From 7eb2c4dd54ff841f2fe509a84973eb25fa20bda2 Mon Sep 17 00:00:00 2001
From: Imre Deak <imre.deak@intel.com>
Date: Mon, 16 Apr 2018 18:53:09 +0300
Subject: [PATCH] drm/i915: Fix LSPCON TMDS output buffer enabling from low-power state
Mime-version: 1.0
Content-type: text/plain; charset=UTF-8
Content-transfer-encoding: 8bit
Git-commit: 7eb2c4dd54ff841f2fe509a84973eb25fa20bda2
Patch-mainline: v4.17-rc2
References: bsc#1051510

LSPCON adapters in low-power state may ignore the first I2C write during
TMDS output buffer enabling, resulting in a blank screen even with an
otherwise enabled pipe. Fix this by reading back and validating the
written value a few times.

The problem was noticed on GLK machines with an onboard LSPCON adapter
after entering/exiting DC5 power state. Doing an I2C read of the adapter
ID as the first transaction - instead of the I2C write to enable the
TMDS buffers - returns the correct value. Based on this we assume that
the transaction itself is sent properly, it's only the adapter that is
not ready for some reason to accept this first write after waking from
low-power state. In my case the second I2C write attempt always
succeeded.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105854
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180416155309.11100-1-imre.deak@intel.com
Acked-by: Takashi Iwai <tiwai@suse.de>

---
 drivers/gpu/drm/drm_dp_dual_mode_helper.c |   39 ++++++++++++++++++++++++------
 1 file changed, 32 insertions(+), 7 deletions(-)

--- a/drivers/gpu/drm/drm_dp_dual_mode_helper.c
+++ b/drivers/gpu/drm/drm_dp_dual_mode_helper.c
@@ -350,19 +350,44 @@ int drm_dp_dual_mode_set_tmds_output(enu
 {
 	uint8_t tmds_oen = enable ? 0 : DP_DUAL_MODE_TMDS_DISABLE;
 	ssize_t ret;
+	int retry;
 
 	if (type < DRM_DP_DUAL_MODE_TYPE2_DVI)
 		return 0;
 
-	ret = drm_dp_dual_mode_write(adapter, DP_DUAL_MODE_TMDS_OEN,
-				     &tmds_oen, sizeof(tmds_oen));
-	if (ret) {
-		DRM_DEBUG_KMS("Failed to %s TMDS output buffers\n",
-			      enable ? "enable" : "disable");
-		return ret;
+	/*
+	 * LSPCON adapters in low-power state may ignore the first write, so
+	 * read back and verify the written value a few times.
+	 */
+	for (retry = 0; retry < 3; retry++) {
+		uint8_t tmp;
+
+		ret = drm_dp_dual_mode_write(adapter, DP_DUAL_MODE_TMDS_OEN,
+					     &tmds_oen, sizeof(tmds_oen));
+		if (ret) {
+			DRM_DEBUG_KMS("Failed to %s TMDS output buffers (%d attempts)\n",
+				      enable ? "enable" : "disable",
+				      retry + 1);
+			return ret;
+		}
+
+		ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_TMDS_OEN,
+					    &tmp, sizeof(tmp));
+		if (ret) {
+			DRM_DEBUG_KMS("I2C read failed during TMDS output buffer %s (%d attempts)\n",
+				      enable ? "enabling" : "disabling",
+				      retry + 1);
+			return ret;
+		}
+
+		if (tmp == tmds_oen)
+			return 0;
 	}
 
-	return 0;
+	DRM_DEBUG_KMS("I2C write value mismatch during TMDS output buffer %s\n",
+		      enable ? "enabling" : "disabling");
+
+	return -EIO;
 }
 EXPORT_SYMBOL(drm_dp_dual_mode_set_tmds_output);