From: Paolo Bonzini <pbonzini@redhat.com>
Date: Tue, 6 Jun 2017 12:57:06 +0200
Subject: KVM: VMX: simplify and fix vmx_vcpu_pi_load
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Patch-mainline: v4.14-rc3
Git-commit: 31afb2ea2b10a7d17ce3db4cdb0a12b63b2fe08a
References: bsc#1077761

The simplify part: do not touch pi_desc.nv, we can set it when the
VCPU is first created.  Likewise, pi_desc.sn is only handled by
vmx_vcpu_pi_load, do not touch it in __pi_post_block.

The fix part: do not check kvm_arch_has_assigned_device, instead
check the SN bit to figure out whether vmx_vcpu_pi_put ran before.
This matches what the previous patch did in pi_post_block.

Cc: Huangweidong <weidong.huang@huawei.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: wangxin <wangxinxin.wang@huawei.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Tested-by: Longpeng (Mike) <longpeng2@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Alexander Graf <agraf@suse.de>
---
 arch/x86/kvm/vmx.c |   68 +++++++++++++++++++++++++++--------------------------
 1 file changed, 35 insertions(+), 33 deletions(-)

--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2199,43 +2199,41 @@
 	struct pi_desc old, new;
 	unsigned int dest;
 
-	if (!kvm_arch_has_assigned_device(vcpu->kvm) ||
-		!irq_remapping_cap(IRQ_POSTING_CAP)  ||
-		!kvm_vcpu_apicv_active(vcpu))
+	/*
+	 * In case of hot-plug or hot-unplug, we may have to undo
+	 * vmx_vcpu_pi_put even if there is no assigned device.  And we
+	 * always keep PI.NDST up to date for simplicity: it makes the
+	 * code easier, and CPU migration is not a fast path.
+	 */
+	if (!pi_test_sn(pi_desc) && vcpu->cpu == cpu)
+		return;
+
+	/*
+	 * First handle the simple case where no cmpxchg is necessary; just
+	 * allow posting non-urgent interrupts.
+	 *
+	 * If the 'nv' field is POSTED_INTR_WAKEUP_VECTOR, do not change
+	 * PI.NDST: pi_post_block will do it for us and the wakeup_handler
+	 * expects the VCPU to be on the blocked_vcpu_list that matches
+	 * PI.NDST.
+	 */
+	if (pi_desc->nv == POSTED_INTR_WAKEUP_VECTOR ||
+	    vcpu->cpu == cpu) {
+		pi_clear_sn(pi_desc);
 		return;
+	}
 
+	/* The full case.  */
 	do {
 		old.control = new.control = pi_desc->control;
 
-		/*
-		 * If 'nv' field is POSTED_INTR_WAKEUP_VECTOR, there
-		 * are two possible cases:
-		 * 1. After running 'pre_block', context switch
-		 *    happened. For this case, 'sn' was set in
-		 *    vmx_vcpu_put(), so we need to clear it here.
-		 * 2. After running 'pre_block', we were blocked,
-		 *    and woken up by some other guy. For this case,
-		 *    we don't need to do anything, 'pi_post_block'
-		 *    will do everything for us. However, we cannot
-		 *    check whether it is case #1 or case #2 here
-		 *    (maybe, not needed), so we also clear sn here,
-		 *    I think it is not a big deal.
-		 */
-		if (pi_desc->nv != POSTED_INTR_WAKEUP_VECTOR) {
-			if (vcpu->cpu != cpu) {
-				dest = cpu_physical_id(cpu);
-
-				if (x2apic_enabled())
-					new.ndst = dest;
-				else
-					new.ndst = (dest << 8) & 0xFF00;
-			}
+		dest = cpu_physical_id(cpu);
 
-			/* set 'NV' to 'notification vector' */
-			new.nv = POSTED_INTR_VECTOR;
-		}
+		if (x2apic_enabled())
+			new.ndst = dest;
+		else
+			new.ndst = (dest << 8) & 0xFF00;
 
-		/* Allow posting non-urgent interrupts */
 		new.sn = 0;
 	} while (cmpxchg(&pi_desc->control, old.control,
 			new.control) != old.control);
@@ -9565,6 +9563,13 @@
 
 	vmx->msr_ia32_feature_control_valid_bits = FEATURE_CONTROL_LOCKED;
 
+	/*
+	 * Enforce invariant: pi_desc.nv is always either POSTED_INTR_VECTOR
+	 * or POSTED_INTR_WAKEUP_VECTOR.
+	 */
+	vmx->pi_desc.nv = POSTED_INTR_VECTOR;
+	vmx->pi_desc.sn = 1;
+
 	return &vmx->vcpu;
 
 free_vmcs:
@@ -11697,9 +11702,6 @@
 		else
 			new.ndst = (dest << 8) & 0xFF00;
 
-		/* Allow posting non-urgent interrupts */
-		new.sn = 0;
-
 		/* set 'NV' to 'notification vector' */
 		new.nv = POSTED_INTR_VECTOR;
 	} while (cmpxchg(&pi_desc->control, old.control,