From: Alexander Duyck <alexander.h.duyck@intel.com>
Date: Mon, 4 Jun 2018 16:51:25 -0400
Subject: ixgbe: Move ipsec init function to before reset call
Patch-mainline: v4.18-rc1
Git-commit: de7a7e34e27c029fbb3c4e764db045548629b834
References: bsc#1113994 FATE#326315 FATE#326317
This patch moves the IPsec init function in ixgbe_sw_init. This way it is a
bit more consistent with the placement of similar initialization functions
and is placed before the reset_hw call which should allow us to clean up
any link issues that may be introduced by the fact that we force the link
up if somehow the device had IPsec still enabled before the driver was
loaded.
In addition to the function move it is necessary to change the assignment
of netdev->features. The easiest way to do this is to just test for the
existence of adapter->ipsec and if it is present we set the feature bits.
Fixes: 49a94d74d948 ("ixgbe: add ipsec engine start and stop routines")
Reported-by: Andre Tomt <andre@tomt.net>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c | 7 -------
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 11 +++++++++--
2 files changed, 9 insertions(+), 9 deletions(-)
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
@@ -1025,13 +1025,6 @@ void ixgbe_init_ipsec_offload(struct ixg
adapter->netdev->xfrmdev_ops = &ixgbe_xfrmdev_ops;
-#define IXGBE_ESP_FEATURES (NETIF_F_HW_ESP | \
- NETIF_F_HW_ESP_TX_CSUM | \
- NETIF_F_GSO_ESP)
-
- adapter->netdev->features |= IXGBE_ESP_FEATURES;
- adapter->netdev->hw_enc_features |= IXGBE_ESP_FEATURES;
-
return;
err2:
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -6142,6 +6142,7 @@ static int ixgbe_sw_init(struct ixgbe_ad
#ifdef CONFIG_IXGBE_DCB
ixgbe_init_dcb(adapter);
#endif
+ ixgbe_init_ipsec_offload(adapter);
/* default flow control settings */
hw->fc.requested_mode = ixgbe_fc_full;
@@ -10454,6 +10455,14 @@ skip_sriov:
if (hw->mac.type >= ixgbe_mac_82599EB)
netdev->features |= NETIF_F_SCTP_CRC;
+#ifdef CONFIG_XFRM_OFFLOAD
+#define IXGBE_ESP_FEATURES (NETIF_F_HW_ESP | \
+ NETIF_F_HW_ESP_TX_CSUM | \
+ NETIF_F_GSO_ESP)
+
+ if (adapter->ipsec)
+ netdev->features |= IXGBE_ESP_FEATURES;
+#endif
/* copy netdev features into list of user selectable features */
netdev->hw_features |= netdev->features |
NETIF_F_HW_VLAN_CTAG_FILTER |
@@ -10516,8 +10525,6 @@ skip_sriov:
NETIF_F_FCOE_MTU;
}
#endif /* IXGBE_FCOE */
- ixgbe_init_ipsec_offload(adapter);
-
if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)
netdev->hw_features |= NETIF_F_LRO;
if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)