From a1208f6a822ac29933e772ef1f637c5d67838da9 Mon Sep 17 00:00:00 2001
From: Chris Cole <chris@sageembedded.com>
Date: Fri, 23 Nov 2018 12:20:45 +0100
Subject: [PATCH] ARM: 8814/1: mm: improve/fix ARM v7_dma_inv_range() unaligned address handling
Git-commit: a1208f6a822ac29933e772ef1f637c5d67838da9
Patch-mainline: v4.20-rc6
References: bsc#1051510
This patch addresses possible memory corruption when
v7_dma_inv_range(start_address, end_address) address parameters are not
aligned to whole cache lines. This function issues "invalidate" cache
management operations to all cache lines from start_address (inclusive)
to end_address (exclusive). When start_address and/or end_address are
not aligned, the start and/or end cache lines are first issued "clean &
invalidate" operation. The assumption is this is done to ensure that any
dirty data addresses outside the address range (but part of the first or
last cache lines) are cleaned/flushed so that data is not lost, which
could happen if just an invalidate is issued.
The problem is that these first/last partial cache lines are issued
"clean & invalidate" and then "invalidate". This second "invalidate" is
not required and worse can cause "lost" writes to addresses outside the
address range but part of the cache line. If another component writes to
its part of the cache line between the "clean & invalidate" and
"invalidate" operations, the write can get lost. This fix is to remove
the extra "invalidate" operation when unaligned addressed are used.
A kernel module is available that has a stress test to reproduce the
issue and a unit test of the updated v7_dma_inv_range(). It can be
downloaded from
http://ftp.sageembedded.com/outgoing/linux/cache-test-20181107.tgz.
v7_dma_inv_range() is call by dmac_[un]map_area(addr, len, direction)
when the direction is DMA_FROM_DEVICE. One can (I believe) successfully
argue that DMA from a device to main memory should use buffers aligned
to cache line size, because the "clean & invalidate" might overwrite
data that the device just wrote using DMA. But if a driver does use
unaligned buffers, at least this fix will prevent memory corruption
outside the buffer.
Signed-off-by: Chris Cole <chris@sageembedded.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Takashi Iwai <tiwai@suse.de>
---
arch/arm/mm/cache-v7.S | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 215df435bfb9..2149b47a0c5a 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -360,14 +360,16 @@ v7_dma_inv_range:
ALT_UP(W(nop))
#endif
mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line
+ addne r0, r0, r2
tst r1, r3
bic r1, r1, r3
mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D / U line
-1:
- mcr p15, 0, r0, c7, c6, 1 @ invalidate D / U line
- add r0, r0, r2
cmp r0, r1
+1:
+ mcrlo p15, 0, r0, c7, c6, 1 @ invalidate D / U line
+ addlo r0, r0, r2
+ cmplo r0, r1
blo 1b
dsb st
ret lr
--
2.16.4