From: Ayush Sawal <ayush.sawal@chelsio.com>
Date: Mon, 15 Feb 2021 17:12:26 +0530
Subject: cxgb4/chtls/cxgbit: Keeping the max ofld immediate data size same in
 cxgb4 and ulds
Patch-mainline: v5.12-rc1
Git-commit: 2355a6773a2cb0d2dce13432dde78497f1d6617b
References: bsc#1104270 FATE#325931

The Max imm data size in cxgb4 is not similar to the max imm data size
in the chtls. This caused an mismatch in output of is_ofld_imm() of
cxgb4 and chtls. So fixed this by keeping the max wreq size of imm data
same in both chtls and cxgb4 as MAX_IMM_OFLD_TX_DATA_WR_LEN.

As cxgb4's max imm. data value for ofld packets is changed to
MAX_IMM_OFLD_TX_DATA_WR_LEN. Using the same in cxgbit also.

Fixes: 36bedb3f2e5b8 ("crypto: chtls - Inline TLS record Tx")
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
 drivers/crypto/chelsio/chtls/chtls_cm.h        |    3 ---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h |    3 +++
 drivers/net/ethernet/chelsio/cxgb4/sge.c       |   11 ++++++++---
 drivers/target/iscsi/cxgbit/cxgbit_target.c    |    3 +--
 4 files changed, 12 insertions(+), 8 deletions(-)

--- a/drivers/crypto/chelsio/chtls/chtls_cm.h
+++ b/drivers/crypto/chelsio/chtls/chtls_cm.h
@@ -53,9 +53,6 @@
 #define MIN_RCV_WND (24 * 1024U)
 #define LOOPBACK(x)     (((x) & htonl(0xff000000)) == htonl(0x7f000000))
 
-/* ulp_mem_io + ulptx_idata + payload + padding */
-#define MAX_IMM_ULPTX_WR_LEN (32 + 8 + 256 + 8)
-
 /* for TX: a skb must have a headroom of at least TX_HEADER_LEN bytes */
 #define TX_HEADER_LEN \
 	(sizeof(struct fw_ofld_tx_data_wr) + sizeof(struct sge_opaque_hdr))
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
@@ -44,6 +44,9 @@
 
 #define MAX_ULD_QSETS 16
 
+/* ulp_mem_io + ulptx_idata + payload + padding */
+#define MAX_IMM_ULPTX_WR_LEN (32 + 8 + 256 + 8)
+
 /* CPL message priority levels */
 enum {
 	CPL_PRIORITY_DATA     = 0,  /* data messages */
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -2158,17 +2158,22 @@ int t4_mgmt_tx(struct adapter *adap, str
  *	@skb: the packet
  *
  *	Returns true if a packet can be sent as an offload WR with immediate
- *	data.  We currently use the same limit as for Ethernet packets.
+ *	data.
+ *	FW_OFLD_TX_DATA_WR limits the payload to 255 bytes due to 8-bit field.
+ *      However, FW_ULPTX_WR commands have a 256 byte immediate only
+ *      payload limit.
  */
 static inline int is_ofld_imm(const struct sk_buff *skb)
 {
 	struct work_request_hdr *req = (struct work_request_hdr *)skb->data;
 	unsigned long opcode = FW_WR_OP_G(ntohl(req->wr_hi));
 
-	if (opcode == FW_CRYPTO_LOOKASIDE_WR)
+	if (unlikely(opcode == FW_ULPTX_WR))
+		return skb->len <= MAX_IMM_ULPTX_WR_LEN;
+	else if (opcode == FW_CRYPTO_LOOKASIDE_WR)
 		return skb->len <= SGE_MAX_WR_LEN;
 	else
-		return skb->len <= MAX_IMM_TX_PKT_LEN;
+		return skb->len <= MAX_IMM_OFLD_TX_DATA_WR_LEN;
 }
 
 /**
--- a/drivers/target/iscsi/cxgbit/cxgbit_target.c
+++ b/drivers/target/iscsi/cxgbit/cxgbit_target.c
@@ -89,8 +89,7 @@ static int cxgbit_is_ofld_imm(const stru
 	if (likely(cxgbit_skcb_flags(skb) & SKCBF_TX_ISO))
 		length += sizeof(struct cpl_tx_data_iso);
 
-#define MAX_IMM_TX_PKT_LEN	256
-	return length <= MAX_IMM_TX_PKT_LEN;
+	return length <= MAX_IMM_OFLD_TX_DATA_WR_LEN;
 }
 
 /*