From: Alexander Duyck <alexander.h.duyck@intel.com>
Date: Tue, 14 Nov 2017 07:00:46 -0500
Subject: i40evf: Drop i40evf_fire_sw_int as it is prone to races
Patch-mainline: v4.16-rc1
Git-commit: a6cab7d7f9c8c1522444fee072c64dcff4392a3c
References: bsc#1101816 FATE#325147 FATE#325149

Having the interrupts firing while we are polling causes extra overhead and
isn't needed for most systems out there. If an interrupt is lost us
experiencing a 2s latency spike before recovering is still not acceptable
and masks the issue. We are better off just identifying systems that lose
interrupts and instead enable workarounds for those systems.

To that end I am dropping the code that was strobing the interrupts as
there is a narrow window where having them enabled can actually cause
race issues anyway where a few stray packets might get misses if the
interrupt is re-enabled and fires before we call napi_complete.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
 drivers/net/ethernet/intel/i40evf/i40evf_main.c |   34 ------------------------
 1 file changed, 34 deletions(-)

--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -282,33 +282,6 @@ void i40evf_irq_enable_queues(struct i40
 }
 
 /**
- * i40evf_fire_sw_int - Generate SW interrupt for specified vectors
- * @adapter: board private structure
- * @mask: bitmap of vectors to trigger
- **/
-static void i40evf_fire_sw_int(struct i40evf_adapter *adapter, u32 mask)
-{
-	struct i40e_hw *hw = &adapter->hw;
-	int i;
-	u32 dyn_ctl;
-
-	if (mask & 1) {
-		dyn_ctl = rd32(hw, I40E_VFINT_DYN_CTL01);
-		dyn_ctl |= I40E_VFINT_DYN_CTLN1_SWINT_TRIG_MASK |
-			   I40E_VFINT_DYN_CTLN1_ITR_INDX_MASK;
-		wr32(hw, I40E_VFINT_DYN_CTL01, dyn_ctl);
-	}
-	for (i = 1; i < adapter->num_msix_vectors; i++) {
-		if (mask & BIT(i)) {
-			dyn_ctl = rd32(hw, I40E_VFINT_DYN_CTLN1(i - 1));
-			dyn_ctl |= I40E_VFINT_DYN_CTLN1_SWINT_TRIG_MASK |
-				   I40E_VFINT_DYN_CTLN1_ITR_INDX_MASK;
-			wr32(hw, I40E_VFINT_DYN_CTLN1(i - 1), dyn_ctl);
-		}
-	}
-}
-
-/**
  * i40evf_irq_enable - Enable default interrupt generation settings
  * @adapter: board private structure
  * @flush: boolean value whether to run rd32()
@@ -1742,13 +1715,6 @@ static void i40evf_watchdog_task(struct
 	if (adapter->state == __I40EVF_RUNNING)
 		i40evf_request_stats(adapter);
 watchdog_done:
-	if (adapter->state == __I40EVF_RUNNING) {
-		i40evf_irq_enable_queues(adapter, ~0);
-		i40evf_fire_sw_int(adapter, 0xFF);
-	} else {
-		i40evf_fire_sw_int(adapter, 0x1);
-	}
-
 	clear_bit(__I40EVF_IN_CRITICAL_TASK, &adapter->crit_section);
 restart_watchdog:
 	if (adapter->state == __I40EVF_REMOVE)