From 779c79d4b833ec646b0aed878da38edb45bbe156 Mon Sep 17 00:00:00 2001
From: Brad Love <brad@nextdimension.cc>
Date: Tue, 6 Mar 2018 14:15:37 -0500
Subject: [PATCH] media: cx23885: Override 888 ImpactVCBe crystal frequency
Git-commit: 779c79d4b833ec646b0aed878da38edb45bbe156
Patch-mainline: v4.17-rc1
References: bsc#1051510

Hauppauge produced a revision of ImpactVCBe using an 888,
with a 25MHz crystal, instead of using the default third
overtone 50Mhz crystal. This overrides that frequency so
that the cx25840 is properly configured. Without the proper
crystal setup the cx25840 cannot load the firmware or
decode video.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Takashi Iwai <tiwai@suse.de>

---
 drivers/media/pci/cx23885/cx23885-core.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/media/pci/cx23885/cx23885-core.c
+++ b/drivers/media/pci/cx23885/cx23885-core.c
@@ -873,6 +873,16 @@ static int cx23885_dev_setup(struct cx23
 	if (cx23885_boards[dev->board].clk_freq > 0)
 		dev->clk_freq = cx23885_boards[dev->board].clk_freq;
 
+	if (dev->board == CX23885_BOARD_HAUPPAUGE_IMPACTVCBE &&
+		dev->pci->subsystem_device == 0x7137) {
+		/* Hauppauge ImpactVCBe device ID 0x7137 is populated
+		 * with an 888, and a 25Mhz crystal, instead of the
+		 * usual third overtone 50Mhz. The default clock rate must
+		 * be overridden so the cx25840 is properly configured
+		 */
+		dev->clk_freq = 25000000;
+	}
+
 	dev->pci_bus  = dev->pci->bus->number;
 	dev->pci_slot = PCI_SLOT(dev->pci->devfn);
 	cx23885_irq_add(dev, 0x001f00);