From: Brett Creeley <brett.creeley@intel.com>
Date: Thu, 28 Feb 2019 15:25:55 -0800
Subject: ice: Add ability to update rx-usecs-high
Patch-mainline: v5.2-rc1
Git-commit: b9c8bb06b53d28c83c47988f645b6cf4543c2685
References: jsc#SLE-4803

Currently the driver allows rx-usecs-high values to be set,
but when querying the device for rx-usecs-high the value
does not stick. This is because it was not yet implemented.
Add code to allow the user to change rx-usecs-high and
use this to set the q_vector's intrl value.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
 drivers/net/ethernet/intel/ice/ice_ethtool.c |   31 ++++++++++++++++++++++++++-
 drivers/net/ethernet/intel/ice/ice_lib.c     |    2 -
 drivers/net/ethernet/intel/ice/ice_lib.h     |    1 
 drivers/net/ethernet/intel/ice/ice_txrx.h    |    1 
 4 files changed, 33 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -2228,12 +2228,18 @@ static int
 ice_get_rc_coalesce(struct ethtool_coalesce *ec, enum ice_container_type c_type,
 		    struct ice_ring_container *rc)
 {
-	struct ice_pf *pf = rc->ring->vsi->back;
+	struct ice_pf *pf;
+
+	if (!rc->ring)
+		return -EINVAL;
+
+	pf = rc->ring->vsi->back;
 
 	switch (c_type) {
 	case ICE_RX_CONTAINER:
 		ec->use_adaptive_rx_coalesce = ITR_IS_DYNAMIC(rc->itr_setting);
 		ec->rx_coalesce_usecs = rc->itr_setting & ~ICE_ITR_DYNAMIC;
+		ec->rx_coalesce_usecs_high = rc->ring->q_vector->intrl;
 		break;
 	case ICE_TX_CONTAINER:
 		ec->use_adaptive_tx_coalesce = ITR_IS_DYNAMIC(rc->itr_setting);
@@ -2342,6 +2348,23 @@ ice_set_rc_coalesce(enum ice_container_t
 
 	switch (c_type) {
 	case ICE_RX_CONTAINER:
+		if (ec->rx_coalesce_usecs_high > ICE_MAX_INTRL ||
+		    (ec->rx_coalesce_usecs_high &&
+		     ec->rx_coalesce_usecs_high < pf->hw.intrl_gran)) {
+			netdev_info(vsi->netdev,
+				    "Invalid value, rx-usecs-high valid values are 0 (disabled), %d-%d\n",
+				    pf->hw.intrl_gran, ICE_MAX_INTRL);
+			return -EINVAL;
+		}
+
+		if (ec->rx_coalesce_usecs_high != rc->ring->q_vector->intrl) {
+			rc->ring->q_vector->intrl = ec->rx_coalesce_usecs_high;
+			wr32(&pf->hw, GLINT_RATE(vsi->hw_base_vector +
+						 rc->ring->q_vector->v_idx),
+			     ice_intrl_usec_to_reg(ec->rx_coalesce_usecs_high,
+						   pf->hw.intrl_gran));
+		}
+
 		if (ec->rx_coalesce_usecs != itr_setting &&
 		    ec->use_adaptive_rx_coalesce) {
 			netdev_info(vsi->netdev,
@@ -2364,6 +2387,12 @@ ice_set_rc_coalesce(enum ice_container_t
 		}
 		break;
 	case ICE_TX_CONTAINER:
+		if (ec->tx_coalesce_usecs_high) {
+			netdev_info(vsi->netdev,
+				    "setting tx-usecs-high is not supported\n");
+			return -EINVAL;
+		}
+
 		if (ec->tx_coalesce_usecs != itr_setting &&
 		    ec->use_adaptive_tx_coalesce) {
 			netdev_info(vsi->netdev,
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -1764,7 +1764,7 @@ int ice_vsi_cfg_lan_txqs(struct ice_vsi
  * This function converts a decimal interrupt rate limit in usecs to the format
  * expected by firmware.
  */
-static u32 ice_intrl_usec_to_reg(u8 intrl, u8 gran)
+u32 ice_intrl_usec_to_reg(u8 intrl, u8 gran)
 {
 	u32 val = intrl / gran;
 
--- a/drivers/net/ethernet/intel/ice/ice_lib.h
+++ b/drivers/net/ethernet/intel/ice/ice_lib.h
@@ -80,4 +80,5 @@ void ice_vsi_free_tx_rings(struct ice_vs
 
 int ice_vsi_manage_rss_lut(struct ice_vsi *vsi, bool ena);
 
+u32 ice_intrl_usec_to_reg(u8 intrl, u8 gran);
 #endif /* !_ICE_LIB_H_ */
--- a/drivers/net/ethernet/intel/ice/ice_txrx.h
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.h
@@ -142,6 +142,7 @@ enum ice_rx_dtype {
 #define ICE_ITR_ADAPTIVE_BULK		0x0000
 
 #define ICE_DFLT_INTRL	0
+#define ICE_MAX_INTRL	236
 
 /* Legacy or Advanced Mode Queue */
 #define ICE_TX_ADVANCED	0