From 91b228107da3e41558449a62cd93816b47b3b4b5 Mon Sep 17 00:00:00 2001
From: Rushikesh S Kadam <rushikesh.s.kadam@intel.com>
Date: Tue, 2 Apr 2019 11:17:41 +0530
Subject: [PATCH] HID: intel-ish-hid: ISH firmware loader client driver
Git-commit: 91b228107da3e41558449a62cd93816b47b3b4b5
Patch-mainline: v5.2-rc1
References: jsc#SLE-5241
This driver adds support for loading Intel Integrated Sensor Hub (ISH) firmware
from host file system to ISH SRAM and start execution.
At power-on, the ISH subsystem shall boot to an interim Shim loader-firmware,
which shall expose an ISHTP loader device.
The driver implements an ISHTP client that communicates with the Shim ISHTP
loader device over the intel-ish-hid stack, to download the main ISH firmware.
Signed-off-by: Rushikesh S Kadam <rushikesh.s.kadam@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Nick Crews <ncrews@chromium.org>
Tested-by: Jett Rink <jettrink@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Takashi Iwai <tiwai@suse.de>
---
drivers/hid/Makefile | 1 +
drivers/hid/intel-ish-hid/Kconfig | 15 +
drivers/hid/intel-ish-hid/Makefile | 3 +
drivers/hid/intel-ish-hid/ishtp-fw-loader.c | 1085 +++++++++++++++++++++++++++
4 files changed, 1104 insertions(+)
create mode 100644 drivers/hid/intel-ish-hid/ishtp-fw-loader.c
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 170163b41303..d8d393e7a1f9 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -134,3 +134,4 @@ obj-$(CONFIG_USB_KBD) += usbhid/
obj-$(CONFIG_I2C_HID) += i2c-hid/
obj-$(CONFIG_INTEL_ISH_HID) += intel-ish-hid/
+obj-$(INTEL_ISH_FIRMWARE_DOWNLOADER) += intel-ish-hid/
diff --git a/drivers/hid/intel-ish-hid/Kconfig b/drivers/hid/intel-ish-hid/Kconfig
index 519e4c8b53c4..786adbc97ac5 100644
--- a/drivers/hid/intel-ish-hid/Kconfig
+++ b/drivers/hid/intel-ish-hid/Kconfig
@@ -14,4 +14,19 @@ config INTEL_ISH_HID
Broxton and Kaby Lake.
Say Y here if you want to support Intel ISH. If unsure, say N.
+
+config INTEL_ISH_FIRMWARE_DOWNLOADER
+ tristate "Host Firmware Load feature for Intel ISH"
+ depends on INTEL_ISH_HID
+ depends on X86
+ help
+ The Integrated Sensor Hub (ISH) enables the kernel to offload
+ sensor polling and algorithm processing to a dedicated low power
+ processor in the chipset.
+
+ The Host Firmware Load feature adds support to load the ISH
+ firmware from host file system at boot.
+
+ Say M here if you want to support Host Firmware Loading feature
+ for Intel ISH. If unsure, say N.
endmenu
diff --git a/drivers/hid/intel-ish-hid/Makefile b/drivers/hid/intel-ish-hid/Makefile
index 825b70af672f..2de97e4b7740 100644
--- a/drivers/hid/intel-ish-hid/Makefile
+++ b/drivers/hid/intel-ish-hid/Makefile
@@ -20,4 +20,7 @@ obj-$(CONFIG_INTEL_ISH_HID) += intel-ishtp-hid.o
intel-ishtp-hid-objs := ishtp-hid.o
intel-ishtp-hid-objs += ishtp-hid-client.o
+obj-$(CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER) += intel-ishtp-loader.o
+intel-ishtp-loader-objs += ishtp-fw-loader.o
+
ccflags-y += -Idrivers/hid/intel-ish-hid/ishtp
diff --git a/drivers/hid/intel-ish-hid/ishtp-fw-loader.c b/drivers/hid/intel-ish-hid/ishtp-fw-loader.c
new file mode 100644
index 000000000000..e770e220bd73
--- /dev/null
+++ b/drivers/hid/intel-ish-hid/ishtp-fw-loader.c
@@ -0,0 +1,1085 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ISH-TP client driver for ISH firmware loading
+ *
+ * Copyright (c) 2019, Intel Corporation.
+ */
+
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/intel-ish-client-if.h>
+#include <linux/property.h>
+#include <asm/cacheflush.h>
+
+/* Number of times we attempt to load the firmware before giving up */
+#define MAX_LOAD_ATTEMPTS 3
+
+/* ISH TX/RX ring buffer pool size */
+#define LOADER_CL_RX_RING_SIZE 1
+#define LOADER_CL_TX_RING_SIZE 1
+
+/*
+ * ISH Shim firmware loader reserves 4 Kb buffer in SRAM. The buffer is
+ * used to temporarily hold the data transferred from host to Shim
+ * firmware loader. Reason for the odd size of 3968 bytes? Each IPC
+ * transfer is 128 bytes (= 4 bytes header + 124 bytes payload). So the
+ * 4 Kb buffer can hold maximum of 32 IPC transfers, which means we can
+ * have a max payload of 3968 bytes (= 32 x 124 payload).
+ */
+#define LOADER_SHIM_IPC_BUF_SIZE 3968
+
+/**
+ * enum ish_loader_commands - ISH loader host commands.
+ * LOADER_CMD_XFER_QUERY Query the Shim firmware loader for
+ * capabilities
+ * LOADER_CMD_XFER_FRAGMENT Transfer one firmware image fragment at a
+ * time. The command may be executed
+ * multiple times until the entire firmware
+ * image is downloaded to SRAM.
+ * LOADER_CMD_START Start executing the main firmware.
+ */
+enum ish_loader_commands {
+ LOADER_CMD_XFER_QUERY = 0,
+ LOADER_CMD_XFER_FRAGMENT,
+ LOADER_CMD_START,
+};
+
+/* Command bit mask */
+#define CMD_MASK GENMASK(6, 0)
+#define IS_RESPONSE BIT(7)
+
+/*
+ * ISH firmware max delay for one transmit failure is 1 Hz,
+ * and firmware will retry 2 times, so 3 Hz is used for timeout.
+ */
+#define ISHTP_SEND_TIMEOUT (3 * HZ)
+
+/*
+ * Loader transfer modes:
+ *
+ * LOADER_XFER_MODE_ISHTP mode uses the existing ISH-TP mechanism to
+ * transfer data. This may use IPC or DMA if supported in firmware.
+ * The buffer size is limited to 4 Kb by the IPC/ISH-TP protocol for
+ * both IPC & DMA (legacy).
+ *
+ * LOADER_XFER_MODE_DIRECT_DMA - firmware loading is a bit different
+ * from the sensor data streaming. Here we download a large (300+ Kb)
+ * image directly to ISH SRAM memory. There is limited benefit of
+ * DMA'ing 300 Kb image in 4 Kb chucks limit. Hence, we introduce
+ * this "direct dma" mode, where we do not use ISH-TP for DMA, but
+ * instead manage the DMA directly in kernel driver and Shim firmware
+ * loader (allocate buffer, break in chucks and transfer). This allows
+ * to overcome 4 Kb limit, and optimize the data flow path in firmware.
+ */
+#define LOADER_XFER_MODE_DIRECT_DMA BIT(0)
+#define LOADER_XFER_MODE_ISHTP BIT(1)
+
+/* ISH Transport Loader client unique GUID */
+static const guid_t loader_ishtp_guid =
+ GUID_INIT(0xc804d06a, 0x55bd, 0x4ea7,
+ 0xad, 0xed, 0x1e, 0x31, 0x22, 0x8c, 0x76, 0xdc);
+
+#define FILENAME_SIZE 256
+
+/*
+ * The firmware loading latency will be minimum if we can DMA the
+ * entire ISH firmware image in one go. This requires that we allocate
+ * a large DMA buffer in kernel, which could be problematic on some
+ * platforms. So here we limit the DMA buffer size via a module_param.
+ * We default to 4 pages, but a customer can set it to higher limit if
+ * deemed appropriate for his platform.
+ */
+static int dma_buf_size_limit = 4 * PAGE_SIZE;
+
+/**
+ * struct loader_msg_hdr - Header for ISH Loader commands.
+ * @command: LOADER_CMD* commands. Bit 7 is the response.
+ * @status: Command response status. Non 0, is error
+ * condition.
+ *
+ * This structure is used as header for every command/data sent/received
+ * between Host driver and ISH Shim firmware loader.
+ */
+struct loader_msg_hdr {
+ u8 command;
+ u8 reserved[2];
+ u8 status;
+} __packed;
+
+struct loader_xfer_query {
+ struct loader_msg_hdr hdr;
+ u32 image_size;
+} __packed;
+
+struct ish_fw_version {
+ u16 major;
+ u16 minor;
+ u16 hotfix;
+ u16 build;
+} __packed;
+
+union loader_version {
+ u32 value;
+ struct {
+ u8 major;
+ u8 minor;
+ u8 hotfix;
+ u8 build;
+ };
+} __packed;
+
+struct loader_capability {
+ u32 max_fw_image_size;
+ u32 xfer_mode;
+ u32 max_dma_buf_size; /* only for dma mode, multiples of cacheline */
+} __packed;
+
+struct shim_fw_info {
+ struct ish_fw_version ish_fw_version;
+ u32 protocol_version;
+ union loader_version ldr_version;
+ struct loader_capability ldr_capability;
+} __packed;
+
+struct loader_xfer_query_response {
+ struct loader_msg_hdr hdr;
+ struct shim_fw_info fw_info;
+} __packed;
+
+struct loader_xfer_fragment {
+ struct loader_msg_hdr hdr;
+ u32 xfer_mode;
+ u32 offset;
+ u32 size;
+ u32 is_last;
+} __packed;
+
+struct loader_xfer_ipc_fragment {
+ struct loader_xfer_fragment fragment;
+ u8 data[] ____cacheline_aligned; /* variable length payload here */
+} __packed;
+
+struct loader_xfer_dma_fragment {
+ struct loader_xfer_fragment fragment;
+ u64 ddr_phys_addr;
+} __packed;
+
+struct loader_start {
+ struct loader_msg_hdr hdr;
+} __packed;
+
+/**
+ * struct response_info - Encapsulate firmware response related
+ * information for passing between function
+ * loader_cl_send() and process_recv() callback.
+ * @data Copy the data received from firmware here.
+ * @max_size Max size allocated for the @data buffer. If the
+ * received data exceeds this value, we log an
+ * error.
+ * @size Actual size of data received from firmware.
+ * @error Returns 0 for success, negative error code for a
+ * failure in function process_recv().
+ * @received Set to true on receiving a valid firmware
+ * response to host command
+ * @wait_queue Wait queue for Host firmware loading where the
+ * client sends message to ISH firmware and waits
+ * for response
+ */
+struct response_info {
+ void *data;
+ size_t max_size;
+ size_t size;
+ int error;
+ bool received;
+ wait_queue_head_t wait_queue;
+};
+
+/**
+ * struct ishtp_cl_data - Encapsulate per ISH-TP Client Data.
+ * @work_ishtp_reset: Work queue for reset handling.
+ * @work_fw_load: Work queue for host firmware loading.
+ * @flag_retry Flag for indicating host firmware loading should
+ * be retried.
+ * @retry_count Count the number of retries.
+ *
+ * This structure is used to store data per client.
+ */
+struct ishtp_cl_data {
+ struct ishtp_cl *loader_ishtp_cl;
+ struct ishtp_cl_device *cl_device;
+
+ /*
+ * Used for passing firmware response information between
+ * loader_cl_send() and process_recv() callback.
+ */
+ struct response_info response;
+
+ struct work_struct work_ishtp_reset;
+ struct work_struct work_fw_load;
+
+ /*
+ * In certain failure scenrios, it makes sense to reset the ISH
+ * subsystem and retry Host firmware loading (e.g. bad message
+ * packet, ENOMEM, etc.). On the other hand, failures due to
+ * protocol mismatch, etc., are not recoverable. We do not
+ * retry them.
+ *
+ * If set, the flag indicates that we should re-try the
+ * particular failure.
+ */
+ bool flag_retry;
+ int retry_count;
+};
+
+#define IPC_FRAGMENT_DATA_PREAMBLE \
+ offsetof(struct loader_xfer_ipc_fragment, data)
+
+#define cl_data_to_dev(client_data) ishtp_device((client_data)->cl_device)
+
+/**
+ * get_firmware_variant() - Gets the filename of firmware image to be
+ * loaded based on platform variant.
+ * @client_data Client data instance.
+ * @filename Returns firmware filename.
+ *
+ * Queries the firmware-name device property string.
+ *
+ * Return: 0 for success, negative error code for failure.
+ */
+static int get_firmware_variant(struct ishtp_cl_data *client_data,
+ char *filename)
+{
+ int rv;
+ const char *val;
+ struct device *devc = ishtp_get_pci_device(client_data->cl_device);
+
+ rv = device_property_read_string(devc, "firmware-name", &val);
+ if (rv < 0) {
+ dev_err(devc,
+ "Error: ISH firmware-name device property required\n");
+ return rv;
+ }
+ return snprintf(filename, FILENAME_SIZE, "intel/%s", val);
+}
+
+/**
+ * loader_cl_send() Send message from host to firmware
+ * @client_data: Client data instance
+ * @out_msg Message buffer to be sent to firmware
+ * @out_size Size of out going message
+ * @in_msg Message buffer where the incoming data copied.
+ * This buffer is allocated by calling
+ * @in_size Max size of incoming message
+ *
+ * Return: Number of bytes copied in the in_msg on success, negative
+ * error code on failure.
+ */
+static int loader_cl_send(struct ishtp_cl_data *client_data,
+ u8 *out_msg, size_t out_size,
+ u8 *in_msg, size_t in_size)
+{
+ int rv;
+ struct loader_msg_hdr *out_hdr = (struct loader_msg_hdr *)out_msg;
+ struct ishtp_cl *loader_ishtp_cl = client_data->loader_ishtp_cl;
+
+ dev_dbg(cl_data_to_dev(client_data),
+ "%s: command=%02lx is_response=%u status=%02x\n",
+ __func__,
+ out_hdr->command & CMD_MASK,
+ out_hdr->command & IS_RESPONSE ? 1 : 0,
+ out_hdr->status);
+
+ /* Setup in coming buffer & size */
+ client_data->response.data = in_msg;
+ client_data->response.max_size = in_size;
+ client_data->response.error = 0;
+ client_data->response.received = false;
+
+ rv = ishtp_cl_send(loader_ishtp_cl, out_msg, out_size);
+ if (rv < 0) {
+ dev_err(cl_data_to_dev(client_data),
+ "ishtp_cl_send error %d\n", rv);
+ return rv;
+ }
+
+ wait_event_interruptible_timeout(client_data->response.wait_queue,
+ client_data->response.received,
+ ISHTP_SEND_TIMEOUT);
+ if (!client_data->response.received) {
+ dev_err(cl_data_to_dev(client_data),
+ "Timed out for response to command=%02lx",
+ out_hdr->command & CMD_MASK);
+ return -ETIMEDOUT;
+ }
+
+ if (client_data->response.error < 0)
+ return client_data->response.error;
+
+ return client_data->response.size;
+}
+
+/**
+ * process_recv() - Receive and parse incoming packet
+ * @loader_ishtp_cl: Client instance to get stats
+ * @rb_in_proc: ISH received message buffer
+ *
+ * Parse the incoming packet. If it is a response packet then it will
+ * update received and wake up the caller waiting to for the response.
+ */
+static void process_recv(struct ishtp_cl *loader_ishtp_cl,
+ struct ishtp_cl_rb *rb_in_proc)
+{
+ struct loader_msg_hdr *hdr;
+ size_t data_len = rb_in_proc->buf_idx;
+ struct ishtp_cl_data *client_data =
+ ishtp_get_client_data(loader_ishtp_cl);
+
+ /* Sanity check */
+ if (!client_data->response.data) {
+ dev_err(cl_data_to_dev(client_data),
+ "Receiving buffer is null. Should be allocated by calling function\n");
+ client_data->response.error = -EINVAL;
+ goto end;
+ }
+
+ if (client_data->response.received) {
+ dev_err(cl_data_to_dev(client_data),
+ "Previous firmware message not yet processed\n");
+ client_data->response.error = -EINVAL;
+ goto end;
+ }
+ /*
+ * All firmware messages have a header. Check buffer size
+ * before accessing elements inside.
+ */
+ if (!rb_in_proc->buffer.data) {
+ dev_warn(cl_data_to_dev(client_data),
+ "rb_in_proc->buffer.data returned null");
+ client_data->response.error = -EBADMSG;
+ goto end;
+ }
+
+ if (data_len < sizeof(struct loader_msg_hdr)) {
+ dev_err(cl_data_to_dev(client_data),
+ "data size %zu is less than header %zu\n",
+ data_len, sizeof(struct loader_msg_hdr));
+ client_data->response.error = -EMSGSIZE;
+ goto end;
+ }
+
+ hdr = (struct loader_msg_hdr *)rb_in_proc->buffer.data;
+
+ dev_dbg(cl_data_to_dev(client_data),
+ "%s: command=%02lx is_response=%u status=%02x\n",
+ __func__,
+ hdr->command & CMD_MASK,
+ hdr->command & IS_RESPONSE ? 1 : 0,
+ hdr->status);
+
+ if (((hdr->command & CMD_MASK) != LOADER_CMD_XFER_QUERY) &&
+ ((hdr->command & CMD_MASK) != LOADER_CMD_XFER_FRAGMENT) &&
+ ((hdr->command & CMD_MASK) != LOADER_CMD_START)) {
+ dev_err(cl_data_to_dev(client_data),
+ "Invalid command=%02lx\n",
+ hdr->command & CMD_MASK);
+ client_data->response.error = -EPROTO;
+ goto end;
+ }
+
+ if (data_len > client_data->response.max_size) {
+ dev_err(cl_data_to_dev(client_data),
+ "Received buffer size %zu is larger than allocated buffer %zu\n",
+ data_len, client_data->response.max_size);
+ client_data->response.error = -EMSGSIZE;
+ goto end;
+ }
+
+ /* We expect only "response" messages from firmware */
+ if (!(hdr->command & IS_RESPONSE)) {
+ dev_err(cl_data_to_dev(client_data),
+ "Invalid response to command\n");
+ client_data->response.error = -EIO;
+ goto end;
+ }
+
+ if (hdr->status) {
+ dev_err(cl_data_to_dev(client_data),
+ "Loader returned status %d\n",
+ hdr->status);
+ client_data->response.error = -EIO;
+ goto end;
+ }
+
+ /* Update the actual received buffer size */
+ client_data->response.size = data_len;
+
+ /*
+ * Copy the buffer received in firmware response for the
+ * calling thread.
+ */
+ memcpy(client_data->response.data,
+ rb_in_proc->buffer.data, data_len);
+
+ /* Set flag before waking up the caller */
+ client_data->response.received = true;
+
+end:
+ /* Free the buffer */
+ ishtp_cl_io_rb_recycle(rb_in_proc);
+ rb_in_proc = NULL;
+
+ /* Wake the calling thread */
+ wake_up_interruptible(&client_data->response.wait_queue);
+}
+
+/**
+ * loader_cl_event_cb() - bus driver callback for incoming message
+ * @device: Pointer to the ishtp client device for which this
+ * message is targeted
+ *
+ * Remove the packet from the list and process the message by calling
+ * process_recv
+ */
+static void loader_cl_event_cb(struct ishtp_cl_device *cl_device)
+{
+ struct ishtp_cl_rb *rb_in_proc;
+ struct ishtp_cl *loader_ishtp_cl = ishtp_get_drvdata(cl_device);
+
+ while ((rb_in_proc = ishtp_cl_rx_get_rb(loader_ishtp_cl)) != NULL) {
+ /* Process the data packet from firmware */
+ process_recv(loader_ishtp_cl, rb_in_proc);
+ }
+}
+
+/**
+ * ish_query_loader_prop() - Query ISH Shim firmware loader
+ * @client_data: Client data instance
+ * @fw: Poiner to firmware data struct in host memory
+ * @fw_info: Loader firmware properties
+ *
+ * This function queries the ISH Shim firmware loader for capabilities.
+ *
+ * Return: 0 for success, negative error code for failure.
+ */
+static int ish_query_loader_prop(struct ishtp_cl_data *client_data,
+ const struct firmware *fw,
+ struct shim_fw_info *fw_info)
+{
+ int rv;
+ struct loader_xfer_query ldr_xfer_query;
+ struct loader_xfer_query_response ldr_xfer_query_resp;
+
+ memset(&ldr_xfer_query, 0, sizeof(ldr_xfer_query));
+ ldr_xfer_query.hdr.command = LOADER_CMD_XFER_QUERY;
+ ldr_xfer_query.image_size = fw->size;
+ rv = loader_cl_send(client_data,
+ (u8 *)&ldr_xfer_query,
+ sizeof(ldr_xfer_query),
+ (u8 *)&ldr_xfer_query_resp,
+ sizeof(ldr_xfer_query_resp));
+ if (rv < 0) {
+ client_data->flag_retry = true;
+ return rv;
+ }
+
+ /* On success, the return value is the received buffer size */
+ if (rv != sizeof(struct loader_xfer_query_response)) {
+ dev_err(cl_data_to_dev(client_data),
+ "data size %d is not equal to size of loader_xfer_query_response %zu\n",
+ rv, sizeof(struct loader_xfer_query_response));
+ client_data->flag_retry = true;
+ return -EMSGSIZE;
+ }
+
+ /* Save fw_info for use outside this function */
+ *fw_info = ldr_xfer_query_resp.fw_info;
+
+ /* Loader firmware properties */
+ dev_dbg(cl_data_to_dev(client_data),
+ "ish_fw_version: major=%d minor=%d hotfix=%d build=%d protocol_version=0x%x loader_version=%d\n",
+ fw_info->ish_fw_version.major,
+ fw_info->ish_fw_version.minor,
+ fw_info->ish_fw_version.hotfix,
+ fw_info->ish_fw_version.build,
+ fw_info->protocol_version,
+ fw_info->ldr_version.value);
+
+ dev_dbg(cl_data_to_dev(client_data),
+ "loader_capability: max_fw_image_size=0x%x xfer_mode=%d max_dma_buf_size=0x%x dma_buf_size_limit=0x%x\n",
+ fw_info->ldr_capability.max_fw_image_size,
+ fw_info->ldr_capability.xfer_mode,
+ fw_info->ldr_capability.max_dma_buf_size,
+ dma_buf_size_limit);
+
+ /* Sanity checks */
+ if (fw_info->ldr_capability.max_fw_image_size < fw->size) {
+ dev_err(cl_data_to_dev(client_data),
+ "ISH firmware size %zu is greater than Shim firmware loader max supported %d\n",
+ fw->size,
+ fw_info->ldr_capability.max_fw_image_size);
+ return -ENOSPC;
+ }
+
+ /* For DMA the buffer size should be multiple of cacheline size */
+ if ((fw_info->ldr_capability.xfer_mode & LOADER_XFER_MODE_DIRECT_DMA) &&
+ (fw_info->ldr_capability.max_dma_buf_size % L1_CACHE_BYTES)) {
+ dev_err(cl_data_to_dev(client_data),
+ "Shim firmware loader buffer size %d should be multipe of cacheline\n",
+ fw_info->ldr_capability.max_dma_buf_size);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * ish_fw_xfer_ishtp() Loads ISH firmware using ishtp interface
+ * @client_data: Client data instance
+ * @fw: Pointer to firmware data struct in host memory
+ *
+ * This function uses ISH-TP to transfer ISH firmware from host to
+ * ISH SRAM. Lower layers may use IPC or DMA depending on firmware
+ * support.
+ *
+ * Return: 0 for success, negative error code for failure.
+ */
+static int ish_fw_xfer_ishtp(struct ishtp_cl_data *client_data,
+ const struct firmware *fw)
+{
+ int rv;
+ u32 fragment_offset, fragment_size, payload_max_size;
+ struct loader_xfer_ipc_fragment *ldr_xfer_ipc_frag;
+ struct loader_msg_hdr ldr_xfer_ipc_ack;
+
+ payload_max_size =
+ LOADER_SHIM_IPC_BUF_SIZE - IPC_FRAGMENT_DATA_PREAMBLE;
+
+ ldr_xfer_ipc_frag = kzalloc(LOADER_SHIM_IPC_BUF_SIZE, GFP_KERNEL);
+ if (!ldr_xfer_ipc_frag) {
+ client_data->flag_retry = true;
+ return -ENOMEM;
+ }
+
+ ldr_xfer_ipc_frag->fragment.hdr.command = LOADER_CMD_XFER_FRAGMENT;
+ ldr_xfer_ipc_frag->fragment.xfer_mode = LOADER_XFER_MODE_ISHTP;
+
+ /* Break the firmware image into fragments and send as ISH-TP payload */
+ fragment_offset = 0;
+ while (fragment_offset < fw->size) {
+ if (fragment_offset + payload_max_size < fw->size) {
+ fragment_size = payload_max_size;
+ ldr_xfer_ipc_frag->fragment.is_last = 0;
+ } else {
+ fragment_size = fw->size - fragment_offset;
+ ldr_xfer_ipc_frag->fragment.is_last = 1;
+ }
+
+ ldr_xfer_ipc_frag->fragment.offset = fragment_offset;
+ ldr_xfer_ipc_frag->fragment.size = fragment_size;
+ memcpy(ldr_xfer_ipc_frag->data,
+ &fw->data[fragment_offset],
+ fragment_size);
+
+ dev_dbg(cl_data_to_dev(client_data),
+ "xfer_mode=ipc offset=0x%08x size=0x%08x is_last=%d\n",
+ ldr_xfer_ipc_frag->fragment.offset,
+ ldr_xfer_ipc_frag->fragment.size,
+ ldr_xfer_ipc_frag->fragment.is_last);
+
+ rv = loader_cl_send(client_data,
+ (u8 *)ldr_xfer_ipc_frag,
+ IPC_FRAGMENT_DATA_PREAMBLE + fragment_size,
+ (u8 *)&ldr_xfer_ipc_ack,
+ sizeof(ldr_xfer_ipc_ack));
+ if (rv < 0) {
+ client_data->flag_retry = true;
+ goto end_err_resp_buf_release;
+ }
+
+ fragment_offset += fragment_size;
+ }
+
+ kfree(ldr_xfer_ipc_frag);
+ return 0;
+
+end_err_resp_buf_release:
+ /* Free ISH buffer if not done already, in error case */
+ kfree(ldr_xfer_ipc_frag);
+ return rv;
+}
+
+/**
+ * ish_fw_xfer_direct_dma() - Loads ISH firmware using direct dma
+ * @client_data: Client data instance
+ * @fw: Pointer to firmware data struct in host memory
+ * @fw_info: Loader firmware properties
+ *
+ * Host firmware load is a unique case where we need to download
+ * a large firmware image (200+ Kb). This function implements
+ * direct DMA transfer in kernel and ISH firmware. This allows
+ * us to overcome the ISH-TP 4 Kb limit, and allows us to DMA
+ * directly to ISH UMA at location of choice.
+ * Function depends on corresponding support in ISH firmware.
+ *
+ * Return: 0 for success, negative error code for failure.
+ */
+static int ish_fw_xfer_direct_dma(struct ishtp_cl_data *client_data,
+ const struct firmware *fw,
+ const struct shim_fw_info fw_info)
+{
+ int rv;
+ void *dma_buf;
+ dma_addr_t dma_buf_phy;
+ u32 fragment_offset, fragment_size, payload_max_size;
+ struct loader_msg_hdr ldr_xfer_dma_frag_ack;
+ struct loader_xfer_dma_fragment ldr_xfer_dma_frag;
+ struct device *devc = ishtp_get_pci_device(client_data->cl_device);
+ u32 shim_fw_buf_size =
+ fw_info.ldr_capability.max_dma_buf_size;
+
+ /*
+ * payload_max_size should be set to minimum of
+ * (1) Size of firmware to be loaded,
+ * (2) Max DMA buffer size supported by Shim firmware,
+ * (3) DMA buffer size limit set by boot_param dma_buf_size_limit.
+ */
+ payload_max_size = min3(fw->size,
+ (size_t)shim_fw_buf_size,
+ (size_t)dma_buf_size_limit);
+
+ /*
+ * Buffer size should be multiple of cacheline size
+ * if it's not, select the previous cacheline boundary.
+ */
+ payload_max_size &= ~(L1_CACHE_BYTES - 1);
+
+ dma_buf = kmalloc(payload_max_size, GFP_KERNEL | GFP_DMA32);
+ if (!dma_buf) {
+ client_data->flag_retry = true;
+ return -ENOMEM;
+ }
+
+ dma_buf_phy = dma_map_single(devc, dma_buf, payload_max_size,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(devc, dma_buf_phy)) {
+ dev_err(cl_data_to_dev(client_data), "DMA map failed\n");
+ client_data->flag_retry = true;
+ rv = -ENOMEM;
+ goto end_err_dma_buf_release;
+ }
+
+ ldr_xfer_dma_frag.fragment.hdr.command = LOADER_CMD_XFER_FRAGMENT;
+ ldr_xfer_dma_frag.fragment.xfer_mode = LOADER_XFER_MODE_DIRECT_DMA;
+ ldr_xfer_dma_frag.ddr_phys_addr = (u64)dma_buf_phy;
+
+ /* Send the firmware image in chucks of payload_max_size */
+ fragment_offset = 0;
+ while (fragment_offset < fw->size) {
+ if (fragment_offset + payload_max_size < fw->size) {
+ fragment_size = payload_max_size;
+ ldr_xfer_dma_frag.fragment.is_last = 0;
+ } else {
+ fragment_size = fw->size - fragment_offset;
+ ldr_xfer_dma_frag.fragment.is_last = 1;
+ }
+
+ ldr_xfer_dma_frag.fragment.offset = fragment_offset;
+ ldr_xfer_dma_frag.fragment.size = fragment_size;
+ memcpy(dma_buf, &fw->data[fragment_offset], fragment_size);
+
+ dma_sync_single_for_device(devc, dma_buf_phy,
+ payload_max_size,
+ DMA_TO_DEVICE);
+
+ /*
+ * Flush cache here because the dma_sync_single_for_device()
+ * does not do for x86.
+ */
+ clflush_cache_range(dma_buf, payload_max_size);
+
+ dev_dbg(cl_data_to_dev(client_data),
+ "xfer_mode=dma offset=0x%08x size=0x%x is_last=%d ddr_phys_addr=0x%016llx\n",
+ ldr_xfer_dma_frag.fragment.offset,
+ ldr_xfer_dma_frag.fragment.size,
+ ldr_xfer_dma_frag.fragment.is_last,
+ ldr_xfer_dma_frag.ddr_phys_addr);
+
+ rv = loader_cl_send(client_data,
+ (u8 *)&ldr_xfer_dma_frag,
+ sizeof(ldr_xfer_dma_frag),
+ (u8 *)&ldr_xfer_dma_frag_ack,
+ sizeof(ldr_xfer_dma_frag_ack));
+ if (rv < 0) {
+ client_data->flag_retry = true;
+ goto end_err_resp_buf_release;
+ }
+
+ fragment_offset += fragment_size;
+ }
+
+ dma_unmap_single(devc, dma_buf_phy, payload_max_size, DMA_TO_DEVICE);
+ kfree(dma_buf);
+ return 0;
+
+end_err_resp_buf_release:
+ /* Free ISH buffer if not done already, in error case */
+ dma_unmap_single(devc, dma_buf_phy, payload_max_size, DMA_TO_DEVICE);
+end_err_dma_buf_release:
+ kfree(dma_buf);
+ return rv;
+}
+
+/**
+ * ish_fw_start() Start executing ISH main firmware
+ * @client_data: client data instance
+ *
+ * This function sends message to Shim firmware loader to start
+ * the execution of ISH main firmware.
+ *
+ * Return: 0 for success, negative error code for failure.
+ */
+static int ish_fw_start(struct ishtp_cl_data *client_data)
+{
+ struct loader_start ldr_start;
+ struct loader_msg_hdr ldr_start_ack;
+
+ memset(&ldr_start, 0, sizeof(ldr_start));
+ ldr_start.hdr.command = LOADER_CMD_START;
+ return loader_cl_send(client_data,
+ (u8 *)&ldr_start,
+ sizeof(ldr_start),
+ (u8 *)&ldr_start_ack,
+ sizeof(ldr_start_ack));
+}
+
+/**
+ * load_fw_from_host() Loads ISH firmware from host
+ * @client_data: Client data instance
+ *
+ * This function loads the ISH firmware to ISH SRAM and starts execution
+ *
+ * Return: 0 for success, negative error code for failure.
+ */
+static int load_fw_from_host(struct ishtp_cl_data *client_data)
+{
+ int rv;
+ u32 xfer_mode;
+ char *filename;
+ const struct firmware *fw;
+ struct shim_fw_info fw_info;
+ struct ishtp_cl *loader_ishtp_cl = client_data->loader_ishtp_cl;
+
+ client_data->flag_retry = false;
+
+ filename = kzalloc(FILENAME_SIZE, GFP_KERNEL);
+ if (!filename) {
+ client_data->flag_retry = true;
+ rv = -ENOMEM;
+ goto end_error;
+ }
+
+ /* Get filename of the ISH firmware to be loaded */
+ rv = get_firmware_variant(client_data, filename);
+ if (rv < 0)
+ goto end_err_filename_buf_release;
+
+ rv = request_firmware(&fw, filename, cl_data_to_dev(client_data));
+ if (rv < 0)
+ goto end_err_filename_buf_release;
+
+ /* Step 1: Query Shim firmware loader properties */
+
+ rv = ish_query_loader_prop(client_data, fw, &fw_info);
+ if (rv < 0)
+ goto end_err_fw_release;
+
+ /* Step 2: Send the main firmware image to be loaded, to ISH SRAM */
+
+ xfer_mode = fw_info.ldr_capability.xfer_mode;
+ if (xfer_mode & LOADER_XFER_MODE_DIRECT_DMA) {
+ rv = ish_fw_xfer_direct_dma(client_data, fw, fw_info);
+ } else if (xfer_mode & LOADER_XFER_MODE_ISHTP) {
+ rv = ish_fw_xfer_ishtp(client_data, fw);
+ } else {
+ dev_err(cl_data_to_dev(client_data),
+ "No transfer mode selected in firmware\n");
+ rv = -EINVAL;
+ }
+ if (rv < 0)
+ goto end_err_fw_release;
+
+ /* Step 3: Start ISH main firmware exeuction */
+
+ rv = ish_fw_start(client_data);
+ if (rv < 0)
+ goto end_err_fw_release;
+
+ release_firmware(fw);
+ kfree(filename);
+ dev_info(cl_data_to_dev(client_data), "ISH firmware %s loaded\n",
+ filename);
+ return 0;
+
+end_err_fw_release:
+ release_firmware(fw);
+end_err_filename_buf_release:
+ kfree(filename);
+end_error:
+ /* Keep a count of retries, and give up after 3 attempts */
+ if (client_data->flag_retry &&
+ client_data->retry_count++ < MAX_LOAD_ATTEMPTS) {
+ dev_warn(cl_data_to_dev(client_data),
+ "ISH host firmware load failed %d. Resetting ISH, and trying again..\n",
+ rv);
+ ish_hw_reset(ishtp_get_ishtp_device(loader_ishtp_cl));
+ } else {
+ dev_err(cl_data_to_dev(client_data),
+ "ISH host firmware load failed %d\n", rv);
+ }
+ return rv;
+}
+
+static void load_fw_from_host_handler(struct work_struct *work)
+{
+ struct ishtp_cl_data *client_data;
+
+ client_data = container_of(work, struct ishtp_cl_data,
+ work_fw_load);
+ load_fw_from_host(client_data);
+}
+
+/**
+ * loader_init() - Init function for ISH-TP client
+ * @loader_ishtp_cl: ISH-TP client instance
+ * @reset: true if called for init after reset
+ *
+ * Return: 0 for success, negative error code for failure
+ */
+static int loader_init(struct ishtp_cl *loader_ishtp_cl, int reset)
+{
+ int rv;
+ struct ishtp_fw_client *fw_client;
+ struct ishtp_cl_data *client_data =
+ ishtp_get_client_data(loader_ishtp_cl);
+
+ dev_dbg(cl_data_to_dev(client_data), "reset flag: %d\n", reset);
+
+ rv = ishtp_cl_link(loader_ishtp_cl);
+ if (rv < 0) {
+ dev_err(cl_data_to_dev(client_data), "ishtp_cl_link failed\n");
+ return rv;
+ }
+
+ /* Connect to firmware client */
+ ishtp_set_tx_ring_size(loader_ishtp_cl, LOADER_CL_TX_RING_SIZE);
+ ishtp_set_rx_ring_size(loader_ishtp_cl, LOADER_CL_RX_RING_SIZE);
+
+ fw_client =
+ ishtp_fw_cl_get_client(ishtp_get_ishtp_device(loader_ishtp_cl),
+ &loader_ishtp_guid);
+ if (!fw_client) {
+ dev_err(cl_data_to_dev(client_data),
+ "ISH client uuid not found\n");
+ rv = -ENOENT;
+ goto err_cl_unlink;
+ }
+
+ ishtp_cl_set_fw_client_id(loader_ishtp_cl,
+ ishtp_get_fw_client_id(fw_client));
+ ishtp_set_connection_state(loader_ishtp_cl, ISHTP_CL_CONNECTING);
+
+ rv = ishtp_cl_connect(loader_ishtp_cl);
+ if (rv < 0) {
+ dev_err(cl_data_to_dev(client_data), "Client connect fail\n");
+ goto err_cl_unlink;
+ }
+
+ dev_dbg(cl_data_to_dev(client_data), "Client connected\n");
+
+ ishtp_register_event_cb(client_data->cl_device, loader_cl_event_cb);
+
+ return 0;
+
+err_cl_unlink:
+ ishtp_cl_unlink(loader_ishtp_cl);
+ return rv;
+}
+
+static void loader_deinit(struct ishtp_cl *loader_ishtp_cl)
+{
+ ishtp_set_connection_state(loader_ishtp_cl, ISHTP_CL_DISCONNECTING);
+ ishtp_cl_disconnect(loader_ishtp_cl);
+ ishtp_cl_unlink(loader_ishtp_cl);
+ ishtp_cl_flush_queues(loader_ishtp_cl);
+
+ /* Disband and free all Tx and Rx client-level rings */
+ ishtp_cl_free(loader_ishtp_cl);
+}
+
+static void reset_handler(struct work_struct *work)
+{
+ int rv;
+ struct ishtp_cl_data *client_data;
+ struct ishtp_cl *loader_ishtp_cl;
+ struct ishtp_cl_device *cl_device;
+
+ client_data = container_of(work, struct ishtp_cl_data,
+ work_ishtp_reset);
+
+ loader_ishtp_cl = client_data->loader_ishtp_cl;
+ cl_device = client_data->cl_device;
+
+ /* Unlink, flush queues & start again */
+ ishtp_cl_unlink(loader_ishtp_cl);
+ ishtp_cl_flush_queues(loader_ishtp_cl);
+ ishtp_cl_free(loader_ishtp_cl);
+
+ loader_ishtp_cl = ishtp_cl_allocate(cl_device);
+ if (!loader_ishtp_cl)
+ return;
+
+ ishtp_set_drvdata(cl_device, loader_ishtp_cl);
+ ishtp_set_client_data(loader_ishtp_cl, client_data);
+ client_data->loader_ishtp_cl = loader_ishtp_cl;
+ client_data->cl_device = cl_device;
+
+ rv = loader_init(loader_ishtp_cl, 1);
+ if (rv < 0) {
+ dev_err(ishtp_device(cl_device), "Reset Failed\n");
+ return;
+ }
+
+ /* ISH firmware loading from host */
+ load_fw_from_host(client_data);
+}
+
+/**
+ * loader_ishtp_cl_probe() - ISH-TP client driver probe
+ * @cl_device: ISH-TP client device instance
+ *
+ * This function gets called on device create on ISH-TP bus
+ *
+ * Return: 0 for success, negative error code for failure
+ */
+static int loader_ishtp_cl_probe(struct ishtp_cl_device *cl_device)
+{
+ struct ishtp_cl *loader_ishtp_cl;
+ struct ishtp_cl_data *client_data;
+ int rv;
+
+ client_data = devm_kzalloc(ishtp_device(cl_device),
+ sizeof(*client_data),
+ GFP_KERNEL);
+ if (!client_data)
+ return -ENOMEM;
+
+ loader_ishtp_cl = ishtp_cl_allocate(cl_device);
+ if (!loader_ishtp_cl)
+ return -ENOMEM;
+
+ ishtp_set_drvdata(cl_device, loader_ishtp_cl);
+ ishtp_set_client_data(loader_ishtp_cl, client_data);
+ client_data->loader_ishtp_cl = loader_ishtp_cl;
+ client_data->cl_device = cl_device;
+
+ init_waitqueue_head(&client_data->response.wait_queue);
+
+ INIT_WORK(&client_data->work_ishtp_reset,
+ reset_handler);
+ INIT_WORK(&client_data->work_fw_load,
+ load_fw_from_host_handler);
+
+ rv = loader_init(loader_ishtp_cl, 0);
+ if (rv < 0) {
+ ishtp_cl_free(loader_ishtp_cl);
+ return rv;
+ }
+ ishtp_get_device(cl_device);
+
+ client_data->retry_count = 0;
+
+ /* ISH firmware loading from host */
+ schedule_work(&client_data->work_fw_load);
+
+ return 0;
+}
+
+/**
+ * loader_ishtp_cl_remove() - ISH-TP client driver remove
+ * @cl_device: ISH-TP client device instance
+ *
+ * This function gets called on device remove on ISH-TP bus
+ *
+ * Return: 0
+ */
+static int loader_ishtp_cl_remove(struct ishtp_cl_device *cl_device)
+{
+ struct ishtp_cl_data *client_data;
+ struct ishtp_cl *loader_ishtp_cl = ishtp_get_drvdata(cl_device);
+
+ client_data = ishtp_get_client_data(loader_ishtp_cl);
+
+ /*
+ * The sequence of the following two cancel_work_sync() is
+ * important. The work_fw_load can in turn schedue
+ * work_ishtp_reset, so first cancel work_fw_load then
+ * cancel work_ishtp_reset.
+ */
+ cancel_work_sync(&client_data->work_fw_load);
+ cancel_work_sync(&client_data->work_ishtp_reset);
+ loader_deinit(loader_ishtp_cl);
+ ishtp_put_device(cl_device);
+
+ return 0;
+}
+
+/**
+ * loader_ishtp_cl_reset() - ISH-TP client driver reset
+ * @cl_device: ISH-TP client device instance
+ *
+ * This function gets called on device reset on ISH-TP bus
+ *
+ * Return: 0
+ */
+static int loader_ishtp_cl_reset(struct ishtp_cl_device *cl_device)
+{
+ struct ishtp_cl_data *client_data;
+ struct ishtp_cl *loader_ishtp_cl = ishtp_get_drvdata(cl_device);
+
+ client_data = ishtp_get_client_data(loader_ishtp_cl);
+
+ schedule_work(&client_data->work_ishtp_reset);
+
+ return 0;
+}
+
+static struct ishtp_cl_driver loader_ishtp_cl_driver = {
+ .name = "ish-loader",
+ .guid = &loader_ishtp_guid,
+ .probe = loader_ishtp_cl_probe,
+ .remove = loader_ishtp_cl_remove,
+ .reset = loader_ishtp_cl_reset,
+};
+
+static int __init ish_loader_init(void)
+{
+ return ishtp_cl_driver_register(&loader_ishtp_cl_driver, THIS_MODULE);
+}
+
+static void __exit ish_loader_exit(void)
+{
+ ishtp_cl_driver_unregister(&loader_ishtp_cl_driver);
+}
+
+late_initcall(ish_loader_init);
+module_exit(ish_loader_exit);
+
+module_param(dma_buf_size_limit, int, 0644);
+MODULE_PARM_DESC(dma_buf_size_limit, "Limit the DMA buf size to this value in bytes");
+
+MODULE_DESCRIPTION("ISH ISH-TP Host firmware Loader Client Driver");
+MODULE_AUTHOR("Rushikesh S Kadam <rushikesh.s.kadam@intel.com>");
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("ishtp:*");
--
2.16.4