 4.0 */
+ { 0x0, 0x00, 0x00 }, /* 200 6.0 */
+ { 0x0, 0x00, 0x00 }, /* 250 0.0 */
+ { 0x0, 0x00, 0x00 }, /* 250 1.5 */
+ { 0x0, 0x00, 0x00 }, /* 250 4.0 */
+ { 0x0, 0x00, 0x00 }, /* 300 0.0 */
+ { 0x0, 0x00, 0x00 }, /* 300 1.5 */
+ { 0x0, 0x00, 0x00 }, /* 350 0.0 */
+};
+
+/* Voltage Swing Programming for VccIO 1.05V for DP */
+static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hdmi_1_05V[] = {
+ /* Voltage mV db */
+ { 0x2, 0x98, 0x0018 }, /* 400 0.0 */
+ { 0x2, 0x98, 0x3015 }, /* 400 3.5 */
+ { 0x2, 0x98, 0x6012 }, /* 400 6.0 */
+ { 0x2, 0x98, 0x900F }, /* 400 9.5 */
+ { 0x4, 0x98, 0x0018 }, /* 600 0.0 */
+ { 0x4, 0x98, 0x3015 }, /* 600 3.5 */
+ { 0x4, 0x98, 0x6012 }, /* 600 6.0 */
+ { 0x5, 0x71, 0x0018 }, /* 800 0.0 */
+ { 0x5, 0x71, 0x3015 }, /* 800 3.5 */
+ { 0x6, 0x98, 0x0018 }, /* 1200 0.0 */
+};
+
+/* FIXME - After table is updated in Bspec */
+/* Voltage Swing Programming for VccIO 1.05V for eDP */
+static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_edp_1_05V[] = {
+ /* Voltage mV db */
+ { 0x0, 0x00, 0x00 }, /* 200 0.0 */
+ { 0x0, 0x00, 0x00 }, /* 200 1.5 */
+ { 0x0, 0x00, 0x00 }, /* 200 4.0 */
+ { 0x0, 0x00, 0x00 }, /* 200 6.0 */
+ { 0x0, 0x00, 0x00 }, /* 250 0.0 */
+ { 0x0, 0x00, 0x00 }, /* 250 1.5 */
+ { 0x0, 0x00, 0x00 }, /* 250 4.0 */
+ { 0x0, 0x00, 0x00 }, /* 300 0.0 */
+ { 0x0, 0x00, 0x00 }, /* 300 1.5 */
+ { 0x0, 0x00, 0x00 }, /* 350 0.0 */
+};
+
static const struct ddi_buf_trans *
bdw_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries)
{